• Journal of Biomedical Engineering Research
• /
• v.28 no.1
• /
• pp.75-83
• /
• 2007

Elasticity is an important physical property of biological tissues. Differences in elasticity can help facilitate the diagnosis of tumors and their extent. Magnetic Resonance Elastography (MRE) tries to visualize images of tissue elasticity by externally applying shear stress on the surface of an imaging object. Applied shear stress induces internal displacements that can be measured from MR phase images. In order to conduct MRE imaging experiments, we need to first develop a vibrator. We found that there does not exist enough technical information to design the MRE vibrator. In this paper, we describe the theory, design and construction of an MRE vibrator. We report the performance of the developed vibrator using two different test methods. We found that the vibrator successfully induces enough internal displacements that can be imaged using an MRI scanner. We suggest future studies of numerous MRE imaging experiments using the vibrator.

• Computers and Concrete
• /
• v.17 no.1
• /
• pp.129-140
• /
• 2016

Basalt is a type of volcanic rocks, grey to black in colour, contains less than 20% quartz, 10% feldspathoid, and at least 65% of the feldspar of its volume. Basalt is considered an igneous rock with fine grains due to the rapid cooling of lava. Basaltic rocks have been widely used as aggregate for various purposes. The study presented in this paper was carried out on basalts that are widespread in the Madeira Island of Portugal and that comprise the major source of local crushed rock aggregates. This paper discusses an experimental programme that was carried out to study the effects of basaltic aggregate on the compressive strength and modulus of elasticity of concrete. For this purpose, cylinder specimens with $150{\times}300mm$ dimensions and prism specimens with $150{\times}150{\times}375mm$ dimensions were cast. The experimental programme was carried out with several concrete compositions belonging to strength classes C20/25, C25/30, C30/37, C40/50 and C60/75. The Eurocode 2 indicates the modulus of elasticity should be 20% higher when the aggregates are of basaltic origin, however results showed significant differences and a correction is proposed.

• Interaction and multiscale mechanics
• /
• v.4 no.2
• /
• pp.85-105
• /
• 2011

The influence of surface elasticity and surface residual stress on the elastic field of an isotropic nanoscale elastic layer of finite thickness bonded to a rigid material base is considered by employing the Gurtin-Murdoch continuum theory of elastic material surfaces. The fundamental solutions corresponding to buried vertical and horizontal line loads are obtained by using Fourier integral transform techniques. Selected numerical results are presented for the cases of a finite elastic layer and a semi-infinite elastic medium to portray the influence of surface elasticity and residual surface stress on the bulk stress field. It is found that the bulk stress field depends significantly on both surface elastic constants and residual surface stress. The consideration of out-of-plane terms of the surface stress yields significantly different solutions compared to previous studies. The solutions presented in this study can be used to examine a variety of practical problems involving nanoscale/soft material systems and to develop boundary integral equations methods for such systems.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.7
• /
• pp.1139-1152
• /
• 1997

Clothing consumption expenditure (UX) data of Korean consumers during the period of 1965 to 1993 were analyzed by time series analysis technique. According to the results of regression analysis, current income and UX of the year before showed most significant influences on the current UX. This means that the absolute and permanent income hypotheses can be accepted in case of clothing expenditures. However the effect of income decreased as the economy developed. The relative price of clothing had weak or no influence on clothing expenditures. It was also found out that CSX of the year before, the change of income, relative price of clothing ware the factors that affected clothing expenditures. From the estimation of Houthakker-Taylor state adjustment model, a negative stock coefficient was obtained. That is, clothing is subject to an inventor effect and Korean consumers regard clothing as one of the durable goods. To define whether clothing is a "luxury" or a "necessity", income and relative price elasticity of clothing expenditures were estimated. Income elasticity of clothing is slightly below 1.0 in case of national aggregate expenditures, and slightly above 1.0 in case of urban consumers' expenditures. Income elasticity has declined over time. Meanwhile the coefficient of price elasticity is not significant, indicating that the relative price of clothing have little connection with clothing expenditure.lothing expenditure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.190-194
• /
• 1993

This paper focuses on the development of the tangent modulus to describe the nonlinearity of concrete based on the continuum damage mechanics. This tangent modulus includes the effects of elasticity, damage and plasticity of concrete.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.1-8
• /
• 2016

Non-destructive ultrasonic testing was applied to evaluate the performance of wood deck material with hole as artificial defect. Ultrasonic velocities and modulus of elasticity were measured according to different diameters and numbers of holes, and comparative analysis to each data were done. From the results, ultrasonic velocities and modulus of elasticity decreased with an increase in the hole size and showed a negative linear correlation with the size of hole, respectively. As the hole size increased, ultrasonic velocities decreased, but their difference was small in the case of the hole size under 15 mm. Also, ultrasonic velocities and modulus of elasticity decreased with increasing the number of holes and showed a strong negative linear correlation to the number of holes. As the number of holes increased, ultrasonic velocities decreased to 3.5%, but modulus of elasticity decreased to 27%. Therefore, the number of holes showed greater influence to modulus of elasticity than ultrasonic velocity. Overall, the size and number of holes influenced to ultrasonic velocity and modulus of elasticity, and their influence will be greater as the size and number of holes increases. These results suggested that several ultrasonic parameters rather than a single ultrasonic velocity should be applied to detect small defects in wood decking materials.

