• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.75-88
• /
• 2005

Ameloblastoma is the most commonly occurring odontogenic tumor in oral cavity. Although most are benign epithelial neoplasm, they are generally considered to be locally aggressive and destructive, exhibiting a high rate of recurrence. The biological behavior of this neoplasm is a slowly growing, locally invasive tumor without metastasis, therefore malignant neoplasm, changed its histological appearance to carcinoma or showed distant metastasis, is only defined clinically. In this study, we identified the differentially expressed genes(DEGs) in stages under benign or malignant ameloblastoma compared with normal patient using ordered differential display(ODD) reverse transcription(RT)-PCR and $GeneFishing^{TM}$ technology. ODD RT-PCR is rather effective when the investigation of samples containing very small amounts of total RNA must be accomplished. ODD RT-PCR used the means of amplification with anchored T-primer and adaptor specific primer. bearing definite two bases at their 3' ends and so this method could display differential 3'-expressed sequence taqs(ESTs) patterns without using full-length cDNAs. Compared with standard differential display, ODD RT-PCR is more simple and have enough sensitivity to search for molecular markers by comparing gene expression profiles, However, this method required much effort and skill to perform. $GeneFishing^{TM}$ modified from DD-PCR is an improved method for detecting differentially expressed genes in two or more related samples. This two step RT-PCR method uses a constant reverse primer(anchor ACP-T) to prime the RT reaction and arbitrary primer pairs(annealing control primers, ACPs) during PCR. Because of high annealing specificity of ACPs than ODD RT-PCR, the application of $GeneFishing^{TM}$ to DEG discovery generates reproducible, authentic, and long(100bp to 2kb) PCR products that are detectable on agarose gels. Consequently, various DEGs observed differential expression levels on agarose gels were isolated from normal, benign, and malignant tissues using these methods. The expression patterns of the some isolated DEGs through ODD RT-PCR and $GeneFishing^{TM}$ were confirmed by Northern blot analysis and RT-PCR. The results showed that these identified DEGs were implicated in ameloblastoma neoplasm processes. Therefore, the identified DEGs will be further studied in order to be applied in candidate selection for marker as an early diagnosis during ameloblastoma neoplasm processes.

• Clinics in Shoulder and Elbow
• /
• v.15 no.1
• /
• pp.16-24
• /
• 2012

Purpose: This study was designed to investigate the rate of incidence, location and the clinical value of the rotator cuff retear by analyzing MRI scans, which was taken after an arthroscopic rotator cuff repair. Materials and Methods: This study included a total of 109 patients, who underwent a shoulder MRI scan after an average of 10.6 months later from the arthroscopic rotator cuff repair. We only defined the 'retear' when the Sugaya type IV and V was observed in the sagittal section of the MRI. The location of the retear was divided into the medial and lateral areas by the site, which was 1 cm medial to the anchor insertion. We investigated the incidence rate and the location of the retear, in terms of the age, sex, initial tear size and the suture method. Also, we compared the functional score of the retear group and the non-retear group, after an average of 13.9 months follow-up. Results: There were 38 of the 109 patients that showed the rotator cuff retear. Of these patients, 25 were male patients, and 13 were female patients. Of the 38 patients with the rotator cuff retear, 21 patients were included in the <3 cm retear group, and 17 were included in the ${\geqq}3$ cm retear group. At the end of the follow up period, all 109 patients showed a statistical significant improvement in the shoulder functional score. Conclusion: According to the follow up of the MRI scan, which was taken after the rotator cuff repair, the retear rate reached 34.9 %, and there were no significant differences on the age and the suture method. More rotator cuff retear occurred in male patients, and the initial tear size was positively correlated with the incidence rate of the rotator cuff retear. Also, the retear was more frequently observed at the medial side. That is because when the suture was performed, excessive tension was loaded on the medial side of the suture site.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.448-457
• /
• 2015

Developing rice lines with various amylose contents is necessary to diverse usages of rice in terms of raw materials for processed food production, and thereby to promote rice consumption in Korea. A rice mutant line, 'Namil(SA)-dull1' was established through sodium azide mutagenesis on 'Namil', a non-glutinous Korean Japonica rice cultivar. Namil(SA)-dull1' had dull endosperm characteristics and the evaluated amylose content was 12.2%. A total of 94 F2 progenies from a cross between 'Namil(SA)-dull1' and 'Milyang23', a non-glutinous Tongil-type rice cultivar, was used for genetic studies on the endosperm amylose content. Association analyses, between marker genotypes of 53 SSR anchor markers and evaluated amylose contents of each 94 F2:3 seeds, initially localized rice chromosome 6 as the harboring place for the modified allele(s) directing low amylose content of 'Namil(SA)-dull1'. By increasing SSR marker density on the putative chromosomal region followed by association analyses, the target region was narrowed down 0.94 Mbp segment, expanding from 28.95 Mbp to 29.89 Mbp, on rice chromosome 6 pseudomolecule. Among the SSR loci, RM7555 explained 84.2% of total variation of amylose contents in the $F_2$ population. Further physical mapping on the target region directing low amylose content of 'Namil(SA)-dull1' would increase the breeding efficiency in developing promising rice cultivars with various endosperm characteristics.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.18-28
• /
• 2015

