• 대한물리치료과학회지
• /
• 제9권3호
• /
• pp.161-170
• /
• 2002

knee injuries are among the most common problems confronting patients, physical therapist and physicians. since the bony structure provides little stability, the soft tissues are required to withstand high forces, often resulting in tissue overload and injury immobilization of the knee in the presence of a hemarthrosis usually leads to proliferation of intraarticular connective tissue adhesions and pint fibrosis. the physical basis of treating scar tissue is early controlled motion. the management of the knee with increased instability is to strengthening the muscles to properly treat an soft tissue injuries, physical therapist should know about the anatomic structures and biomechanical function of the knee joint, in this review article, we discuss the physiologic properties of soft tissue, biomechanical observation in fibrous connective tissue, managing soft tissue contractures, principles in treating scar tissue and treatment of the knee with increased instability.

• 대한치과교정학회지
• /
• 제42권4호
• /
• pp.169-181
• /
• 2012

Objective: The purpose of this study was to develop superimposition method on the lower arch using 3-dimensional (3D) cone beam computed tomography (CBCT) images and orthodontic 3D digital modeling. Methods: Integrated 3D CBCT images were acquired by substituting the dental portion of 3D CBCT images with precise dental images of an orthodontic 3D digital model. Images were acquired before and after treatment. For the superimposition, 2 superimposition methods were designed. Surface superimposition was based on the basal bone structure of the mandible by surface-to-surface matching (best-fit method). Plane superimposition was based on anatomical structures (mental and lingual foramen). For the evaluation, 10 landmarks including teeth and anatomic structures were assigned, and 30 times of superimpositions and measurements were performed to determine the more reproducible and reliable method. Results: All landmarks demonstrated that the surface superimposition method produced relatively more consistent coordinate values. The mean distances of measured landmarks values from the means were statistically significantly lower with the surface superimpositions method. Conclusions: Between the 2 superimposition methods designed for the evaluation of 3D changes in the lower arch, surface superimposition was the simpler, more reproducible, reliable method.

• 구강회복응용과학지
• /
• 제30권3호
• /
• pp.231-237
• /
• 2014

만성 편두통 치료법으로 보툴리눔 독소가 2010년 미국 FDA에 승인된 이후 임상에서 널리 사용되고 있다. 그럼에도 불구하고 각 주사점에 관한 확실한 정의와 주의사항에 관한 지침이 없는 것이 현실이다. 따라서 본 연구는 측두근 주사시 주의해야 할 해부학적 구조물에 대해 정확한 해부학적 지식과 안전하게 주사할 수 있는 영역에 관해 지금까지 보고된 문헌들을 토대로 자세히 고찰하고자 한다.

• Clinics in Shoulder and Elbow
• /
• 제13권2호
• /
• pp.299-303
• /
• 2010

목적: 주관절 강직의 관절경적 처치는 효과적이지만 술자의 능력이 요구되는 것이 사실이다. 이 종설의 목적은 주관절 강직에 대한 관절경적 처치 방식을 기술하고자 한다. 대상 및 방법: 비수술적 치료에 반응하지 않는 주관절 강직의 경우 운동 제한을 유발하는 연부 조직 및 골성 물질을 제거하게 된다. 이때 주두, 구상 돌기의 골극과 유리체의 제거는 합병증의 빈도는 낮고 좋은 결과를 보장한다. 결과 및 결론: 관절경을 이용한 주관절 강직의 치료에서는 구축된 조직을 절제하고 중요한 해부학적 구조물들을 보호하기 위한 지식과 숙련된 기술이 필수적이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권2호
• /
• pp.173-179
• /
• 2009

Dentigerous cyst is an odontogenic cyst which occurs in unerupted tooth crown. After the crown formation, enamel epithelium remnants surrounded continuously proliferates and it forms effusionfluid cyst and expands due to increased internal osmotic pressure. Treatments of cysts are mainly enucleation, marsupialization and de-compression. When deciding the way of treatment, the age of a patient, the anatomical circumstances, the region of lesion and the size of cyst should be considered. Marsupialization is that some parts of internal cystic wall would be converted into oral mucosa if the cyst is large size and is concerned about neighboring anatomic structure. It can be accompanied by enucleation later and eruption of related tooth can be possible. If there is a limitation of spontaneous tooth eruption, eruption of tooth can be induced by orthodontic apparatus. There were 3 patients had dentigerous cyst and underwent marsupialization, their impacted teeth had preserved and had induced eruption, all showing satisfactory results.

• Imaging Science in Dentistry
• /
• 제46권1호
• /
• pp.57-62
• /
• 2016

Fusion is an abnormality of tooth development defined as the union of two developing dental germs, resulting in a single large dental structure. This irregular tooth morphology is associated with a high predisposition to dental caries and periodontal diseases. As a result of recurring inflammatory periodontal processes, disorders such as periodontal pocket, pericoronitis, and paradental cysts may develop. A rare mandibular anatomic variation is the retromolar canal, which is very significant for surgical procedures. The fusion of a paramolar and mandibular third molar associated with a paradental cyst co-occurring with the presence of a retromolar canal is rare, and the aim of the present study is to describe the evaluation of this anatomical configuration using cone-beam computed tomography.

