• Bulletin of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.174-178
• /
• 1998

Blowout of NR and SBR vulcanizates was studied using a microwave oven. Rubber vulcanizates with different contents of carbon black (0, 30, 50, 70 phr) and various cure systems (conventional, semi-EV, and EV) were prepared. Unfilled rubber vulcanizates did not exploded by irradiation of microwave, while carbon black-filled ones exploded within 10 min. A blowout time of the carbon black-filled rubber vulcanizate decreases with an increase of the content of carbon black in the vulcanizate. A blowout temperature of the organic additive-extracted vulcanizate is higher than that of the not-extracted one, but the extracted vulcanizate blows out faster than the not-extracted one. A blowout temperature of the overcured vulcanizate is higher than that of the undercured one with the same cure system. Temperatures of unfilled SBR vulcanizates heated by the microwave irradiation are lower than those of unfilled NR ones. The carbon black-filled SBR vulcanizates blow out at higher temperatures than the carbon black-filled NR ones. Blowout times of the carbon black-filled SBR vulcanizates are longer than those of the carbon black-filled NR ones.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.133-140
• /
• 1998

The food wastes from a refectory and an eating house were heated in domestic microwave oven(700W) equipped with a fan and the drying rates and destruction of microorganisms were investigated. The drying rate was decreased with the size of food waste and the food wastes in polypropylene basket were dried faster than that on glass dish. The rate was increased with lower initial moisture content. Death rate of microorganisms was also decreased with the size of food waste. Ninety eight percent of reduction in viable cell numbers for the 400g of food waste could be achieved in 240sec of microwave irradiation. The growth of microorganisms in food wastes after microwave irradiated was observed at $32^{\circ}C$ and 95% relative humidity after 7days and the cell numbers in microwave irradiated food wastes were found to be 1/2 ~ 1/20 of the numbers in untreated wastes in accordance with the mass and the length of exposed time to microwave. To minimize the moisture and microorganisms in food wastes, the use of microwave oven are recommended.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.2
• /
• pp.81-84
• /
• 2014

The bipolar resistive switching characteristics of resistive random access memory (ReRAM) based on $HfO_2$ thin films have been demonstrated by using Ag/$HfO_2$/Pt structured ReRAM device. MIcrowave irradiation (MWI) treatment at low temperature was employed in device fabrication with $HfO_2$ thin films as a transition layer. Compared to the as-deposited Ag/$HfO_2$/Pt device, highly improved uniformity characteristics of resistance values and operating voltages were obtained from the MWI treatment Ag/$HfO_2$/Pt ReRAM device. In addition, a stable DC endurance (> 100 cycles) and a high data retention (> $10^4$ sec) were achieved.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.604-608
• /
• 2008

A series of N-alkenyl pyrrolidine-2-thiones were synthesized by the reaction between pyrrolidine-2-thione and various aldehydes such as n-propanal, isopropanal, n-butanal, n-hexanal, n-octanal and phenylacetaldehyde in 32-86% yields using microwave irradiation technique. Only one structural E isomers were predominantly formed within 15 minutes in chlorobenezene?/p-toluenesulfonic acid monohydrate.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.2883-2886
• /
• 2009

A simple, highly efficient and environmentally benign method for the synthesis of 3-styrylchromones from 3-formylchromones and 4-nitrophenylacetic acid/4-nitrotolune in the presence of catalytic amount of basic ionic liquid 1-butyl-3-methylimidazolium hydroxide [(bmim)OH] carried out under the influence of microwave irradiation. This method gives remarkable advantages such as, short reaction times, simple work-up procedure and moderate to good yields. The ionic liquid was successfully reused for four cycles without significant loss of activity.

• Korean Journal of Materials Research
• /
• v.23 no.12
• /
• pp.708-713
• /
• 2013

Graphene oxide has been synthesized by microwave-assisted exfoliation of graphite oxide prepared by modified Hummers method. Graphite was oxidized in a solution of $H_2O_2$ and $KMnO_4$ at $65{\sim}80^{\circ}C$, followed by 10 % $H_2O_2$ solution treatment at $80{\sim}90^{\circ}C$. The graphite oxide was exfoliated under microwave irradiation of 1 kW and was reduced to graphene effectively by hydrazine hydrate ($H_4N_2{\cdot}H_2O$) treatment. The exfoliation of graphene oxide was significantly affected by the microwave irradiation on (heating)/off (cooling) period. An on/off period of 10 s/20 s resulted in much more effective exfoliation than that of 5 s/10 s with the same total treatment time of 10 min. This can be explained by the higher exfoliation temperature of 10 s/20 s. Repetition of the graphite oxidation and exfoliation processes also enhanced the exfoliation of graphene oxide. The thickness of the final graphene products was estimated to be several layers. The D band peaks of the Raman spectra of the final graphene products were quite low, suggesting a high crystal quality.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.8
• /
• pp.1143-1146
• /
• 2004

