• 한국조경학회지
• /
• 제35권2호통권121호
• /
• pp.37-48
• /
• 2007

An exhibit entitled 'Revelatory Landscapes' was held at the San Francisco Museum of Modem Art from May 5 to October 14, 2001. For this Museum's rot off-site outdoor exhibition, five outstanding design teams-Kathryn Gustafson, Hargreaves Associates, Hood Design, Tom Leader Studio, and ADOBE LA-created site-specific installations in Berkeley, Oakland, San Jose, and the San Francisco Bay Area. Each project showcased a hybridization of environmental art and landscape design. The main content revealed through revelatory landscapes were the natural, cultural, and historical palimpsest of the sites-particularly as related to the history of minorities such as Native American, African Americans and Latin Americans-as well as the every day life of ordinary people. To represent these ideas, a juxtaposition of the past and the present was broadly applied. Furthermore, the use of dramatic colors, textures, and forms in consideration of materials coupled with the revelation of natural elements such as wind and sunlight accelerated the effect of this juxtaposition. Every project of the Revelatory Landscapes exhibit requires a phenomenological experience to be appreciated. Via the five senses, these experiences cause a synesthetic experience beyond solely the visual. By examining the projects of 'Revelatory landscapes', the threshold for a new blending between environmental art and landscape design as well as new landscape design strategies that overcome the dichotomy between nature and culture will change and evolve.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1995년도 추계 학술대회논문집
• /
• pp.160-168
• /
• 1995

This paper describes computational efforts on the various energy and environmental problems using Patankar's SIMPLE method. The specific problems included in this study are : pollutant and flammable material dispersions in open and confined areas, aerator-induced flow in a lake for DO(dissolved oxygen) concentration, primary clarifier for water and waste water treatment, hood ventilation in workplace, cyclone and LNG combustors and Dow chlorination reactor. A control-volume based finite-difference method is employed together with the power-law scheme. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, says SIMPLER and SIMPLEC. The Reynolds stresses are closed using the standard or the RNG $k-{\varepsilon}$ models. Turbulent reaction is modeled using two fast chemistry methods such as eddy breakup and conserved scalar models. Further, a nonequilibrium model is developed for the application of the chlorination process in the Dow reactor. Other important empirical models and physical insights appeared in this study are presented and discussed in a brief note. The computational method developed in this study is considered, in general, as a viable tool for the design and determination of the optimal condition of various engineering system of interest.

• 한국산업보건학회지
• /
• 제8권2호
• /
• pp.178-185
• /
• 1998

In order to evaluate and improve the performance of local exhaust ventilation systems for two TCE degreasing (A, B) and two electroplating (C, E) and one acid dipping & plating (D) operations located in Kimhae, the performance test was conducted with trace gases and a thermal anemometer (Kanomax 24-6111, Japan). For the inadequately designed systems, the improvement and redesigns in compliance with recommendation by ACGIH was suggested. The results of performance test for each system are as follows; 1. System of Workplace A was generally well-designed. Actual exhaust air flow rate was in excess of 68% above the recommended standard exhaust air flow rate. 2. System of Workplace B was very well-designed and completely enclosed. 3. All systems of Workplace C including hoods were poorly-designed and actual exhaust air flow rates were insufficient for open tanks. All systems should be upgraded according to ACGIH recommendations. 4. Supply and exhaust air flow rate of push-pull exhaust systems in Workplace D should be greatly increased. The width of flange of dipping tank hood should be increased with the value suggested. 5. System of Workplace E was well-designed. Actual exhaust air flow rate was in excess of 54% above the required.

• 복식문화연구
• /
• 제12권3호
• /
• pp.339-353
• /
• 2004

Purposes of this study were to analyzed coat types and characteristics of coat of young persons, and search whether fashion trend is reflected on coat. Data collected pictures that they are wearing dress in street of Daejeon city 3 places that there are much the rising generations at November, 1999. This study target was from teens latter half to 20 opening part, 154 women. Data analyzed content analysis, frequency analysis, crossing and the result is as following. First, classification standard of coat was textile fabric, form of detail and ornament. Second, coat could classify in three types, type 1 was traditional duffle coat style that is distinguished by form of detail and ornament(hood and button). Type 2 was classified property of textile fabric that used leather, padding, fur etc., and type 3 was classified by collar detail of woolen fabric coat. Specially, ornamental fur of woolen coat perceived visually strong. And design detail of coat showed significant difference in coat type. That is, duffle coat type was designed patch pocket and toggle, woolen fabric coat type was hidden button and seam pocket. Third, fashion tendency of coat was proved that is reflecting part of predicted fashion trend.

• 동아시아식생활학회지
• /
• 제15권5
• /
• pp.606-612
• /
• 2005

This study was performed to provide basic data that predict the application of Saengmaegsan(SMS) as medicinal food. SMS has been used in oriental medicine for many years as a therapeutic agent for cerebral disease. We examined the effects of SMS on physiological function in isolated abdominal aorta and femoral artery from rabbit and measured the changes of regional cerebral hood flow(rCBF), which was continually monitored by laser-doppler flowmeter and pressure transducer in anesthetized adult Spargue-Dawley rats through the data acquisition system composed of MacLab and Macintosh computer. The contraction forces by injection of norephinephrine in isolated abdominal aorta and femoral artery were significantly decreased in each concentration of SMS treatment compared with control. rCBF was increased by SMS in a dose-dependent manner. These results suggest that SMS causes a diverse response of rCBF and arterial diameter. These mechanism in rCBF increase may be mediated by prostaglandis, cyclic GMP and adrenergic $\beta-receptor$. Also mechanism in artery contraction decrease is also mediated by prostaglandis and cyclic GMP. These results indicate that SMS can be nsed as a safe and clinically applicable as a supplementation of diet therapy for cerebral cardiovascular disease patients.

