• 대한인간공학회지
• /
• 제28권1호
• /
• pp.21-27
• /
• 2009

The purpose of this research is to understand the physiological characteristics of muscular men between the ages of 20 and 34 years who are distinct from the general population due to their muscular development, and to categorize them according to upper body somatotypes. This research was conducted in order to provide basic data necessary for developing clothing products for muscular men. The research method and results were as follows: 1. The study carried out factor analysis with the body measuring value of 168 muscular men according to the body classification method of Sheldon and Heath-Carter. The study materialized muscular men's lower body types statistically by carrying out cluster analysis, regarding scores of each factor extracted from the factor analysis as an independent variable. The study also carried out discriminant analysis with the results of cluster analysis classified so that morphological characters of each type were remarkably distinguished. 2. As the results of factor analysis, the study set up number of factors as three. Factor 1 occupied 38.149% of the total variables as a size factor of the lower body. Factor 2 occupied 20.417% of the total variables as a height and length factor of the lower body. Factor 3 occupied 8.466% of the total variables as a length factor of the hip. 3. The study classified the lower body type into three types and the characteristics by each type were as follows. Type 1 was a group with the best developed muscle in the lower of the body, considering that a size of their lower bodies was the largest. Type 2 was well-balanced muscular males though a size of the lower body was smaller than other types. This type didn't have fatness of the abdomen and large hips. Type 3 was a body type that the length from the waist to the hip was long. 4. As the results of carrying out discriminant analysis to distinguish muscular men's lower body types, the discriminant accuracy was 86.3% over all in the lower bodies.

• 소음진동
• /
• 제6권2호
• /
• pp.197-203
• /
• 1996

This study is to analyze the rotordynamic effect of surface-friction- factor characteristics on an annular seal. The honeycomb geometry which shows friction-factor-jump phenomena is used in this study. A rotordynamic analysis for a contered annular seal has been developed by incorporating empirical friction-factor model for honeycomb stator surfaces. The results of the analysis for the honeycomb seal showing the friction-factor jump is compared to the non- friction-factor-jump case. The results yield that the friction-factor-jump decreasesdirect stiffness and cross coupled stiffness coefficients, and increases damping coefficient to stabilize rotating machinery in a rotordynamic point of view. The analysis of the honeyeomb seal for the friction-factor-jump case shows reasonably good compared to experimental results, especially, for cross coupled and damping coeffcients.

• 패션비즈니스
• /
• 제20권3호
• /
• pp.54-67
• /
• 2016

The purpose of this study was to investigate the The effect of fashion consumer's need for uniqueness in their clothing purchase behavior and switching intention. A total of 332 cases were included as the subjects of this study and a survey method was used. The data were analyzed by factor analysis, reliability analysis, t-test and multiple regression analysis using the SPSS 22.0 statistical program. The results were as follows. 1. The 3 dimensions (creative choice, unpopular choice, and avoidance of similarity) were extracted from the consumer's need for uniqueness and consumer divided high uniqueness group, middle uniqueness group, low uniqueness group. 2. The 3 factor (esthetic, functional, practical) were extracted from the clothing selection criteria. The three group had a significant difference in clothing selection and switching intention. Aesthetic factor and practical factor were the highest in high uniqueness group. 3. The need for uniqueness has influence on the aesthetic factor and practical factor. The creative choice factor had positive effect on the aesthetic and practical factor, yet unpopular choice factor had negative effect on the practical factor. The need for uniqueness and aesthetic factor has positive influence on brand switching intentions. 4. There was difference in unpopular choices factor by gender. A monthly average expenditure on fashion products had a significant difference in three kind of need for uniqueness. Results of this study provide a basis understand need for uniqueness and their effect on consumer behavior.

