• Journal of Soil and Groundwater Environment
• /
• v.16 no.6
• /
• pp.46-57
• /
• 2011

In this study, analytical solution of multip-species transport equations coupled with a first-order reaction network under constant concentration boundary condition or total flux boundary condition is obtained using similarity transformation approach of Clement et al. (2000). The study shows the schematic process about how multi-species transport equations with first-order sequential reaction network is transformed through the similarity transformation approach into independent and uncoupled single species transport equations with first-order reaction. The analytical solution was verified through the comparison with popular commercial programs such as 2DFATMIC and RT3D. The analytical solution can be utilized in nuclear waste sites where radioactive contaminants and their daughter products occur and in industrial complex cities where chlorinated solvent such as PCE, TCE, and its biodegradation products produces. In addition, it can help the verification of the developed numerical code.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.952-969
• /
• 2019

This study develops new analytical solutions to water wave diffraction by vertical truncated cylinders in the context of linear potential theory. Three typical truncated surface-piercing cylinders, a submerged bottom-standing cylinder and a submerged floating cylinder are examined. The analytical solutions utilize the multi-term Galerkin method, which is able to model the cube-root singularity of fluid velocity near the edges of the truncated cylinders by expanding the fluid velocity into a set of basis function involving the Gegenbauer polynomials. The convergence of the present analytical solution is rapid, and a few truncated numbers in the series of the basis function can yield results of six-figure accuracy for wave forces and moments. The present solutions are in good agreement with those by a higher-order BEM (boundary element method) model. Comparisons between present results and experimental results in literature and results by Froude-Krylov theory are conducted. The variation of wave forces and moments with different parameters are presented. This study not only gives a new analytical approach to wave diffraction by truncated cylinders but also provides a reliable benchmark for numerical investigations of wave diffraction by structures.

• Steel and Composite Structures
• /
• v.18 no.5
• /
• pp.1259-1277
• /
• 2015

The present study is focused on the behavior and design of perforated steel storage rack columns under axial compression. These columns may exhibit different types of behavior and levels of strength owing to their peculiar features including their complex cross-section forms and perforations along the member. In the present codes of practice, the design of these columns is carried out using analytical formulas which are supported by experimental tests described in the relevant code document. Recently proposed analytical approaches are used to estimate the load carrying capacity of axially compressed steel storage rack columns. Experimental and numerical studies were carried out to verify the proposed approaches. The experimental study includes compression tests done on members of different lengths, but of the same cross-section. A comparison between the analytical and the experimental results is presented to identify the accuracy of the recently proposed analytical approaches. The proposed approach includes modifications in the Direct Strength Method to include the effects of perforations (the so-called reduced thickness approach). CUFSM and CUTWP software programs are used to calculate the elastic buckling parameters of the studied members. Results from experimental and analytical studies compared very well. This indicates the validity of the recently proposed approaches for predicting the ultimate strength of steel storage rack columns.

• Steel and Composite Structures
• /
• v.43 no.5
• /
• pp.565-579
• /
• 2022

This study investigated the yielding capacity and performance of seismic dampers constructed with steel ring plates using numerical and analytical approaches. This study aims to provide an analytical relationship for estimating the yielding capacity and initial stiffness of steel ring dampers. Using plastic analysis and considering the mechanism of plastic hinge formation, a relation has been obtained for estimating the yielding capacity of steel ring dampers. Extensive parametric studies have been carried out using a nonlinear finite element method to examine the accuracy of the obtained analytical relationships. The parametric studies include investigating the influence of the length, thickness, and diameter of the ring of steel ring dampers. To this end, comprehensive verification studies are performed by comparing the numerical predictions with several reported experimental results to demonstrate the numerical method's reliability and accuracy. Comparison is made between the hysteresis curves, and failure modes predicted numerically or obtained/observed experimentally. Good agreement is observed between the numerical simulations and the analytical predictions for the yielding force and initial stiffness. The difference between the numerical models' ultimate tensile and compressive capacities was observed that average of about 22%, which stems from the performance of the ring-dampers in the tensile and compression zones. The results show that the steel ring-dampers are exhibited high energy dissipation capacity and ductility. The ductility parameters for steel ring-damper between values were 7.5 to 4.1.

• Culinary science and hospitality research
• /
• v.13 no.4
• /
• pp.31-44
• /
• 2007

The verified results of this study on the selected study assignments are as follows: Brand awareness of the western-style family restaurants in both study assignment One and Two is examined by showing and comparing the restaurants ranked from first to third. The ranking is based on the survey response rate only. And the familiarity of family restaurants' logos is investigated by statistical techniques such as T-test Anova, Duncan's Multiple Range Test, etc. Firstly, the analytical result of study assignment One shows that the brand awareness of the family restaurants can vary depending on how often customers use the restaurants. Secondly, the analytical result of study assignment Two shows that the familiarity and the preference of the restaurants ranked from first to third are identical each other depending on customers' sex, marital status, and income. Besides, the result shows that the brand awareness shows different rankings depending on customers' age, educational background, and occupation. Thirdly, the analytical result of study assignment Three indicates that the familiarity is different depending on customers' age, educational background, occupation, and annual income.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.194-203
• /
• 1993

Quality Control programs for industrial hygiene laboratory have successfully been operated since the 1st round was initiated in April 1992. Three rounds have been completed. Overall analytical performance of participants was improved through a subsquent round. The first round had a large variation among analytical results of all participants, 26.34%~504.22% of coefficient of variation. But the variation of analytical performance in the 2nd and 3rd rounds decreased to 40.42%~52.55% and 10.74%~20.98%, respectively. The difference of analytical performance among participants was decreased by operation of subsquent round. By distribution of Running Performance Index (RPI), over 50% of participants belongs to Category 3 in the first round. The average percentage of participants assigned to Category 3 in the 2nd and 3rd round was decreased to 37.2%. A definite analytical performance improvement of participants seems to be obtained. "A" and "B" group have more participants assigned to Category 3 than those of "C" group through the distribution of RPI by group divided to similar participant. By the distribution of RPI all participants, the percent of participant being over 200 RPI in the 1st round was 43%~52%, but decreased to 9%~29% and 9%~27%, in the 2nd and 3rd round, respectively. These results mentioned above indicate that the analytical performance of all participants have been improved by subsquent Quality Control Program although newcomers joined and a few participants droped out. But, there are some participants with poor analytical performance. Industrial Health Research Institute (IHRI) will offer service such as education, communication and visitation to them, and improve quality of their analytical performance in the future.

