• Journal of Environmental Science International
• /
• v.23 no.10
• /
• pp.1731-1743
• /
• 2014

The time variations in relative humidity observed at the Gangjeong (Goryeong) Reservoir in the Nakdong River over a one-year period (September 2012-August 2013) were analyzed with the Bowen ratio. The thermal vertical scale of the reservoir was also evaluated following Yamamoto's method. The study's results showed that the relative humidity at the reservoir was higher than that of the Daegu Meteorological Observatory (inland) all year round. The difference was slightly larger at nighttime (17-20 %) than at daytime (13-15 %) in all seasons except summer. The quantitative order of latent heat flux was summer, spring, autumn, and winter. This finding signifies that the thermal vertical scale of the reservoir corresponds to that of a shallow lake. The Bowen ratio was smallest at midday of the summer season. In other words, the net radiation energy was converted more as latent heat flux than sensible heat flux during a higher temperature period.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.104-105
• /
• 2010

울산 퇴적 분지에 분포하는 신현층의 이암층 노두에서 이매패에 속하는 Anadara 를 비롯한 여러 종류의 연체동물 화석을 채집하였다. Anadara 화석은 해성 기원의 연체동물로 Vicarya japonica Yabe and Hatai와 함께 소위 Vicarya-Anadara 군집에 속한다. 이 군집은 우리나라의 제3기 생층서를 이해하는데 가장 중요한 정보를 제공한다. 여기에서는 Andara 화석의 형태적 특징과 내부 구조를 고찰하고, 현생종과 비교하였다. 신현층에서 산출된 Anadara 화석은 1속 2종으로 구성된다. 각의 형태적 특징은 각의 외형이 삼각형에 가깝고, 표면에 25~30개의 방사륵이 발달해 있으며 인대면은 삼각형 모형으로, 교치선은 직선이다. 각의 내부 구조를 박편상에서 관찰한 결과, 4개의 층으로 구성되어 있다. Anadara 화석과 현생종 Scapharca subcrenata 을 비교한 결과, 각의 외형은 조금 다르나 내부구조는 서로 거의 유사하다. A. (H.) kakehataensis의 내부 구조는 최외층, 외층, 광휘층, 내층으로 구성되어 있다. 외층은 교차판 구조(crossed- lamellar structure)로 되어 있다. 또한 성장선이 발달되어 있으며, 복연부에 불규칙한 균열이 부분적으로 나타난다. 이는 외부로 노출되어 건조되고 다시 물기를 머금은 상태가 반복되어 수축 팽창에 의한 것이라고 생각되며, 별개의 층은 아니다. 내층은 엽상구조(foliated structure)가 관찰된다. 외층과 내층 사이에 아라고나이트로 구성된 광휘층이 나타나며, 능주 구조(prismatic structure)를 보이는 얇은 층이다. 최외층이 나타난다. A. (H.) daitokudoensis의 내부 구조는 A. (H.) kakehataensis와 서로 거의 유사하고, 내층, 외층, 광휘층 및 최외층의 4개의 층으로 구성된다. 엽상 구조인 내층, 교차판 구조인 외층, 능주 구조인 광휘층 및 최외층은 유기질층으로 되어있다.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.23-23
• /
• 2010

스발바드 서측에 위치하는 스피츠버겐 하부의 암석권맨틀의 분화시기를 규명하기 위하여, 두 개의 독립적인 방사성동위원소 시스템인 Lu-Hf과 Re-Os 시스템을 스피넬 페리도타이트(spinel peridotite)에 활용하였다. 전암에 대한 Re-Os 계통(Re-Os 에러크론, 알루미노크론, Re-결핍연대 등)은 연구지역의 페리도타이트가 대류하는 맨틀로부터 고기원생대/후기시생대에 분리되었음을 지시한다. 흥미롭게도 이런 연대는 페리도타이트내 단사휘석 결정들에 대하여 얻어진 Lu-Hf 에러크론 연대와 일치한다. 또한 시료 내에 지구화학적으로 기록된 현무암질 액의 결핍정도 역시 계통적으로 위의 연대를 지지한다. 위 연대는 스피츠버겐 서측부에 보고된 가장 오래된 지각의 연대와 일치한다. 따라서 연구지역의 암석권맨틀이 연약권으로부터 분리된 것은 접촉하고 있는 지각과 동시기적으로 이루어진 사건임을 알 수 있다. 연구지역은 팔레오세 이래로 복잡한 지구조적 응력장 변화(압축에서 신장환경으로의 변화)를 겪었다. 그럼에도 불구하고 지각과 커플링된 암석권맨틀이 현존한다는 것은 연구지역내 응력장변화가 대규모의 암석권 디라미네이션(delamination)을 유발하지는 않았다는 것을 의미한다. 그러므로 북극권의 화산활동을 설명하기 위하여 북극권 상부맨틀에 존재한다고 알려진 듀팔(DUPAL) 같은 부화된 물질의 성인으로 일부의 연구자들이 주장하여 온 디라미네이션된 암석권맨틀의 존재는 설득력이 없다고 판단된다.