The purpose of this study is to develop a new seismic resistant method by using precast concrete wall panels for existing low-rise, reinforced concrete beam-column buildings such as school buildings. Three quasi-static hysteresis loading tests were performed on one unreinforced beam-column specimen and two reinforced specimens with U-type precast wall panels. The results were analyzed to find that the specimen with anchored connection experienced shear failure, while the other specimen with steel plate connection principally manifested flexural failure. The ultimate strength of the specimens was determined to be the weaker of the shear strength of top connection and flexural strength at the critical section of precast panel. In this setup of U-type panel specimens, if a push loading is applied to the reinforced concrete column on one side and push the precast concrete panel, a pull loading from upper shear connection is to be applied to the other side of the top shear connection of precast panel. Since the composite flexural behavior of the two members govern the total behavior during the push loading process, the ultimate horizontal resistance of this specimen was not directly influenced by shear strength at the top connection of precast panel. However, the RC column and PC wall panel member mainly exhibited non-composite behavior during the pull loading process. The ultimate horizontal resistance was directly influenced by the shear strength of top connection because the pull loading from the beam applied directly to the upper shear connection. The analytical result for the internal shear resistance at the connection pursuant to the anchor shear design of ACI 318M-11 Appendix-D, agreed with the experimental result based on the elastic analysis of Midas-Zen by using the largest loading from experiment.

• Journal of The Korean Association For Science Education
• /
• v.18 no.4
• /
• pp.601-615
• /
• 1998

Establishing and evaluating science education policies and revising and monitoring the effectiveness of science curriculum should be based upon the results of systematic and scientific research studies. Advanced nations have already been administering and developing national level science assessments for these purposes. The science assessments administered in Korea have been reported having many limitations and problems, and not succeeded in providing data for science education policy making and curriculum reform. The major purpose of the study is developing national level science knowledge assessment system in order to identify longitudinal trends of elementary and secondary school students science knowledge achievements. The research team consisted of science education experts and teachers from various school levels, decided the directions and major elements of national level science knowledge assessment with the consultation of educational evaluation experts. Item developing ability of the researchers was improved by seminars? and workshops on national assessment in advanced nations and developing skills of writing science items. Nearly 500 items were developed and revised. Pilot test was administered with 958 students at various school levels. 380 items were selected and tested with 8766 students, and the characteristics were analyzed in terms of item response theory. The target populations for national level science knowledge assessment are 5th-grade of elementary school, 2nd-grade of middle school, 1st and 2nd-grade of high school students. The proper period for the assessment is February every year. Multi-stage clustered sampling method is desirable and rotated forms are recommendable for the test format. Bridge items should be introduced to compare the results of multiple tests, and various grades. Anchor items should also be used for longitudinal interpretations of the results. The items for elementary school require low to medium abilities, for middle school and first grade of high school require medium to high abilities and for 2nd-grade of high school high abilities. The discrimination ability of the items developed is high.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.488-494
• /
• 1999

Hydrolytic peptides of salted and fermented anchovy sauce, and anchovy actomyosin for the development of a rapid fermentation method with conventional tastes and flavors were studied. The optimal temperatures of crude enzymes isolated from anchor, liver and viscera of squid were 55, 40$\~$45 and $45\~60^{\circ}C$, respectively. Crude enzyme isolated from anchovy was more effective on hydrolysis of anchovy actomyosin than that from squid liver and viscera. But the crude enzyme from squid liver was less effective on NaCl than that from anchovy. Three peptides occurred in anchovy actomyosin hydrolyzed with crude enzymes from anchovy and squid liver for 30 min. Their molecular weight were determined by Superdex 200 gel chromatography as 10,800, 5,800 and 2,600 dalton. When anchovy sauce was hydrolyzed with crude enzymes of anchovy, squid liver and viscera, and Protamex during 70 days, ranges of their low molecular weight of hydrolyzed peptides were 300$\~$1,000dalton detected by Sephadex G-50 and their major amino acid compositions were glutamic acid, glycine and alanine, which was related with conventional tastes. Those amino acid compositions were similar to those of anchovy sauce hydrolyzed with squid liver, In the case of Protamex treatment, hydrolyzed peptides had high levels of isoleucine and leucine, being associated with the bitter, but a low level of glutamic acid.