• 부모자녀건강학회지
• /
• 제17권1호
• /
• pp.37-45
• /
• 2014

Purpose: This study aimed to review measurements of environmental health behavior and assess the construct validity of Environmental Health Engagement Profile (EHEP) through confirmatory factor analysis. Methods: The literature review was performed for selection of measurements. Confirmatory factor analysis with AMOS 19.0 was used for validation of EHEP. Results: The model fitness was not appropriate in the one-factor model; $x^2=91.11$ (df=5, p<.001), Comparative Fit Index (CFI)=8.19, Non Normed Fit Index (NNFI)=6.39, and Root Mean Square Error of Approximation (RMSEA)=0.20. The model fitness was appropriate in the two-factor model; $x^2=3.19$ (df=1, p=.074), CFI=9.95, NNFI= 9.71, RMSEA=0.07. A modification of scale was found to be the most suitable for use in the investigation of environmental health behavior. Conclusion: This study confirms that a two-factor model underlies the concept of environmental health behavior. The review of measurements can help nurses and researchers to assess the environmental health behaviors.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1079-1091
• /
• 2005

The purpose of this study was to point out the unification of the size of swimming headgear by measuring detailed measurement of head ferm and systematizes the head form. A total of 300 male and female Korean adults aged from 18 years old to 35 years old were measured through the direct measurement method. This study attempted to identify the head form of male and female adults using measurement data and the head form was classified through factor analysis and cluster analysis. (1) Based on the fact that this study especially focuses on the size of swimming headgear, factor analysis was performed far both direct measurements with hair and without hair. For the measurements with hair, seven factors were extracted. They were head thickness factor, head width factor, width of side head factor, height of back head factor, length of front head factor, circumference of front head factor, thickness of front head factor and head height factor. They explained the $70.95\%$ of the measurements. (2) The cluster analysis was executed to classify the somatotype of the korean head form on the basis of similarity. According to the cluster analysis result, the measurements with hair categorized types, 'Woman's long-hair type', 'Small type', 'Long and flat type', 'Large type'. (3) Head circumference B and Left tragion - Vertex - Right tragion circumference which are generally length and width in choosing swimming headgear size were selected as measurement items far size of swimming headgear. Direct measurements and sizes of four swimming headgear with different materials taking into account their elongation rate were also compared.

• 한국환경과학회지
• /
• 제14권2호
• /
• pp.251-258
• /
• 2005

Statistical analysis between operating parameters and effluent quality on advanced wastewater treatment plant was performed. Through factor analysis four factors derived varimax rotation were selected each plant. Four components explained $80\%,\;82\%$ of the total variance of the process, respectively. The components on MLE plant were identified in the following order: 1) HRT increase and BOD load decrease by influent decrease, 2) Biomass, 3) SVI increase by internal return increase, 4) Microbial diversity by SRT increase. On $A_2O$ plant, we defined them as follows: factor 1, high MLSS by return rate increase, HRT increase by influent decrease; factor 2, biomass; factor 3, BOD of influent; factor 4 was relate to DO.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권5호
• /
• pp.463-469
• /
• 1998

Factor analysis was applied as a multivariate statistical technique to official genetic evaluations of type classification traits for 1,265,785 Holstein cows and 10,321 sires computed from data collected between August 1982 and June 1994 in Canada. Type traits included eighteen linear descriptive traits and eight major score card traits. Principal components of the factor analysis showed that only five factors explain the information of the genetic value of linear descriptive traits for both cows and sires. Factor 1 included traits related to mammary system, like texture, median suspensory, fore attachment, fore teat placement and rear attachment height and width. Factor 2 described stature, size, chest width and pin width. These two factors had a similar pattern for both cows and sires. In constrast, Factor 3 for cows involved only bone-quality, while in addition for sires, Factor 3 included foot angle, rear legs desirability and legs set. Factor 4 for cows related to foot angle, set of rear leg and leg desirability, while Factor 4 related to loin strenth and pin setting for sires. Finally, Factor 5 included loin strength and pin setting for cows and described only pin setting for sires. Two factors only were required to describe score card traits of cows and sires. Factor 1 related to final score, feet and legs, udder traits, mammary system and dairy character, while frame/capacity and rump were described by Factor 2. Communality estimates which determine the proportion of variance of a type trait that is shared with other type traits via the common factor variant were high, the highest ${\geq}$ 80% for final score, stature, size and chest width. Pin width and pin desirability had the lowest communality, 56% and 37%. Results indicated shifts in emphasis over the twelve-year period away from udder traits and dairy character, and towards size, scale and width traits. A new system that computes fmal score from type components has been initiated.

