• Journal of Korean Foot and Ankle Society
• /
• v.28 no.1
• /
• pp.21-26
• /
• 2024

Purpose: Foot pressure measurement devices are used widely in clinical settings for plantar pressure assessments. Despite the availability of various devices, studies evaluating the inter-device reliability are limited. This study compared plantar pressure measurements obtained from HR Mat (Tekscan Inc.) and EMED-n50 (Novel GmbH). Materials and Methods: The study involved 38 healthy male volunteers. The participants were categorized into two groups based on the Meary's angle in standing foot lateral radiographs: those with normal feet (angles ranging from -4° to 4°) and those with mild flatfeet (angles from -8° to -15°). The static and dynamic plantar pressures of the participants were measured using HR Mat and EMED-n50. The reliability of the contact area and mean force was assessed using the interclass correlation coefficient (ICC). Furthermore, the differences in measurements between the two devices were examined, considering the presence of mild flatfoot. Results: The ICC values for the contact area and mean force ranged from 0.703 to 0.947, indicating good-to-excellent reliability across all areas. EMED-n50 tended to record higher contact areas than HR Mat. The mean force was significantly higher in the forefoot region when measured with EMED-n50, whereas, in the hindfoot region, this difference was observed only during static measurements with HR Mat. Participants with mild flatfeet exhibited significantly higher contact areas in the midfoot region for both devices, with no consistent differences in the other parameters. Conclusion: The contact area and mean force measurements of the HR Mat and EMED-n50 showed high reliability. On the other hand, EMED-n50 tended to record higher contact areas than HR Mat. In cases of mild flatfoot, an increase in contact area within the midfoot region was observed, but no consistent impact on the differences between the two devices was evident.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.131-142
• /
• 2024

The purpose of this study was to estimate the optimal stand density criteria for each growth stage of Chamaecyparis obtusa (Siebold & Zucc.) Endl. to achieve the timber production goal for cypress forests and develop an optimal silvicultural system for forest thinning. A relative yield index (Ry) value of 0.75, presented as a stand density management criterion index, was estimated by analyzing the relationship characteristics between the composition ratio and stand density of slender trees from 216 sample plots of the recruited cypress forests. The analysis of the feasibility of achieving each production target in the existing silvicultural system for C. obtusa revealed that the growth rate according to the parameters of forest land productivity, such as site index and thinning intensity according to the increase in age, was not properly reflected. In the thinning system for each timber production target analyzed in this study, 353 high-quality large hardwoods from 498.1 m³/ha, 703 high-quality medium hardwoods from 376.2 m³/ha, and 1,758 small-diameter hardwoods from 249.5 m³/ha could be harvested. Although the silvicultural system prepared on the basis of the results of this study cannot be uniformly applied according to various management goals, this study is meaningful in that it presents empirical reference standards based on the stand density management diagram that reflects the growth characteristics of cypress forests in South Korea.

• Journal of Korean Medicine Rehabilitation
• /
• v.34 no.1
• /
• pp.65-81
• /
• 2024

Objectives This study aimed to understand the general research trends, applicated disease, and methodology of transcutaneous/percutaneous vagus nerve stimulation, contemplating its clinical use in traditional Korean medicine and future research directions. Methods A scoping review was conducted following Arksey and O'Malley Framework Stage and adhering to the PRISMA extension for scoping reviews: checklist and explanation. Papers published until October 30, 2023, were investigated across 10 databases (PubMed, Embase, Scopus, Web of Science, China National Knowledge Infrastructure, Oriental Medicine Advanced Searching Integrated System, Korean Studies Information Service System, KMbase, Science ON, Research Information Sharing Service. The search terms used were 'Transcutaneous/Percutaneous vagus nerve stimulation'. Results Since 2021, the application of transcutaneous/percutaneous vagus nerve stimulation for musculoskeletal symptoms has been actively researched, predominantly in Asia (37%), Europe (37%), and North America (21%). All 19 papers were part of clinical studies. Chronic pain was noted that most applied disease, it also was found to potentially aid in acute post-surgical pain relief. Major assessment tools include not only simple pain metrics but also pain perception, vagal nerve tension, quality of life, and inflammatory markers. Most procedures were carried out through the ear, which offers a favorable site for therapeutic stimulation without notable side effects. And parameter analysis, frequencies typically ranged around 25 Hz to 30 Hz, while pulse widths were commonly set at 250 ㎲ or 300 ㎲. Conclusions Transcutaneous/percutaneous vagus nerve stimulation is easily accessible through acupuncture in Korean medicine. Therefore, if future studies establish parameters and clinical significance, it could be utilized as a therapeutic modality.