• Journal of Environmental Health Sciences
• /
• v.35 no.5
• /
• pp.402-410
• /
• 2009

This study was carried out to examine the optimal analytical method for determination of urinary toxic arsenic (inorganic arsenic and its metabolites) by HG-AAS (hydride generation-atomic absorption spectrometry). In the analysis of SRMs (standard reference materials), method E (addition of 0.4% L-cysteine to pre-reductant and use 0.04M HCl as carrier acid) showed the most accurate results compared with the reference values. In the analysis of 30 urinary samples, analytical results were significantly different depend on the component of pre-reductant and the concentration of carrier acid. When the concentration of carrier acid was higher, the analytical result was lower. The recovery rates of MMA (monomethylarsonic acid) and DMA (dimethylarsenic acid) were varied by the concentration of pre-treatment acid and carrier acid and hydride generation reagents. When the concentration of carrier acid was 1.62 M (5% HCl), the recovery rates of DMA was 1%. The recovery rates of MMA and DMA in method E (=V) were 102% and 100%, respectively. The results of this study suggest that the component and concentration of pre-reductant and carrier acid must be carefully adjusted in the analysis of urinary arsenic, and method E is recommendable as the most precise analytical method for determination of urinary toxic arsenic.

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.160-167
• /
• 2015

This study aims to develop a new analytical method to detect zinc pyrithione, the ingredient of cosmetics appointed as restricted ingredients and used as preservatives.. The analytical method was based on data gathered from the relevant literature. Information about the amounts of these ingredients was researched in order to select the base-matrix materials used to validate the analytical method. After selecting and preparing the base-matrix materials, the analytical method was validated by method validation procedures. The analytical method was verified first by inter-laboratory validation and then through analyzing the cosmetics sold in the market. Based on the results of this study, guidelines are proposed for the analysis of restricted ingredients in cosmetics, which will provide a method to test the cosmetics circulating in the Korean market. The use of the proposed guidelines will increase the quality of the cosmetics as well as the safety of human health, which will enhance the competitiveness of the Korean cosmetics industry and lead to an increase in the exportation of cosmetics.

• Environmental Analysis Health and Toxicology
• /
• v.17 no.2
• /
• pp.95-107
• /
• 2002

This study was designed to investigate the characteristics of atmospheric concentrations of toxic volatile organic compounds (VOCs) in Korea. Target compounds included 1,3-butadiene, aromatics such as BTEX, and a number of carbonyl compounds. In this paper, as the first part of the study, the performance of sampling and analytical methods was evaluated for the measurement of selected VOCs and carbonyl compounds in the ambient air. VOCs were determined by the adsorbent tube sampling and automatic thermal desorption coupled with GC/MSD analysis, while carbonyls by the DNPH-silica cartridge sampling with HPLC analysis. The methodology was investigated with a wide range of performance criteria such as repeatability, linearity. lower detection limits, collection efficiency, thermal conditioning, breakthrough volume and calibration methods using internal standards. In addition, the sampling and analytical methods established in this study were applied to real field samples duplicately collected in various ambient environments. Precisions for the duplicate samples appeared to be comparable with the performance criteria recommended by USEPA TO-17. The overall precision of the sampling and analytical methods was estimated to be within 20 ∼ 30% for major aromatic VOCs such as BTEX, whereas the precision for major carbonyl compounds such as formaldehyde and acetaldehyde was within 10 ∼ 20% for field samples. This study demonstrated that the adsorbent sampling and thermal desorption method can be reliably applied for the measurement of BTEX in ppb levels frequently occurred in common indoor and ambient environments.

• Advances in aircraft and spacecraft science
• /
• v.5 no.3
• /
• pp.335-348
• /
• 2018

The structural dynamics (SD) behavior of Elastic Flapping Wings (EFWs) is investigated analytically as a novel approach in EFWs analysis. In this regard an analytical SD solution of EFW undergoing a prescribed rigid body motion is initially derived, where the governing equations are expressed in modal space. The inertial forces are also analytically computed utilizing the actuator induced acceleration effects on the wing structure, while due to importance of analytical solution the linearity assumption is also considered. The formulated initial-value problem is solved analytically to study the EFW structural responses, where the effect of structure-actuator frequency ratio, structure-flapping frequency ratio as well as the structure damping ratio on the EFW pick amplitude is analyzed. A case study is also simulated in which the wing is modeled as an elastic beam with shell elements undergoing a prescribed sinusoidal motion. The corresponding EFW transient and steady response in on-off servo behavior is investigated. This study provides a conceptual understanding for the overall EFW SD behavior in the presence of inertial forces plus the servo dynamics effects. In addition to the substantial analytical results, the study paves a new mathematical way to better understanding the complex role of SD in dynamic EFWs behavior. Specifically, similar mathematical formulations can be carried out to investigate the effect of aerodynamics and/or gravity.