• 대한기관식도과학회지
• /
• 제1권1호
• /
• pp.122-128
• /
• 1995

The experience with treatment of acquired subglottic stenosis in 20 adults is reviewed. Nine of the 20 patients (45%) had opeated by other institues before treatment. Causes of the disease were 10(50%) of blunt neck trauama and 10(50%) of prolonged intubation. The most common associated airway diseases were nine patients (45%) of bilateral vocal cord fixations. Twelve patients (60%) underwent anterior cartilage grafts, five patients (25%) had anterior and posterior cartilage grafts and three patients (15%) had end to end anastomosis according to the severity of cricoid deformities and mucosal defects. Associated procedures were 9 patients (45%) of arytenoidectomy. Thirteen of 20 patients (65%) have been decannulated. Fe-male group was significantly higher decannulation rate than male group (p=0.0074). Decannulation rates were decreased from anterior cartilage graft group to anterior and posterior cartilage grafts group and to end to end anastomosis group (p= 0.00247), this finding suggested the patients with severe cricoid deformitiy were higher likely hood of failure because we selected the method used in this study according to the severity of cricoid deformities and mucosal defects. Our results support the more aggressive treatment is indicated for subglottic stenosis in adults.

• Structural Engineering and Mechanics
• /
• 제62권2호
• /
• pp.163-170
• /
• 2017

This study presents a particle-wall filtration model for predicting the particle motion behavior in a typical rotational flow field-filtration in blower system of cooker hood. Based on computational fluid dynamics model, air flow and particles has been simulated by Lagrangian-particle/ Eulerian-gas approaches and get verified by experiment data from a manufacturer. Airflow volume, particle diameter and local structure, which are related to the particle filtration has been studied. Results indicates that: (1) there exists an optimal airflow volume of $1243m^3/h$ related to the most appropriate filtration rate; (2) Diameter of particle is the significant property related to the filtration rate. Big size particles can represent the filtration performance of blower; (3) More than 86% grease particles are caught by impeller blades firstly, and then splashed onto the corresponding location of worm box internal wall. These results would help to study the micro-particle motion behavior and evaluate the filtration rate and structure design of blower.

• International journal of advanced smart convergence
• /
• 제9권4호
• /
• pp.132-138
• /
• 2020

Worldwide, the number of corona virus disease 2019 (COVID-19) confirmed cases is rapidly increasing. Although vaccines and treatments for COVID-19 are being developed, the disease is unlikely to disappear completely. By attaching a smart sensor to the respirator worn by medical staff, Internet of Things (IoT) technology and artificial intelligence (AI) technology can be used to automatically detect the medical staff's infection symptoms. In the case of medical staff showing symptoms of the disease, appropriate medical treatment can be provided to protect the staff from the greater risk. In this study, we design and develop a system that detects cough, a typical symptom of respiratory infectious diseases, by applying IoT technology and artificial technology to respiratory protection. Because the cough sound is distorted within the respirator, it is difficult to guarantee accuracy in the AI model learned from the general cough sound. Therefore, coughing and non-coughing sounds were recorded using a sensor attached to a respirator, and AI models were trained and performance evaluated with this data. Mel-spectrogram conversion method was used to efficiently classify sound data, and the developed cough recognition system had a sensitivity of 95.12% and a specificity of 100%, and an overall accuracy of 97.94%.

• 복식문화연구
• /
• 제30권6호
• /
• pp.814-827
• /
• 2022

This study examines the social and artistic aspects of the Netherlands in the 16th century, focusing on the paintings of Pieter Bruegel the Elder (1525-1569), a repre- sentative Dutch painter at that time. Also analyzed were the types and characteristics of each item of the male populace's and nobles' costumes at that point in the Renaissance. The results are as follows: most of the populace's chemises do not have frills on the neckline and sleeves; the doublet has a loose body and sleeves overall; and the sleeves and armholes are fixed with sewing rather than being detachable, making the epaulet invisible. The neckline of the doublet usually does not have a collar, but it sometimes has a hood. In the case of trousers, most males are shown wearing waist-high stockings, and a piece of cord is visible. It seems that the populace's coats were mainly Spanish-style capes. The 16th-century Dutch populace's costumes are imitative-reflecting a desire to emulate the codpieces and hairstyles of the aristocrats-while providing individuality through hats and belts. In terms of practicality, it appears that a knife and pouch were used in various living environments. This trend can be seen as a reflection of populace's perception of the costume at the time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1312-1316
• /
• 2007

Strip casted and rolled magnesium sheet is become exiting material for car manufacturer, due to its better formability and specific strength compare with conventional extruded sheet. TWB technology was attractive for car body designer, because it saves the weight of the car without strength loss. In this study, the laser welding performance of magnesium sheet was investigated for Mg TWB panel manufacturing. The material was strip casted and rolled magnesium alloy sheet contains 3 wt% Al and 1 wt% Zn (AZ31). Lamp pumped Nd:YAG laser of 2kW was used and its laser light was delivered by optical fiber of 0.6mm core diameter to material surface with focusing optics of 200mm focal length for TWB welding. The microstructure of weld bead was investigated to check internal defects such as inclusion, porosity and cracks. Also mechanical properties and formability were evaluated for press forming of car body. For the results, there was no crack but inclusion or porosity on weld at some conditions.The tensile strength of weld was over 95% of base metal. Inner and outer panel of engine hood were press formed and assembled at elevated temperature.