• Earthquakes and Structures
• /
• 제16권6호
• /
• pp.655-664
• /
• 2019

Behavior factor of a structure plays a crucial role in designing and predicting the inelastic responses of it. Recently, irregular buildings have been interested in many designers. To design irregular structures, recognizing the inelastic behavior of them is necessary. The main objective of this study is to determine the behavior factor of irregular Reinforced Concrete Moment Resisting Frames (RCMRFs) via nonlinear Incremental Dynamic Analysis (IDA). To do so, first, several frames are designed according to the regulations of the Iranian national building code. Then the nonlinear incremental dynamic analysis is performed on these structures and the behavior factors are achieved. The acquired results are compared with those obtained using pushover analysis and it is shown that the behavior factors acquired from the nonlinear incremental dynamic analysis are somewhat larger than those obtained from pushover analysis. Eventually, two practical relations are proposed to predict the behavior factor of irregular RCMRFs. Since these relations are based on the simple characteristics of frames such as: irregularity indices, the height and fundamental period, the behavior factor of irregular RCMRFs can be achieved efficiently using these relations. The proposed relations are applied to design of four new irregular RCMRFs and the outcomes confirm the accuracy of the aforementioned relations.

• 복식문화연구
• /
• 제23권6호
• /
• pp.940-954
• /
• 2015

The purpose of this study is to identify the antecedents of repurchase intention toward fast fashion brands. Perceived quality, perceived price, deindividuation, and overly trendy styles, which are product characteristic variables, and fashion innovativeness, which is a consumer characteristic variable, were considered as antecedents. It was hypothesized that product and consumer characteristics influence repurchase intention toward fast fashion brands not only directly, but also indirectly through cognitive dissonance. Data were gathered by surveying university students in Seoul using convenience sampling. Three hundred and fifty-two questionnaires were used in the statistical analysis. SPSS was used for exploratory factor analysis, and AMOS was used for confirmatory factor analysis and path analysis. The factor analysis of product characteristics revealed four dimensions: "perceived quality", "perceived price", "deindividuation", and "overly trendy styles", and the factor analysis of consumer characteristics revealed one dimension. The factor analysis of cognitive dissonance revealed two dimensions, "regrets" and "perceived uncertainty." The hypothesized path test proved that perceived quality, deindividuation, overly trendy styles, and fashion innovativeness influence repurchase intention directly. Perceived price and deindividuation influence repurchase intention indirectly through the factor of cognitive dissonance, which is the perceived uncertainty, indicating the importance of cognitive dissonance. The results indicate effective marketing strategies should be used to decrease consumers' cognitive dissonance, and suggestions for future study are provided.

• 한국환경보건학회지
• /
• 제48권4호
• /
• pp.236-243
• /
• 2022

Background: In the case of multiple exposures to different types of heavy metals, such as the conditions faced by residents living near a smelter, it would be preferable to group hazardous substances with similar characteristics rather than individually related substances and evaluate the effects of each group on the human body. Objectives: The purpose of this study is to evaluate the utility of factor analysis in the assessment of health effects caused by exposure to two or more hazardous substances with similar characteristics, such as in the case of residents living near a smelter. Methods: Heavy metal concentration data for 572 people living in the vicinity of the Janghang smelter area were grouped based on several subfactors according to their characteristics using factor analysis. Using these factor scores as an independent variable, multiple regression analysis was performed on health effect markers. Results: Through factor analysis, three subfactors were extracted. Factor 1 contained copper and zinc in serum and revealed a common characteristic of the enzyme co-factor in the human body. Factor 2 involved urinary cadmium and arsenic, which are harmful metals related to kidney damage. Factor 3 encompassed blood mercury and lead, which are classified as related to cardiovascular disease. As a result of multiple linear regression analysis, it was found that using the factor index derived through factor analysis as an independent variable is more advantageous in assessing the relevance to health effects than when analyzing the two heavy metals by including them in a single regression model. Conclusions: The results of this study suggest that regression analysis linked with factor analysis is a good alternative in that it can simultaneously identify the effects of heavy metals with similar properties while overcoming multicollinearity that may occur in environmental epidemiologic studies on exposure to various types of heavy metals.