• Advances in nano research
• /
• v.11 no.6
• /
• pp.607-620
• /
• 2021

In this paper, the vibrations of boron nitride nanotubes (BNNTs) are investigated by considering the electric field. To consider the size effect at nanoscale dimensions, the surface elasticity theory is exploited. The equations of motion of the BNNTs are obtained by applying Hamilton's principle, and the clamped-guided boundary conditions are also considered. The governing equations and boundary conditions are discretized using the differential quadrature method (DQM), and the natural frequency is obtained by using the eigenvalue problem solution. The results are compared with the molecular dynamic simulation in order to validate the accurate values of the surface effects. In the molecular dynamics (MD) simulation, the potential between boron and nitride atoms is considered as the Tersoff type. The Timoshenko beam model is adopted to model BNNT. The vibrations of two types of zigzag and armchair BNNTs are considered. In the result section, the effects of chirality, surface elasticity modulus, surface residual tension, surface density, electric field, length, and thickness of BNNT on natural frequency are investigated. According to the results, it should be noted that, as an efficient non-classical continuum mechanic approach, the surface elasticity theory can be used in scrutinizing the dynamic behavior of BNNTs.

• Journal of the Korean Home Economics Association
• /
• v.32 no.2
• /
• pp.1-16
• /
• 1994

This paper analysis the structure of Housing Consumption Expenditure of urban salary and wage-earners' households from 1982 to 1992 by employing Time-series. Data was based on " Annual report on the Family Income and Expenditure Survey" of the National Bureau of Statistic Planning Board, Republic of Korea. Percentile marginal-propensity to consume(MPC) and income elasticity of consumption expenditure are estimated by their socio-economic and demographic variables. The results are as follows: 1. The proportion of the expenditure for furniture and utensils and house mending has increased with the increase of income in urban salary and wage-earners' households, while fuel light and water charges and rents paid has decreased. 2.1) Engel Function by income group; MPC associated with rents paid and fuel light and water charges is higher in the lower income group than in the rest. The income elasticity estimates in rents paid and fuel light and water charges is less than 1 in all group while larger than 1 in furniture and utensils and house mending. 2) Engel Function by occupation of household head; The highest MPC in rents paid is associated with the sales profession. The income elasticity of fuel light and water charge is found be inelastic. The groups other than the sales group show irregular MPC. 3) Engel Function by family size; MPC in house mending and fuel light and water charge is increased while is decreased in rents paid in accordance with family size. The income elasticity of rents paid and fuel light and water charge is less than 1 in all groups while that of house mending and furniture and utensils is larger than 1. 4) Engel Function by age of housegold head; MPC in rents paid is decreased according to the age of housefold head. The income elasticity of rents paid and fuel light and water charge is less than 1 in all group while it is larger than 1.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2747-2754
• /
• 2010

Cupping therapy has been used to extensive diseases. However, the research was yet to meridian and acupoint's change of state caused by Cupping. This study was considered a human-ripple effect by the anlaysis of meridian & acupoint's change of state. We developed the system which is keeps 30kPa Negative-pressure and stimulated on the Left Lung Meridian(LU) a halfway point between LU4 and LU5. We checked moisture and elasticity change on left/right acupoints & non-acupoints, then measured EMG Signal. We observed that moisture had little change(12.49%) and the better part of the elasticity on both sides had identified the change(64.42%). The number of the provoked acupoiunt elasticity change was more than non-acupoint. Also, elasticity change of Right side was more than Left side. We confirmed that RMS and Median Power change patterns were lower in proportional to the elastin change, but there was no significance about Median Frequency. Therefore inducing the change of elasticity and EMG signal on meridian-acupoints. Therefore, We checked the human-ripple effect Negative-pressure by the Cupping therapy.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.202-208
• /
• 2014

For evaluating basic structural behavior of HVFA (High Volume Fly Ash) concrete, several tests are performed considering different ratios of fly ash replacement and structural evaluation regarding compressive strength, elasticity modulus, stress-strain relationship, and bond strength is also performed. Test results show that elasticity modulus of HVFA concrete has close relationships with compressive strength and fly ash replacement ratio. The ultimate strain shows slight difference from domestic design code. On the other hand, there are no differences between general concrete and HVFA concrete for elasticity modulus and bond strength.