• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.178-178
• /
• 2008

In order to improve static stability and healing of reattached labrum, we combined the advantages of suture bridge and transosseous technique. Using the conventional 3 portal for anterior instability, check stability of bony Bankart and preparation of glenoid bed in 3 way including removal, reshaping or mobilization of bony fragment. Two anchors were inserted to the superior and inferior portion and medial edge of bony Bankart lesion. It usually corresponded to the area of IGHL. Medial mattress sutures were applied around IGHL complex to get enough depth of glenoid coverage using suture hook. Make 3.5mm pushlock anchor hole to the articular edge of glenoid cartilage. Proximal suture bridge was applied at first and then distal suture bridge was inserted to mobilize the labrum in proximal direction. These construction can provide more stable labral repair with wide contact and compression in case of deficient bony stability. It not only avoids technical disadvantage of point contact with anchor fixation, but also decreasing gap formation through cross compression of labrum that couldn't gain even with the transosseous fixation which affords linear compression effect. Additional bony stability could be gained if the the bony fragment was mobilized to the glenoid margin with potential healing bed or reshaped for the good contact with reattached labrum.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.964-968
• /
• 2010

Ground anchor, commonly referred to as tiebacks or tie-down, is essentially steel elements secured in the ground by cement grout. They are used to provide either lateral or vertical support for various engineered structures, and are effective in all types of soil and rock. However, ground anchor can not be used in soft clay because anchor resistance would not be guaranteed. In this paper, conceptual introduction of the Smart Anchor is presented. The Smart Anchor is a kind of friction type anchor, the load is diffused and applied to the various parts of the distributed bond length, having less impact on the grout strength, and being able to secure necessary anchoring force in relatively soft grounds. This study shows a numerical study of predicting the load transfer of The Smart Anchor in soft clay. A beam-column analysis was performed by a elastic-plastic P-y curves in soft clay.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1060-1064
• /
• 2010

Ground anchors are mostly used to improve the resistance capacity of retaining walls. The end of the anchor is connected to retaining wall through tendons and the forces in tendons are transferred to ground. In this study, we plan that the new anchor system increases the tension force in tendons and improves the pullout resistance characteristics of the system. In order to increase the pullout resistance capacity of existing anchor system, the new anchor system is made by attaching four steel sticks to the tip of anchor end. So the field test results showed that the pullout resistance capacity of the wedge-shaped ground anchor was acceptable to elastic displacement range.

• Journal of Advanced Research in Ocean Engineering
• /
• 제3권2호
• /
• pp.59-65
• /
• 2017

When an anchor is dropped into the sea, there exists a danger of collision on the pipeline and subsea cables in the seabed. This collision could cause huge environmental disasters and serious economic losses. In order to secure the safety of subsea structures such as pipelines and subsea cables from the external impact, it is necessary to estimate the exact external force through the anchor's terminal velocity on the water. FLUENT, a computational fluid dynamic program, was used to acquire the terminal velocity and drag coefficient computation. A half-symmetry condition was used in order to reduce the computational time and a moving deforming mesh technique also adapted to present hydrostatic pressure. The results were examined with the equation based on Newton's Second Law to check the error rate. In this study, three example cases were calculated by stockless anchors of 5.25 ton, 10.5 ton, and 15.4 ton, and for the onshore experiment dropped height was back calculated with the anchor's terminal velocity in the water.

• Journal of Communications and Networks
• /
• 제18권5호
• /
• pp.796-805
• /
• 2016

In many wireless sensor network (WSN) applications, the information transmitted by an individual entity or node is of limited use without the knowledge of its location. Research in node localization is mostly geared towards multi-hop range-free localization algorithms to achieve accuracy by minimizing localization errors between the node's actual and estimated position. The existing localization algorithms are focused on improving localization accuracy without considering efficiency in terms of energy costs and algorithm convergence time. In this work, we show that our proposed localization scheme, called DV-maxHop, can achieve good accuracy and efficiency. We formulate the multi-objective optimization functions to minimize localization errors as well as the number of transmission during localization phase. We evaluate the performance of our scheme using extensive simulation on several anisotropic and isotropic topologies. Our scheme can achieve dual objective of accuracy and efficiency for various scenarios. Furthermore, the recently proposed algorithms require random uniform distribution of anchors. We also utilized our proposed scheme to compare and study some practical anchor distribution schemes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.517-520
• /
• 2005

The embedded suction anchor(ESA) is and anchor that is driven by a suction pile. The cross-sectional shape of the ESA anchor is circle. Its diameter is the same as that of the suction pile that is used to drive it into the seafloor. For the installation, the anchor is attached to the tip of the suction pile and then driven as a unit with the pile by and applied suction pressure. Once the ESA anchor reaches the desired depth, the pile is retrieved by applying a positive pressure. Finally, only the ESA anchor remains in the soil layer. This paper presents the results of centrifuge model tests to investigate ESA pullout capacity. The main parameters that have effects on the pullout capacity of ESA may include g-level, embedded depth, direction of loading, and loading point. The results of tests show that the pullout loading capacities increase as the loading point shift toward the tip of the anchors for a given loading direction. They also indicate that the loading point associated with the maximum pullout loading capacity is located at approximately 67 percent of the anchor length from the top for the horizontal load.

