• Environmental Analysis Health and Toxicology
• /
• 제4권1_2호
• /
• pp.11-17
• /
• 1989

A quantitative analytical method of highly concentrated PCB is established in the research. With the quantitative analytical method PCB of insulating oil was examined. The following conclusions are derived from this research. 1. The recovery ratio was 95.7% with the quantitative analytical method, which indicates it can be used for the analysis of PCB. 2. PCB concentration of insulation oil in waste condenser was found to be 21.2% thru 13.85% , which was highly concentrated. 3. PCB insulation oil in waste condenser was same as PCB-42.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.617-620
• /
• 2003

This paper presents the confinement effect of transverse reinforcement and cross-tie in hollow rectangular sectional columns. 20 analytical models with different amounts of transverse reinforcement and cross-tie in a plastic hinge region were analyzed by 3D nonlinear FEM. The analytical results show that the higher ductility can be achieved by the resonable combination of transverse re-bar and cross-tie providing sufficient lateral confinement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.821-826
• /
• 1998

The design methods for the steel plate strengthened RC structures are not well established yet because the structural behavior of plated RC beams is more complex than that of regular unplated ones. The main purpose of this paper is to present the premature failure mechanism of steel plate strengthened RC beams. The analytical models of interfacial stress and normal are also proposed in this paper. The comparisons between the analytical results using the proposed theory and experimental ones relatively satisfied.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2006년도 춘계 학술발표회 논문집 제3권1호(통권3호)
• /
• pp.81-87
• /
• 2006

This study has been conducted to predict the ultimate moment capacities of double angle connections with various angle thicknesses and bolt gage distances. Considering the results of experimental tests conducted previously, a simplified analytical model is suggested in this research. In addition, some basic data are also provided for structural engineers to design a double angle connection preliminary.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제23권4호
• /
• pp.1015-1022
• /
• 2009

본 논문에서는 대학교육의 현장에서 수학 전공 과목을 이수하는 학생들에게 수학을 지도함에 있어서 몇 가지 기본적인 문제 해결의 기법을 제시하고 수학에 흥미를 갖도록 하는 방법을 기술하고자 한다.

• Wind and Structures
• /
• 제18권2호
• /
• pp.103-116
• /
• 2014

Aeroelasticity is the main source of instability in structures which are subjected to aerodynamic forces. One of the major reasons of instability is the coupling of bending and torsional vibration of the flexible bodies, which is known as flutter. The presented investigation aims to study the aeroelastic stability of composite blades of wind turbine. Geometry, layup, and loading of the turbine blades made of laminated composites were calculated and evaluated. To study the flutter phenomenon of the blades, two numerical and analytical methods were selected. The finite element method (FEM), and JAR-23 standard were used to perform the numerical studies. In the analytical method, two degree freedom flutter and Lagrange's equations were employed to study the flutter phenomena analytically and estimate the flutter speed.

• 유공압시스템학회논문집
• /
• 제6권1호
• /
• pp.25-31
• /
• 2009

This study presents an analytical model of hydraulic clutch system of a power shift transmission to analyze pressure modulation characteristics. A typical hydraulic clutch system was modeled by using AMESim in which the parameters of major components were measured for simulation. Test apparatus was established using the components of power shift and power shuttle clutches with instrumental equipment. The results of simulation and experiment were so close that the proposed analytical model in this study was validated. However the cylinder model analogized clutch dynamics need to be improved in future study. The effects of parameters of orifice diameter, accumulator stroke and oil temperature on pressure modulation were analyzed respectively. The results of parameter sensitivity analysis show that modulation time and set pressure can be easily adjusted by changing parameter values. It is also found that the hydraulic clutch system used in this study is so susceptible to oil temperature that cooling equipment is necessary.

• 약학회지
• /
• 제58권3호
• /
• pp.190-199
• /
• 2014

The Korean Pharmaceutical Codex (KPC) analytical method of ambroxol hydrochloride and clenbuterol hydrochloride formulation is complicated and needed to carry out multiple processes during the test. To improve the low efficiency of analytical procedure that makes pharmaceutical laboratory consume much time and high cost to conduct the test of this formulation, this study was performed for simplifying the pretreatment process and optimizing conditions of the HPLC assay. The analytical procedure using HPLC was developed to establish analytical specification for ambroxol hydrochloride and clenbuterol hydrochloride formulations. The newly developed analytical method has good linearity ($R^2$ >0.999), specificity, precision (RSD<1.0%) and the recovery ranges of 98.50~101.84% for ambroxol, 98.29~101.35% for clenbuterol syrup and 98.66~101.71% for clenbuterol tablets. The LOQs were 0.204 ${\mu}g/ml$ for ambroxol, 0.021 ${\mu}g/ml$ for clenbuterol syrup and 0.073 ${\mu}g/ml$ for clenbuterol tablets. The new method was performed with commercially available samples to confirm analytical conditions and validated to be suitable for saving time and cost to control the quality of routine manufactured products. This analytical method will be used for revising the monograph of ambroxol hydrochloride and clenbuterol hydrochloride formulation in next supplement of KPC.

• 한국방재학회 논문집
• /
• 제11권3호
• /
• pp.111-116
• /
• 2011

본 연구에서는 횡방향 하중을 받는 말뚝의 해석 해를 유도하고 그로부터 말뚝의 거동분석과 더불어 긴 말뚝으로의 거동기준이 되는 임계 말뚝길이(critical pile length)를 지반조건을 달리하여 구하고 비교 분석하였다. 또한 해석 해에 의한 말뚝의 거동과 p-y곡선을 적용한 수치해석을 통해 말뚝의 거동을 비교분석하였다. 해석 해에 따르면 밀도를 달리한 지반조건에 대해 무차원 임계 말뚝길이는 해석에서 고려한 세 가지 말뚝머리 경계조건에 있어 2.3~3.2 사이였다. 해석 해에 의한 결과와 수치해석에 의한 결과를 비교하면 말뚝길이에 따른 말뚝의 변형과 모멘트 분포양상은 유사하였다. 말뚝머리 변형량은 해석에 의한 경우가 수치해석에 의한 경우보다 보수적인 값을 보여주었으며 휨모멘트의 값은 해석에 의한 값과 수치해석에 의한 값 사이에 큰 차이를 보이지 않았다.

• International Journal of Computer Science & Network Security
• /
• 제21권3호
• /
• pp.134-140
• /
• 2021

The development of technology speeds up the process of obtaining information and its analysis to track the level of corruption in different countries and develop countermeasures. This study examines the role of information and analytical support of anti-corruption policy as a tool for government accountability and analysis, evaluation, combating corruption in Eastern Europe. The purpose of the article is to identify the components of the information-analytical system that help reduce the level of corruption. The research methodology is based on a qualitative content analysis of the functioning of information and analytical systems of Ukraine used by anti-corruption bodies. A quantitative analysis of the CPI score was conducted, according to Transparency International, to identify the effectiveness of anti-corruption policies in developing countries. The results show similar trends in countries developing on the effect of the use of information and analytical systems in the implementation of anti-corruption policies, strategies and measures. The strategy to combat corruption mainly involves increasing the independence and powers of anti-corruption bodies. Therefore, the development of information and analytical support is aimed at automating the processes of pre-trial investigations and criminal proceedings, information protection. As a tool for accountability, information and analytical systems may be ineffective due to the abuse of power by higher anti-corruption bodies due to political pressure from elite structures. Restrictions on political will are a major problem for the effectiveness of anti-corruption policies.