• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.3
• /
• pp.412-417
• /
• 2007

An experiment was conducted to determine the distribution of nitrogen-15 in tissues of laying hens receiving different levels of $^{15}N$-CCC in diets. Twenty brown laying hens were divided into four groups and randomly assigned into one of four dietary treatment groups consisting of 0, 5, 50 and 100 ppm $^{15}N$-CCC inclusion. The hens were individually fed with the $^{15}N$-CCC diets in battery cages for 11 days and then all hens restored to feeding on the control diet for 7 days. After eleven days, eight hens were slaughtered, and the others were slaughtered seven days after $^{15}N$-CCC diets withdrawal. Samples of blood, liver, heart and meat were collected and their $^{15}N$ contents were determined. The ${\delta}^{15}N$ excess (${\delta}^{15}N$-ex) and atom percentage excess in $^{15}N$ were calculated. The ${\delta}^{15}N$-ex and atom percentage excess $^{15}N$ increased significantly (p<0.05) with increasing levels of $^{15}N$-CCC in diets in all tissues after feeding $^{15}N$-CCC diets for eleven days. The highest concentration of ${\delta}^{15}N$-ex and atom percentage excess $^{15}N$ were detected in blood, followed in order by liver, heart and thigh meat. The concentrations reduced significantly (p<0.05) after $^{15}N$-CCC diets were withdrawn. Comparison between treatment groups showed that ${\delta}^{15}N$-ex and atom percentage excess $^{15}N$ were still higher in hens that had been fed diets with higher levels of $^{15}N$-CCC. This study showed that nitrogen-15 was distributed in blood, liver, heart and meat of laying hens.

• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.51-62
• /
• 2012

The exponential growth in wireless services has resulted in an overly crowded spectrum. The current state of spectrum allocation indicates that most usable frequencies have already been occupied. This makes one pessimistic about the feasibility of integrating emerging wireless services such as large-scale sensor networks into the existing communication infrastructure. Cognitive radio is an emerging dynamic spectrum access technology that can be used for flexibly and efficiently achieving open spectrum sharing. Cognitive radio is an intelligent wireless communication system that is aware of its radio environment and that is capable of adapting its operation to statistical variations of the radio frequency. In ad hoc cognitive radio networks, a common control channel (CCC) is usually used for supporting transmission coordination and spectrum-related information exchange. Determining a CCC in distributed networks is a challenging research issue because the spectrum availability at each ad hoc node is quite different and dynamic due to the interference between and coexistence of primary users. In this paper, we propose a novel CCC selection protocol that is implemented in a distributed way according to the appearance patterns of primary systems and connectivity among nodes. The proposed protocol minimizes the possibility of CCC disruption by primary user activities and maximizes node connectivity when the control channel is set up. It also facilitates adaptive recovery of the control channel when the primary user is detected on that channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7C
• /
• pp.640-648
• /
• 2009

Summation generator with high period and high linear complexity can be easily implemented by a simple hardware or software and it is proper to apply in mobile security system for ubiquitous environments. However the generator has been some weaknesses from Dawson's divided-and-conquer attack, Golic's correlation attack and Meier's fast correlation attack. In this paper, we propose an improved version($2^{128}$security level) of $E_0$algorithm, CVC-NSG(Circular-Clock-Controlled - Nonlinear Summation Generator), which partially replaces LFSRs with nonlinear FSRs and controls the irregular clock to reinforce it's own weaknesses. Finally, we analyze our proposed design in terms of security and performance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.509-516
• /
• 2019

It is well known that nitroglycerin(NG) may evaporate and migrate from the triple base propellant grains in storage. This physical process makes it double base environment to the CCC(combustible cartridge case) which is based on nitrocellulose(NC) without NG. Meanwhile, it is not appropriate to use diphenylamine(DPA) as a stabilizer for CCC in this double base environment because of incompatibility between DPA and NG. So we estimated the shelf life to study the effect of NG migration from propellant to CCC by following the procedures in the STANAG 4257. And we found out that CCC with ethylcentralite(ECL) has 7.5 years longer shelf life than with DPA, when NG migrates to CCC from triple base propellant grains.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.271-272
• /
• 2006

Zinc confers high corrosion resistance by acting as a sacrificial anode, and a zinc coating improves the appearance of steel. Chromate conversion coating (CCC) films are still one of the most efficient surface treatments for steel. Although such films can self-repair via the dissolution of Cr(VI), dissolved Cr(VI) have adverse effects on humans, and the environment. Therefore, we examined the corrosion protection property and morphology of colloidal silica conversion films as an alternative to CCC films. The corrosion behavior was investigated in 3% NaCl solution using electrochemical techniques, including electrochemical impedance spectroscopy, open circuit potential, and the salt spray test(SST). Corrosion was implied by the appearance of red rust on the specimen surface. In corrosion resistance at 3% NaCl solution, red rust appeared at 15-20, 55-70, and 83-98 days on Zn-electroplated steel, colloidal silica conversion-coated specimens, and CCC-coated specimens, respectively. In the salt spray test, the colloidal silica film provided better corrosion protection than CCC films, i.e., red rust appeared at 96 hours on the Zn-electroplated steel sheet, at 432 hours with the CCC films, and at 888 hours with silica conversion coating.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.523-528
• /
• 2001