• 대한산업공학회지
• /
• 제22권2호
• /
• pp.265-276
• /
• 1996

Multimedia systems present information by various media, for example, video, sound, music, animation, movie, etc., in addition to the text which has long been used for conveying the information. Among many multimedia applications, the multimedia information retrieval systems commercialized in the forms of multimedia encyclopedia CD-ROMs, benefited from various media for their ability to present information in an efficient and complete way. But using several media, on the other hand, may cause end users' confusion and furthermore, poorly designed user interface often exacerbates the situation. In this study, the multimedia systems were studied from the standpoint of usability. The conceptual framework of the user interface of the multimedia system was newly defined. And 100 initial variables for user interface design of general multimedia systems were suggested through literature survey and expert opinions based upon the framework developed. Among various application areas, the multimedia information retrieval systems were chosen for investigation, and 36 variables particularly relevant to user interface of the multimedia information retrieval systems were selected. According to the sequential research strategy, the variables that were considered to be most important were finally selected through a screening stage. A part of selected variables were verified through a human factors experiment as the first step of sequential research. Based upon the result of the experiment, guidelines for user interface design were provided. For future study, the variables remained will be Investigated and the study will expand to another application areas.

• Geomechanics and Engineering
• /
• 제8권3호
• /
• pp.441-460
• /
• 2015

A new theoretical approach for analysis of stress around a tensioned anchor in rock is presented in this paper. The solution has been derived for semi-infinite elastic rock and anchor and for plane strain conditions. The method considers both the anchor head bearing plate and its grouted bond length embedded in depth. The solution of the tensioned rock anchor problem is obtained by superimposing the solutions of two simpler but fundamental problems: A distributed load applied at a finite portion (bearing plate area) of the rock surface and a distributed shear stress applied at the anchor-rock interface along the bond length. The solution of the first problem already exists and the solution of the shear stress distributed along the bond length is found in this study. To acquire a deep understanding of the stress distribution around a tensioned anchor in rock, an illustrative example is solved and stress contours are drawn for stress components. In order to verify the results obtained by the proposed solution, comparisons are made with finite difference method (FDM) results. Very good agreements are observed for the teoretical results in comparison with FDM.

• 한국방재학회 논문집
• /
• 제5권1호
• /
• pp.69-76
• /
• 2005

본 연구는 익스팬션(고하중 앵커와 웨지앵커)의 내력평가 하기 위한 실험적 연구이다. 하중조건은 인발, 전단 및 인발과 전단의 조합하중이다. 고하중 앵커와 웨지 앵커는 국내산 앵커를 사용하였으며, 무근콘크리트에 매입하였다. 앵커 파괴 및 콘크리트 파괴모드에 따른 기존의 앵커 설계식를 연구하였으며, 실험결과를 인발 및 전단내력의 상호작용에 관한 여러 모델들과 비교 분석하였다. 연구결과 다음과 같은 결론을 얻었다. 조합하중 작용 시 힘의 상호작용은 타원형 상호관계가 가장 적합한 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.338-350
• /
• 2010

As existing materials for ground reinforcement, chemical grout material using cementitous materials and waterglass was used. But many problems in terms of ground reinforcement effects were implicated. In this study, for development and applicability verification of new materials, viscosity, fluidity, permeability, Self-Leveling, keeping of drilled hole, antiwashout underwater, resistance of water (groundwater dilution and minimize material eluting) and the early strength and long-term strength characteristics of developed materials was confirmed, and material standards, and establishing construction standards for the various model tests were conducted. As a result, high viscosity, flowability, permeability and keeping of drilled hole characteristics are excellent, in addition to the early strength properties, dilution does nat occur to groundwater, including groundwater is available for dealing with environmental issues. Application of basic and reinforcement method by Filler function in addition to structure can also or development of a new concept can be expected. In addition, middle and large-diameter drilled shaft, micropile, ground anchors, soil-nailing, steel pipes multi-grouting reinforcement for cement injection process could be used enough to even be considered.