• Journal of the Korean Society of Radiology
• /
• v.85 no.2
• /
• pp.381-393
• /
• 2024

Purpose Metabolic abnormalities in hepatic encephalopathy (HE) cause brain edema or demyelinating disease, resulting in symmetric regional cerebral edema (SRCE) on MRI. This study aimed to investigate the usefulness of the clustering analysis of SRCE in predicting the development of brain failure. Materials and Methods MR findings and clinical data of 98 consecutive patients with HE were retrospectively analyzed. The correlation between the 12 regions of SRCE was calculated using the phi (φ) coefficient, and the pattern was classified using hierarchical clustering using the φ² distance measure and Ward's method. The classified patterns of SRCE were correlated with clinical parameters such as the model for end-stage liver disease (MELD) score and HE grade. Results Significant associations were found between 22 pairs of regions of interest, including the red nucleus and corpus callosum (φ = 0.81, p < 0.001), crus cerebri and red nucleus (φ = 0.72, p < 0.001), and red nucleus and dentate nucleus (φ = 0.66, p < 0.001). After hierarchical clustering, 24 cases were classified into Group I, 35 into Group II, and 39 into Group III. Group III had a higher MELD score (p = 0.04) and HE grade (p = 0.002) than Group I. Conclusion Our study demonstrates that the SRCE patterns can be useful in predicting hepatic preservation and the occurrence of cerebral failure in HE.

• Journal of the Korean Society of Radiology
• /
• v.85 no.1
• /
• pp.171-183
• /
• 2024

Purpose This study aimed to investigate which indirect parameters on preoperative MRI were the principal predictors of subscapularis tendon tears (STTs) requiring surgical repair. Materials and Methods Preoperative MRI scans of 86 patients were retrospectively reviewed for visual assessment of the STT, pathology of the long head of the biceps tendon (LHBT), posterior decentering (PD) of the humeral head, humeral rotation, fatty degeneration, and subscapularis muscle atrophy. To evaluate atrophy, visual grading using the anatomical line connecting the coracoid tip to the glenoid base, designated as the base-to-tip line (BTL), and thickness measurements were performed in the en-face view. Results Arthroscopically, 31 patients (36%) exhibited Lafosse type III or IV STT and underwent surgical repair. LHBT pathology (p = 0.002), PD of the humeral head (p = 0.012), fatty degeneration (p < 0.001), and BTL grade (p = 0.003) significantly correlated with STT. In the multivariate analysis, PD of the humeral head (p = 0.011, odds ratio [OR] = 5.14) and fatty degeneration (p = 0.046, OR = 2.81) were independent predictors of STT. Conclusion PD of the humeral head and fatty degeneration of the subscapularis can help to diagnose clinically significant STT. Interpretation of these findings may contribute to the planning of an optimal surgical strategy.

• Journal of the Korean Society of Radiology
• /
• v.84 no.3
• /
• pp.666-675
• /
• 2023

Purpose This study aimed to determine whether the attenuation coefficient (AC) from attenuation imaging (ATI) was correlated with visual US assessment in patients with hepatic steatosis. Moreover, it aimed to assess whether the patient's blood chemistry results and CT attenuation were correlated with AC. Materials and Methods Patients who underwent abdominal US with ATI between April 2018 and December 2018 were included in this study. Patients with chronic liver disease or cirrhosis were excluded. The correlation between AC and other parameters, such as visual US assessment, blood chemistry results, liver attenuation, and liver-to-spleen (L/S) ratio, were analyzed. AC values according to visual US assessment grades were compared using analysis of variance. Results A total of 161 patients were included in this study. The correlation coefficient between US assessment and AC was 0.814 (p < 0.001). The mean AC values for the normal, mild, moderate, and severe grades were 0.56, 0.66, 0.74, and 0.85, respectively (p < 0.001). Alanine aminotransferase levels were significantly correlated with AC (r = 0.317, p < 0.001). The correlation coefficients between liver attenuation and AC and between L/S ratio and AC were -0.702 and -0.626, respectively (p < 0.001). Conclusion Visual US assessment and AC showed a strong positive correlation with the discriminative value between the groups. Computed tomography attenuation and AC showed a strong negative correlation.

• The Korean Journal of Applied Statistics
• /
• v.37 no.3
• /
• pp.339-353
• /
• 2024

In cases where the response variable in proportional data is confined to a limited interval, a regression model based on the assumption of normality can yield inaccurate results due to issues such as asymmetry and heteroscedasticity. In such cases, the beta regression model can be considered as an alternative. This model reparametrizes the beta distribution in terms of mean and precision parameters, assuming that the response variable follows a beta distribution. This allows for easy consideration of heteroscedasticity in the data. In this paper, we therefore aim to analyze proportional data using the beta regression model in two empirical analyses. Specifically, we investigate the relationship between smoking rates and coffee consumption using data from the 6th National Health Survey, and examine the association between regional characteristics in the U.S. and cumulative mortality rates based on COVID-19 data. In each analysis, we apply the ordinary least squares regression model, the beta regression model, and the extended beta regression model to analyze the data and interpret the results with the selected optimal model. The results demonstrate the appropriateness of applying the beta regression model and its extended version in proportional data.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.83-91
• /
• 2024