This paper deals with two non-conventional HVDC system, that are, the Capacitor Commutated Converter (CCC) in which series capacitors are included between the converter transformer and the valves, and the Controller Series Capacitor Converter (CSCC), based on more conventional topology, in which series capacitors are inserted between the AC filter bus and the AC network. The simulation waveforms show that if these compare to conventional HVDC, these HVDC systems have many advantages in steady-state and transient performance.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.206-209
• /
• 2014

Control message exchange is major job for cognitive radio to exist and use spectrum opportunistically. For this control message exchange they need a common control channel (CCC). Once this channel is affected by a primary user, communication stops until new CCC is setup. This takes substantial time and if they could not get free channel, this halt continues for long time. To prevent such cease of communication, we propose a combination of two networks, namely WLAN and UWB, to let the communication continue. In our proposed idea if the CCC of a certain CR in WLAN is affected, the CR changes its network from WLAN to UWB and keeps the communication because UWB cannot be affected by PU. In the proposed idea every cognitive radio has two transceivers; one for the overlay network (WLAN) and another UWB network. If a primary user is detected in the spectrum of a cognitive radio, it continues exchanging control messages under the UWB network and in parallel negotiates for a new CCC using the WLAN network. This idea solves the communication interruption until new CCC is setup.

• Journal of Sericultural and Entomological Science
• /
• v.22 no.1
• /
• pp.46-51
• /
• 1980

The effects of foliar Spray of CCC [(2-Chloroethyl)-trimethyl-ammonium Chloride] on the growth of mulberry tree and the metabolic activities in the leaves were measured. The results of this experiment are summarized as follows; 1. Foliar application of CCC was not effective in increasing of leaf area, the fresh and dry weight of the leaves and height of shoot, but was effective in increasing of diameter of Shoot. 2. Chlorophyll Content was generally increased in all treated leaves 3. All the treated leaves were lower in GOT and GPT activity than control leaves. 4. The activities of hydrolytic reducing Sugar in the mulberry leaves infiltrated Sucrose were lower than those of the control in all treated leaves, but the activities on Synthetic non-reducing Sugar in the mulberry leaves infiltrated glucose were higher than those of control in all treated leaves.

• International Journal of Automotive Technology
• /
• v.6 no.5
• /
• pp.445-451
• /
• 2005

Most of the pollutants from passenger cars are emitted during the cold-transient phase of the FTP-75 test. In order to reduce the exhaust emissions during the cold-transient period, it is essential to warm up the catalyst as fast as possible after the engine starts, and the Unburned Exhaust Gas Ignition (UEGI) technology was developed through our previous studies to help close-coupled catalytic converters (CCC) reach the light-off temperature within a few seconds after cold-start. The UEGI system operates by igniting the unburned exhaust mixture by glow plugs installed upstream of the catalyst. The flame generates a high amount of heat, and if the heat is concentrated on a specific area of monolith surface, then thermal crack or failure of the monolith could occur. Therefore, it is very important to monitor the temperature distribution in the CCC during the UEGI operation, so the local temperatures in the monolith were measured using thermocouples. Experimental results showed that the temperature of CCC rises faster with the UEGI technology, and the CCC reaches the light-off temperature earlier than the baseline case. Under the conditions tested, the light-off time of the baseline case was 62 seconds, compared with 33 seconds for the UEGI case. The peak temperature is well under the thermal melting condition, and temperature distribution is not so severe as to consider thermal stress. It is noted that the UEGI technology is an effective method to warm up the catalyst with a small amount of thermal stress during the cold start period.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.2032-2041
• /
• 2004

Results from an experimental study of flow distribution in a close-coupled catalytic converter(CCC) are presented. The experiments were carried out with a flow measurement system specially designed for this study under steady and transient flow conditions. A pitot tube was a tool for measuring flow distribution at the exit of the first monolith. The flow distribution of the CCC was also measured by LDV system and flow visualization. Results from numerical analysis are also presented. Experimental results showed that the flow uniformity index decreases as flow Reynolds number increases. In steady flow conditions, the flow through each exhaust pipe made some flow concentrations on a specific region of the CCC inlet. The transient test results showed that the flow through each exhaust pipe in the engine firing order, interacted with each other to ensure that the flow distribution was uniform. The results of numerical analysis were qualitatively accepted with experimental results. They supported and helped explain the flow in the entry region of CCC.