• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.3286-3297
• /
• 2024

Traditional text-based system engineering, which has been used in the design and application of passive residual heat removal system (PRHRS) for lead-cooled fast reactors, is prone to several problems such as low development efficiency, long iteration cycles, and model ambiguity. This study aims to effectively address the abovementioned problems by adopting a model-based system engineering (MBSE) method, which has been preliminarily applied to meet the design requirements of a PRHRS. The design process has been implemented based on the preliminary design of the system architecture and consists of three stages: top-level requirement analysis, functional requirements analysis, and design requirements synthesis. The results of the top-level requirements analysis and the corresponding use case diagram can determine the requirements, top-level use cases, and scenario flow of the system. During the functional requirements analysis, the sequence, activity, and state machine diagrams are used to develop the system function model and provide early confirmation. By comparing these sequence diagrams, the requirements for omissions and inconsistencies can be effectively checked. In the design requirements synthesis stage, the Analytic Hierarchy Process is used to conduct preliminary trade-off calculations on the system architecture, after which a white box model is established during the system architecture design. Through these two steps, the analysis and design of the system architecture are ultimately achieved. The resulting system architecture ensures the consistency of the design requirements. Ultimately, a functional hazard analysis was conducted for a specific incident to validate case requirements and further refine the system architecture. Future research can further reduce the design risk, improve the design efficiency, and provide a practical reference for the design and optimization of PRHRS in digital lead-cooled fast reactors.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1792-1802
• /
• 1996

The analysis of prepositional phrases in English-to Korean machine translation has problem on the PP-attachment resolution, semantic analysis, and acquisition of information. This paper presents an analysis system for prepositional phrases, which solves the problem. The analysis system consists of the PP-attachment resolution hybrid system, semantic analysis system, and semantic feature generator that automatically generates input information. It provides objectiveness in analyzing prepositional phrases with the automatic generation of semantic features. The semantic analysis system enables to generate natural Korean expressions through selection semantic roles of prepositional phrases. The PP-attachment resolution hybrid system has the merit of the rule-based and neural network-based method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.3
• /
• pp.371-378
• /
• 2016

The most important things in real-time systems are that a system guarantees to meet its deadline and to operate in its predictable range. When we design a real-time system, we need to verify whether the system can meet its deadline through schedulability analysis. There are several kinds of schedulability analysis technique for fixed priority scheduling systems. But as we all know, we can't perform schedulability analysis in design time because we can't estimate upper bounds on execution time of each task. So we used a similar real-time system to estimate upper bounds on execution time for our system, and then we performed schedulability analysis and verified that our system designed can meet its deadline.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.21-30
• /
• 2001

The analysis system implementing a serial process from structural vibration to sound radiation has been developed using both the power flow finite element method (PFFEM) known as a new vibrational analysis technique in medium to high frequency ranges and the acoustic boundary element method (BEM) which is effective in analyzing the sound radiation problems. The vibration analysis for arbitrary shape structures composed of plates is performed, and using the vibration energy density obtained from this analysis as the velocity boundary conditions for an acoustic analysis, vibro-acoustic analysis has been processed. To verify the developed system, we select a simple structure model and compare the results of developed system with those of SYSNOISE, and also the developed system is applied for the vibro-acoustic analysis of various structures in shapes.

• The Journal of Korean Medicine
• /
• v.31 no.5
• /
• pp.103-111
• /
• 2010

Objectives: Because of the characteristics of traditional Korean medicine, there are few overseas patents and SCI papers. Researchers are struggling to analyze the research trend using existing patent analysis system and paper analysis system. We aim to build up a web-based paper map analysis system for Traditional Korean Medicine to improve the situation. Methods: We studied the following three sub topics. First, we surveyed the research trend analysis method for traditional Korean medicine. Second, we designed a paper map analysis model and made the algorithm for it. Finally, the development of the paper map analysis system was conducted. Results: We developed a web-based paper map analysis system which has the three main functions being analysis chart, topology map and contour map. For the rich internet application, we used the flex development tool and java integrated development environment. Conclusion: We will provide our paper map analysis system in the OASIS through the minor changes to provide easy use. We hope that this system will be a useful tool to analyze the research trends for traditional Korean medicine.