We compared the reproductive performance, non-productive performance, and milk composition performance of two groups of lactating cows that were either rice straw or tall fescue. We also compared and analyzed these parameters after the first parturition during the breeding period. The calving interval, artificial insemination, and duration from calving to conception were longer in the rice straw group than in the tall fescue group. The 305-day and peak milk yields were significantly higher in the tall fescue group than in the rice straw group (p<0.01). Milk fat content was significantly higher in the tall fescue group than in the rice straw group (p<0.001), but milk protein content was the same between the feeding groups. The difference in raw milk sales income between rice straw and tall fescue groups tended to increase as the number of lactations increased, but there was no effect of reduced feed costs. Analysis of the milk production and raw milk sales income of the surveyed farms revealed that the average milk production per head was significantly (p<0.05) higher in the tall fescue group than in the rice straw group, and raw milk sales income showed a similar tendency. Overall, these results provide important details to be considered when selecting feed as a way to reduce milk production and heifer raising costs. However, there remains a need for future follow-up studies exploring the relationship between feed choice and the management of heifers.

• Journal of Cardiovascular Imaging
• /
• v.30 no.4
• /
• pp.263-275
• /
• 2022

BACKGROUND: Cardiac allograft vasculopathy (CAV) is a complication beyond the first-year post-heart transplantation (HTx). We aimed to test the utility of cardiac magnetic resonance (CMR) to detect functional/structural changes in HTx recipients with CAV. METHODS: Seventy-seven prospectively recruited HTx recipients beyond the first-year post-HTx and 18 healthy controls underwent CMR, including cine imaging of ventricular function and T1- and T2-mapping to assess myocardial tissue changes. Data analysis included quantification of global cardiac function and regional T2, T1 and extracellular volume based on the 16-segment model. International Society for Heart and Lung Transplantation criteria was used to adjudicate CAV grade (0-3) based on coronary angiography. RESULTS: The majority of HTx recipients (73%) presented with CAV (1: n = 42, 2/3: n = 14, 0: n = 21). Global and segmental T2 (49.5 ± 3.4 ms vs 50.6 ± 3.4 ms, p < 0.001;16/16 segments) were significantly elevated in CAV-0 compared to controls. When comparing CAV-2/3 to CAV-1, global and segmental T2 were significantly increased (53.6 ± 3.2 ms vs. 50.6 ± 2.9 ms, p < 0.001; 16/16 segments) and left ventricular ejection fraction was significantly decreased (54 ± 9% vs. 59 ± 9%, p < 0.05). No global, structural, or functional differences were seen between CAV-0 and CAV-1. CONCLUSIONS: Transplanted hearts display functional and structural alteration compared to native hearts, even in those without evidence of macrovasculopathy (CAV-0). In addition, CMR tissue parameters were sensitive to changes in CAV-1 vs. 2/3 (mild vs. moderate/severe). Further studies are warranted to evaluate the diagnostic value of CMR for the detection and classification of CAV.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.4
• /
• pp.447-458
• /
• 2024

This study investigates the effectiveness of Building Information Modeling(BIM) software, specifically SketchUp and Revit, in reducing errors during quantity take-off(QTO) for complex building elements. While 3D modeling offers advantages, existing software may not fully account for manufacturing discrepancies, such as variations in concrete cover thickness and reinforcing bar radius. To address this limitation, this research proposes a BIM-based QTO method for high-insulation wall panels with intricate details. The method utilizes a BIM family library, focusing on key parameters like concrete cover thickness and inner radius of shear reinforcement. A case study compared the cross-sectional details of a wall panel modeled in Revit with the actual manufactured specimen. The analysis revealed a 12% reduction in modeled concrete cover thickness and a 1.27 times larger modeled inner radius of the shear bar compared to the real-world values. The proposed method incorporates these manufacturing variations into the Revit model of the high-insulation wall panel. Software like Navisworks facilitates the identification and correction of any material interferences arising from these adjustments. Furthermore, the method employs a unit wall concept(1m²) to account for the volume of various materials, including insulation and splice sleeves at joints. This allows for the identification of a similar existing family within the BIM library(e.g., "Double RC wall with embedded insulation") that reflects the actual material quantities used in the wall panel. By incorporating these manufacturing-induced variations, the proposed method offers a more accurate QTO process for complex high-insulation wall panels. The "Double RC wall with embedded insulation" family within the Revit program serves as a valuable tool for material quantity estimation in such scenarios.