• Journal of Korea Port Economic Association
• /
• v.31 no.2
• /
• pp.41-53
• /
• 2015

In Paracomon Inc. v. Telus Communication, Realice's anchor became entangled with a working fiber-optic submarine cable during its voyage and are presentative of the shipowner(the captain) cut the cable. The owner of the cable brought a claim for the repair cost against the shipowner. The shipowner then advanced a third party claim against a liability insurance underwriter. The Supreme Court of Canada (SCC) held that the shipowner was entitled to limit its liability under the 1976 Convention on the Limitation of Liability for Maritime Claims. The SCC also ruled that even though the misdeed of the shipowner was insufficient to break its right to limitation of liability, its wrongdoing constituted willful misconduct under the 1993 Canada Marine Insurance Act, allowing the underwriter to deny coverage for the incident. Thecasewasthefirsttoaddresstheinterrelationship between the shipowner's right to limit liability under the international convention regime and the availability of liability insurance with respect to such limited liability. This study analyzes the reasoning behind the SCC's judgment and evaluates the appropriateness of this court's decision based on the current maritime industry as well as prevailing maritime law. It concludes that the SCC's decision to declare that the shipowner retained the right to limit its liability is appropriate under the Limitation Convention (1976). However, its declaration that the liability insurer was discharged from liability is not correct in due consideration of the common recognition in the maritime industry, the intended purpose of a third party's right against the liability insurer, and the adoption process of the conduct barring limitation. Based on the SCC's decision, this study finally reviews the issue of the shipowner's right to limit and the coverage of the liability insurer in the Sewol case (2014).

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.100-117
• /
• 2020

National Treasure no. 101, the stupa of State Preceptor Jigwang from the Beopcheonsa Temple Site in Wonju has been transferred from place to place and reassembled several times since it was built. In particular, overall dismantling and repair was carried out in 1957 to restore parts damaged by bombing during the Korean War. Documented information on the repair process and materials used at that time does not exist. However, various types of metal materials used for this stupa have been identified during conservation work. Besides clamps anchor bolts, 9mm-thick circular rebars were mainly used for joining the parts of this stupa, while circular rebars and wires of various thicknesses were used for joining the parts with mortar restoration materials. Although deformed bars are typically used for stone pagodas classified as architectural structures, smooth circular rebars were used in this case. In terms of restoration using mortar, material shapes were transformed, bound alternately, and twisted irregularly to improve bonding strength and coherence in order to insert restoration materials and to bolster structural weaknesses. In addition, metallographic analysis showed the material to be hypo-eutectoid steel with low carbon content. Many non-metallic inclusions in the shape of drops of different sizes were included, which do not affect the whole elemental composition due to the very small quantities involved. Qualitative and EPMA analysis of Mn and S, which were not identified by SEM-EDS area analysis, established an even distribution of MnS in crystal grains of the microstructure, regardless of the shape of the samples. It is presumed that secondary homogenization and softening might have been conducted after manufacturing to facilitate the working process. Furthermore, in consideration of properties indicating that the thinner the steel is, the less carbon content contained and the greater the elasticity and elongation, it is judged that restoration work was ordered.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.2
• /
• pp.33-51
• /
• 2022

This study analyzes newly listed companies on KOSDAQ from 2011 to 2020 for both firms having experience in attracting venture investment before listing (VI) and those without having experience in attracting venture investment (NVI) by examining differences between two groups (VI and NVI) with respect to both the level of listing performance and that of firm performance (growth) after the listing. This paper conducts descriptive statistics, mean difference, and multiple regression analysis. Independent variables for regression models include VC investment, firm age at the time of listing, firm type, firm location, firm size, the age of VC, the level of expertise of VC, and the level of fitness of VC with investment company. Throughout this paper, results suggest that listing performance and post-listed growth are better for VI than NVI. VC investment shows a negative effect on the listing period and a positive effect on the sales growth rate. Also, the amount of VC investment has negative effects on the listing period and positive effects on the market capitalization at the time of IPO and on sales growth among growth indicators. Our evidence also implies a significantly positive effect on growth after listing for firms which belong to R&D specialized industries. In addition, it is statistically significant for several years that the firm age has a positive effect on the market capitalization growth rate. This shows that market seems to put the utmost importance on a long-term stability of management capability. Finally, among the VC characteristics such as the age of VC, the level of expertise of VC, and the level of fitness of VC with investment company, we point out that a higher market capitalization tends to be observed at the time of IPO when the level of expertise of anchor VC is high. Our paper differs from prior research in that we reexamine the venture ecosystem under the outbreak of coronavirus disease 2019 which stimulates the degradation of the business environment. In addition, we introduce more effective variables such as VC investment amount when examining the effect of firm type. It enables us to indirectly evaluate the validity of technology exception policy. Although our findings suggest that related policies such as the technology special listing system or the injection of funds into the venture ecosystem are still helpful, those related systems should be updated in a more timely fashion in order to support growth power of firms due to the rapid technological development. Furthermore, industry specialization is essential to achieve regional development, and the growth of the recovery market is also urgent.