• KEPCO Journal on Electric Power and Energy
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2017

After $SF_6$, which is being used in power equipment as an insulating material, is classified as one of the 6 major greenhouse gases, the maintenance and the refinement of used $SF_6$ started to get attention. In regard to this, KEPCO Research Institute (KEPRI) is developing $SF_6$ recovery and refinement technology starting with establishing a comprehensive $SF_6$ analysis system. With the analysis system, qualitative and quantitative analyses of the purity and the impurities of $SF_6$ before and after recovery, and before and after refinement have been carried out. The analysis system is comprised of GC-DID (Gas Chromatograph -Discharge Ionization Detector) for trace impurities analysis, GC-TCD (Thermal Conductivity Detector) for analyses of $SF_6$ purity and major impurities concentration from several hundred ppm up to percent range, GC-MSD (Mass Selective Detector) for analyses of impurities not included in standard gas, FT-IR (Fourier Transform-Infrared) Spectrometer for analysis of HF and $SO_2$, and moisture analyzer for analysis of moisture below 100 ppm. With this analysis system, complete analysis method of $SF_6$ has been established. This analysis system is being used in the maintenance of power equipment and the development of $SF_6$ recovery and refinement technologies. In this paper, the analysis results of four samples - gas and liquid phase $SF_6$ samples from a $SF_6$ refinement system before and after refinement are presented.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.699-709
• /
• 1999

This paper is aimed at defining items of analysis using SNMP MIB-II for the purpose of managing the Internet based network running on TCP/IP protocol, and then utilize these items, in conjunction with various Web technology and JAVA to design and implement a Web based interface of a management system to analyze the performance and status of the Internet. Among the required items in order to accomplish this task are utilization, interface packet transmission rate, I/O traffic ratio, and so on. Based on these items, the actual analysis is carried out by the Web interface according to the type of analysis. For instance, the interface executes the function of real-time analysis, collection processing, elementary analysis and detailed analysis. The demand of the user is fed into the Web interface which carried out a real-time analysis with the client system which in turn will eventually produce the results of the analysis. In order words, the interface acts as a mediator server for the analysis system. Furthermore, a protocol for exchange of data and messages between the server and the analysis system, the MATP protocol, was also designed. Finally, the results obtained through the system presented in this paper were displayed on screen according to the type of analysis. The system realized in this paper uses We technology and is independent of platform and allows the user to determine the performance of Internet at his/her own host according to the selected items of analysis.

• Journal of the Korean Society of Visualization
• /
• v.8 no.2
• /
• pp.23-30
• /
• 2010

Regarding the aircrafts with a rotor blade system, the miniaturization of them is limited due to the rotor blade length and the tail rotor system. To miniaturize an aircraft, an equipment is required that increases thrust and also shortens the length of the rotor blade. The present study will conduct the flow analysis for miniaturizing the aircraft by applying a duct to the coaxial rotor blade system without tail rotor. First, the verification on the calculated results was conducted through the computational flow analysis on the coaxial rotor blade system without a duct. Then, the flow analysis for the coaxial rotor blade systems was performed including Ka-60 duct, Single duct, Twin duct, and Double duct, respectively. From the numerical results, the thrust coefficient appeared higher with the duct than without a duct for the coaxial rotor blade system. Especially, in the case of Double duct, the thrust was improved due to the increase of incoming flow and the extension of the wake area. These results will be used as the basic concepts for miniaturizing the aircraft with the rotor blade system. The flow analysis on the coaxial rotor blade system including the fuselage remains as a future work.

• Health Policy and Management
• /
• v.4 no.2
• /
• pp.111-125
• /
• 1994

In developing total hospital information system, large amount of time and expense are to be spent while its results are likely to lead itself to end-users' dissatisfaction. Some of the main complaints on the part of end-users come from insufficient consideration of end-users environment as well as inappropriate representation of their requirement in the system alalysis and design. This papre addresses some advantages of Essential Logical Modeling Process for better analysis and design, explaining by example the developmental process of the Patent Management and Accounting System for a tertiary care hospital. In the case, the Essential Model, suggested by McMenamin and Palmer, proved to be an effective tool for clear separation of analysis and design phase and for better communication among system developers and with end-users. The modeling process itself contributed to better program modularity as well, shown in a Structured Chart. Difficulties in learning how to identify' essential activities' for the modeling practice were experienced in the beginnins stage, which were, however, overcome by elaborating some heuristic guideling and by rdferring to necessary tools including State Transition Diagram, Control Flow Diagram, and so many. While full evaluation of the Essential Model usag remains to wait till the completion of the case project, its strengt in making clear distinction between analysis and design phase was enough to be attractive to system analysts. The model concepts are open to many further application fields, particularly such areas as business re engineering, process remodeling, office automation, and organizational restructuring.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.41-49
• /
• 2013

There is a wide variety of system and applications in the power system. However, they have compatibility issues because they use different data standard and communication method. With the introduction of the smart grid, power system has been grow and diversified. Therefore power system need to be compatible with each other and the interoperability between applications is increasingly important. Thus, the IEC established IEC61970 and CIM Standard data exchange model for interoperability and system integration. Server-Client system was constructed which using CIM HSDA(Part4), a standard communication model, presented in IEC 619710. Also, self-developed real-time voltage stability analysis application and contingency analysis application was used. CIM HSDA was used for data input and real-time analysis. Tolerance of result which is in the range of allowable derived by Perform real-time voltage stability and contingency analysis of Jeju power system, and then compare it's result with PSS/E result.