• Journal of Oral Medicine and Pain
• /
• 제46권3호
• /
• pp.93-97
• /
• 2021

The limited mouth opening, also known as trismus, can result from temporomandibular joint disorders, infection, neoplasm, trauma, and abnormal anatomic structure like coronoid hyperplasia. Head and neck cancer patients often complain of limited mouth opening, which is usually induced by myofibrotic contracture of masticatory muscle. But clinicians should consider any reasons such as infection or cancer growth and metastasis if trismus gets worse or pain develops. We report the case of the patient, who was diagnosed with myxofibrosarcoma on nasal cavity. He had suffered from trismus after concurrent chemoradiotherapy. However, pain had developed and trismus had worsened. He was diagnosed with infratemporal space abscess and myositis of masticatory muscles.

• Journal of Korean Neurosurgical Society
• /
• 제65권2호
• /
• pp.173-179
• /
• 2022

Disabilities can emerge due to traumatic spinal fractures. In terms of sacrococcygeal spine, because of its unique anatomic structure with minimal movement, the possibility for it to have a disability is relatively low. In Korea, unlike most disability criteria, private insurance companies acknowledge angular deformities caused by vertebral fractures as disabilities according to their degree, so there were several cases where patients required compensation, arguing angular deformity caused by sacrococcygeal fracture, which in some cases led to legal conflicts. Except the Act Welfare of Persons with Disabilities which recognizes only severe angular deformity affecting internal organs as disability and the industrial accident disability evaluation which does not recognize coccygeal fracture as disability but rarely recognizes sacral vertebra deformity equivalent to compressive deformation, there is little or no case where angular deformity is recognized as disability. Given the impairment evaluation standards in social insurance, McBride system, American Medical Association (AMA) guides, and newly proposed standards by the Korean Academy of Medical Sciences (KAMS), the most contentious point in the general terms and conditions of private insurance is spinal deformity. To overcome controversy over disability evaluation, the private insurance sector is now applying criteria for axial skeleton to sacrococcygeal vertebrae through revision of standards. Under these circumstances, it is fair to recognize sacrococcygeal fracture as impairment in terms of the pelvis only when the fracture leaves serious deformity and neurological symptoms with clear relevancy. Though it may not be easy to develop accurate disability evaluation standards, improvement is necessary to remove any irrationalities and make the standards as objective as possible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권4호
• /
• pp.372-380
• /
• 2005

Condylar process of mandible, has the specialized anatomic structure compared with any other body structure, acts directly in connection with mastication and speech and so on. In general, mandibular condyle fractures have been managed by two methods as open and closed reduction. But, there are no reasonable consensus about the proper management of this injury. This study was designed for analysis of the prognosis of two methods of treatment, open and closed reduction, with positional change of fractured condyle and complications within 6 months post-intermaxillary fixation period. We conducted a retrospective analysis of 154 patients whose unilateral mandibular condyle fractures were treated by open or closed reduction in our department. The horizontal, sagittal, and coronal change of the condyle was examined using modified Towne's and panoramic radiographs before intermaxillary fixation(IMF), immediately after IMF, and at 6 months after IMF. Patients, whose mandibular condyle fractures were treated by closed reduction, had significantly shorter ramus height on the side of injury(P<0.05). But, fractured condylar fragments were displaced insignificantly with aspect to sagittal and coronal plane(P>0.05). The level of the fracture influenced the ramus length and the degree of coronal change in the closed reduction group(P<0.05). There was no significant correlation among the level of the fracture, treatment methods and complications(P>0.05). From the results obtained in this study, fractured mandibular condyles, were treated by closed reduction, had a tendency that continuous condylar displacement was occurred with aspect to horozontal and coronal plane in treatment period including intermaxillary fixation. And then there was a correlation between the level of the fracture and the position change in close reduction group statistically. These result suggested that care must be taken in basing treatment decisions on the degree of displacement of the condyle and in treating the mandibular condyle fractures for a long time.

• 대한의용생체공학회:의공학회지
• /
• 제39권1호
• /
• pp.22-29
• /
• 2018

Intervertebral disc(IVD) mainly consists of Annulus fibrosus(AF) and Nucleus pulposus(NP), playing a role of distributing a mechanical load on vertebral body. IVD tissue engineering has been developed the methods to achieve anatomic morphology and restoration of biological function. The goal of present study is to identify the possibilities for creating a substitute of IVD the morphology and biological functions are the same as undamaged complete IVD. To fabricate the AF and NP combine biphasic IVD tissue, AF tissue scaffolds have been printed by 3D bio-printing system with natural biomaterials and NP tissues have been prepared by scaffold-free culture system. We evaluated whether the combined structure of 3D printed AF scaffold and scaffold-free NP tissue construct could support the architecture and cell functions as IVD tissue. 3D printed AF scaffolds were printed with 60 degree angle stripe patterned lamella structure(the inner-diameter is 5mm, outer-diameter is 10 mm and height is 3 mm). In the cytotoxicity test, the 3D printed AF scaffold showed good cell compatibility. The results of histological and immunohistochemical staining also showed the newly synthesized collagens and glycosaminoglycans, which are specific makers of AF tissue. And scaffold-free NP tissue actively synthesized glycosaminoglycans and type 2 collagen, which are the major components of NP tissue. When we combined two engineered tissues to realize the IVD, combined biphasic tissues showed a good integration between the two tissues. In conclusion, this study describes the fabrication of Engineered biphasic IVD tissue by using enable techniques of tissue engineering. This fabricated biphasic tissue would be used as a model system for the study of the native IVD tissue. In the future, it may have the potential to replace the damaged IVD in the future.