A simple and effective procedure for conversion of primary, secondary, allylic and benzylic alcohols into the corresponding iodides is described using $CeCl_3{\cdot}7H_2O/NaI\;over\;SiO_2$ under microwave irradiation. Benzylic alcohols are selectively converted in the presence of saturated alcohols into their corresponding benzylic iodides under these conditions.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2341-2344
• /
• 2010

A convenient synthesis of substituted [1,2,4]-triazolo [1',2':1,2]pyrimido[6,5-b]-quinoline 4(a-i) from substituted 2-chloroquinoline-3-carbaldehyde 1(a-i) and 4H-1,2,4-triazol-3-amine 2 by using $SiO_2/K_2CO_3$ under microwave irradiation. This method affords the [1,2,4]-Triazolo [1',2':1,2]pyrimido[6,5-b]-quinoline 4(a-i) under the influence of microwave irradiation in solvent-free conditions within short span (12 - 20 min), & gaves excellent yields (89 - 95%). All the synthesized compounds were further screened for their antibacterial activities. Some of our compounds showed excellent antibacterial activities against control drugs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.211.1-211.1
• /
• 2015

최근 용액 공정을 이용한 산화물 반도체에 대한 연구가 활발히 진행되고 있다. 넓은 밴드갭을 가지고 있는 산화물 반도체는 높은 투과율을 가지고 있어 투명 디스플레이에 적용이 가능하다. 기존의 박막 진공증착 방법은 진공상태를 유지하기 위한 장비의 가격이 비싸며, 대면적의 어려움, 높은 생산단가 등으로 생산율이 높지 않다. 하지만 용액 공정을 이용하면 대기압에서 증착이 가능하고 대면적화가 가능하다. 그리고 각각의 조성비를 조절하는 것이 가능하다. 이러한 장점에도 불구하고, 소자의 신뢰성이나 저온공정은 중요한 이슈이다. Instability는 threshold voltage (Vth)의 shift 및 on/off switching의 신뢰성과 관련된 parameter이다. 용액은 소자의 전기적 특성을 열화 시키는 수분 과 탄소계열의 불순물을 다량 포함 하고 있어 고품질의 박막을 형성하기 위해서는 고온의 열처리가 필요하다. 기존의 열처리는 고온에서 장시간 이루어지기 때문에 유리나 플라스틱, 종이 기판의 소자에서는 불가능하지만 $100^{\circ}C$ 이하의 저온 공정인 microwave를 이용하면 유리, 플라스틱, 종이 기판에서도 적용이 가능하다. 본 연구에서는 산화물 반도체 중에서 InGaZnO (IGZO)를 용액 공정으로 제작한 juctionless thin-film transistor를 제작하여 기존의 열처리를 이용하여 처리한 소자와 microwave를 이용해서 열처리한 소자의 전기적 특성을 한 달 동안 관찰 하였다. 또한 In:Zn의 비율을 고정한 후 Ga의 비율을 달리하여 특성을 비교하였다. 먼저 p-type bulk silicon 위에 SiO2 산화막이 100 nm 증착된 기판에 RCA 클리닝을 진행 하였고, solution InGaZnO 용액을 spin coating 방식으로 증착하였다. Coating 후에, solvent와 수분을 제거하기 위해서 $180^{\circ}C$에서 10분 동안 baking공정을 하였다. 이후 furnace열처리와 microwave열처리를 비교하기 위해 post-deposition-annealing (PDA)으로 furnace N2 분위기에서 $600^{\circ}C$에서 30분, microwave를 1800 W로 2분 동안 각각의 샘플에 진행하였다. 또한, HP 4156B semiconductor parameter analyzer를 이용하여 제작된 TFT의 transfer curve를 측정하였다. 그 결과, microwave 열처리한 소자의 경우 기존의 furnace 열처리 소자와 비교하여 높은 mobility, 낮은 hysteresis 값을 나타내었으며, 1달간 소자의 특성을 관찰하였을 때 microwave 열처리한 소자의 경우 전기적 특성이 거의 변하지 않는 것을 확인하였다. 따라서 향후 용액공정, 저온공정을 요구하는 소자 공정에 있어 열처리방법으로 microwave를 이용한 활용이 기대된다.

• Applied Microscopy
• /
• v.26 no.4
• /
• pp.401-410
• /
• 1996

The microwave fixator has recently been introduced in morphological research. The present study was carried out to investigate the ultrastructural effects of microwave fixation of rat brain. kidney, liver and skeletal muscle tissues. The results are as follows: In the case of microwave fixed cerebrum. the cytoplasmic processes of neurons and the various membranous organelles such as nuclear envelope, mitochondria, rough endoplasmic reticulum and Golgi apparatus were well preserved, The myelin sheath wrapping neuronal axon was prominent. Microwave fixed hepatocytes showed the microvilli on the free surface of bile canaliculus, the evident nucleolar components, and typical organelles. In nephron, ultrastructures of glomerulus and Bowman's capsule were preserved, and also tubular wall were structurally observed. Among the skeletal muscle cells, plentiful collagen fibers were appeared, myofibrils and mitochondria were typically observed. In conclusion, the microwave fixation procedures result in an good preservation of the tissues and would be time- and reagent-saving.