• Journal of the Korean earth science society
• /
• v.35 no.5
• /
• pp.333-341
• /
• 2014

A new set of basis functions was constructed using the Rossby-Haurwitz waves, which are the eigenfunctions of nondivergent barotropic vorticity equations on the sphere. The basis functions were designed to be non-separable, that is, not factored into functions of either the longitude or the latitude. Due to this property, the nodal lines of the functions are aligned neither along with the meridian nor the parallel. The basis functions can be categorized into groups of which members have the same degree or the total wavenumber-like index on the sphere. The orthonormality of the basis functions were found to be close to the machine roundoffs, giving the error of $O(10^{-15})$ or $O(10^{-16})$ for double-precision computation (64 bit arithmetic). It was demonstrated through time-stepping procedure that the basis functions were also the eigenfunctions of the non-divergent barotropic vorticity equations. The projection of the basis functions was carried out onto the low-resolution geopotential field of Gaussian bell, and compared with the theory. The same projections were performed for the observed atmospheric-geopotential height field of 500 hPa surface to demonstrate decomposition into the fields that contain disturbance of certain range of horizontal scales. The usefulness of the new basis functions was thus addressed for application to the eigenmode analysis of the atmospheric motions on the global domain.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.245-248
• /
• 2000

In this paper we improve the performance of autonomous mobile robot by induction of reinforcement learning concept. Generally, the system used in this paper is divided into two part. Namely, one is neural-fuzzy and the other is dynamic recurrent neural networks. Neural-fuzzy determines the next action of robot. Also, the neural-fuzzy is determined to optimal action internal reinforcement from dynamic recurrent neural network. Dynamic recurrent neural network evaluated to determine action of neural-fuzzy by external reinforcement signal from environment, Besides, dynamic recurrent neural network weight determined to internal reinforcement signal value is evolved by genetic algorithms. The architecture of propose system is applied to the computer simulations on controlling autonomous mobile robot.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.9
• /
• pp.817-821
• /
• 2001

In this paper, a new learning methodology for kernel methods that results in a sparse representation of kernel space from the training patterns for classification problems is suggested. Among the traditional algorithms of linear discriminant function, this paper shows that the relaxation procedure can obtain the maximum margin separating hyperplane of linearly separable pattern classification problem as SVM(Support Vector Machine) classifier does. The original relaxation method gives only the necessary condition of SV patterns. We suggest the sufficient condition to identify the SV patterns in the learning epoches. For sequential learning of kernel methods, extended SVM and kernel discriminant function are defined. Systematic derivation of learning algorithm is introduced. Experiment results show the new methods have the higher or equivalent performance compared to the conventional approach.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.1
• /
• pp.14-18
• /
• 2002

The perceptron algorithm, which is one of a class of gradient descent techniques, has been widely used in pattern recognition to determine linear decision boundaries. However, it may not give desirable results when pattern sets are nonlinerly separable. A fuzzy version was developed to male up for the weaknesses in the crisp perceptron algorithm. This was achieved by assigning memberships to the pattern sets. However, still another drawback exists in that the pattern memberships do not consider class typicality of the patterns. Therefore, we propose a possibilistic approach to the crisp perceptron algorithm. This algorithm combines the linearly separable property of the crisp version and the convergence property of the fuzzy version. Several examples are given to show the validity of the method.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.6
• /
• pp.18-25
• /
• 2009

Venturi has long been an attractive method of measuring flow rate in a variety of engineering applications since pressure loss is relatively small compared with other measuring methods. The current study focuses on making detailed uncertainty estimations as the upstream flow disturbance affects uncertainty levels of the flow rate measurement. Upstream flow disturbance can be determined by 9 different swirl generators. Measurement uncertainty of flow rate has been estimated by a quantitative uncertainty analysis which is based on the ANSI/ASME PTC 19.1-2005 standard. The results of flow rate uncertainty analysis show that the case with systematic error has higher than that without systematic error. Especially the result with systematic error exhibits that the uncertainty of flow rate was gradually increased by swirl flow disturbance. The uncertainty of flow rate measurement can be mainly affected by differential pressure and discharge coefficient. Flow disturbance can be also reduced by increasing of the upstream straight length of Venturi.

• Journal of Technologic Dentistry
• /
• v.23 no.1
• /
• pp.45-53
• /
• 2001

This study was performed to investigate the effect of vent on the marginal discrepancy of PFM base metal castings. Eighteen identical wax patterns of a maxillary 3 unit anterior bridge were fabricated. Nine cases out of them were vented with $\phi$2.5mm sprue wax, for direct comparison as to the marginal discrepancy of the castings with the other non vented 9 ones. The mean value of marginal discrepancies of the vented castings was $85.02{\pm}25.57{\mu}m$, and that of the non vented was $163.21{\pm}69.88{\mu}m$ respectively. Statistical analysis revealed that marginal discrepancy of the vented casting was significantly reduced(p<0.05).

• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.55-65
• /
• 1999

So far, I Conducted an examination with focus on the type, characteristic, and test methods of impact test. which is a type of mechanical that evaluate materials. As mentioned previously, in testing soldering strength of soldering is the load when the object under experiment is broken down with the result of flexibility test or peel test. In this method, a hevay load is necessary until alloy of parent metal is bended, if the alloy of the parent metal has a large mechanical quality(peel strength or resisting power). Once the alloy of the parent metal is bended, however, it tends to come into pieces abruply form the part where soldered. Therefore, a metal has a high breakdown value if the degree of strength of its parent metal is high even if the result of measurement indicates otherwise. Thus, the result of the test did not correspond to the clinical result. Therefore, this study concludes as the following from a test of strength of soldering by mean of conducting an impact test, which is a type of mechanical evaluation methods : 1. Among various impact tests, a charpy thpe is more appropriate than the izod type in testing strength of soldering. 2. As far as test piece is concerned, to use subsized impact test piece is appropriate in the impact test in that it does not have notch. 3. In the matter of analysis, it is appropriate to measure absorbing energy which results from rupture of test piece.