• Korean Journal of Applied Biomechanics
• /
• v.23 no.3
• /
• pp.209-218
• /
• 2013

This study was to perform the kinetic analysis of forward $1\frac{1}{2}$ somersault on the platform diving. Six men's diving players of the Korea national reserve athletes participated in this study. The variables were analyzed response time, velocity, center of mass (COM), angle, center of pressure (COP) and ground reaction force (GRF) of motion. For measure and analysis of this study, used to synchronized to 4 camcorder and 1 force plate, used to the Kwon3D XP (Ver. 4.0, Visol, Korea) and Kwon GRF (Ver. 2.0, Visol, Korea) for analyzed of variables. The results were as follows; Time factor were observed in maximum knee flexion depending on the extent of use at phase 1 of take-off to execute the somersault. This enabled the subject to secure the highest possible body position in space at the moment of jumping to execute the somersault and prepare for the entry into the water with more ease. Regarding the displacement of COM, all subjects showed rightward movement in the lateral displacement during technical execution. Changes in forward and downward movements were observed in the horizontal and vertical displacements, respectively. In terms of angular shift, the shoulder joint angle tended to decrease on average, and the elbow joints showed gradually increasing angles. This finding can be explained by the shift of the coordinate points of body segments around the rotational axis in order to execute the half-bending movement that can be implemented by pulling the lower limb segments toward the trunk using the upper limb segments. The hip joint angles gradually decreased; this accelerated the rotational movement by narrowing the distance to the trunk. Movement-specific shifts in the COP occurred in the front of and vertical directions. Regarding the changes in GRF, which is influenced by the strong compressive load exerted by the supporting feet, efficient aerial movements were executed through a vertical jump, with no energy lost to the lateral GRF.

• Journal of the Korean Home Economics Association
• /
• v.41 no.8
• /
• pp.201-212
• /
• 2003

This study aims to improve the comfort and fit of womens swimsuits. Based on the results of the survey, trial suits were designed. In terms of the breast cap, there are five variations based on the feature, size, and thickness and two variations according to the connection mode of the cap. Total 17 trial swimsuits were made, ease of movement and wearing comfort were evaluated. The results of this study were as follows: 1. In terms of movement according to the type of breast cap, the round type shelved much less movement than the triangular type at the lower part of the cap. According to size, the cap that was manufactured on the basis of brassiere cup size showed much less movement than the ordinary cap size in the same round type of cap. In terms of the connection mode between breast caps and swimsuits, there was less cap movement when they were connected by power nets compared to the ordinary models which were connected by conventional rope. 2. Analysis of the differences in wearing comfort. The round type proved to be more convenient than the triangular type at the lower circumference of the caps, the power net collection was rated more positively by the respondents.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.721-733
• /
• 1994

Orthodontic tooth movement is closely related to the stress on the periodontal tissue. In this research the finite element method was used to observe the stress distribution and to find the best condition for effective tooth movement in the case of unilateral molar expansion. The author constructed the model of lower dental arch of average Korean adult and used $.032'\times.032'\times60mm$ TMA wire. The wire was deflected in the horizontal and vertical direction to give the 16 conditions. The following results were obtained ; 1. When the moment and force were controlled properly the movement of anchor tooth was minimized and the movement of moving tooth was maximized. 2. As the initial horizontal deflection increased the buccal displacement of both teeth was also increased. As the initial horizontal deflection increased the lingual movement of anchor tooth and the buccal movement of moving tooth increased. 3. When the initial horizontal and vertical deflection rate was 1.5 the effective movement of moving tooth was observed with minimal displacement of anchor tooth.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2015

PURPOSE: The aim of this study was to investigate the effects of distal movement on shoulder muscle activation during diagonal pattern of exercises. METHODS: Seventeen healthy male participants volunteered to participate. Five muscles of shoulder were investigated during standing performance of diagonal shoulder exercises with and without visual trace. Two patterns of the diagonal exercises were used as diagonal 1 flexion and extension (D1F-E), and diagonal 2 flexion and extension (D2F-E). Two way repeated measures analysis of variance was used, which the factor was the presence of distal movement and exercise variations. RESULTS: The average muscle activity values of the lower trapezius and anterior deltoid are higher with the D2F-E, compared to the D1F-E (p<.05). The distal movement effect was observed within included all muscles except the lower trapezius, which the values are significantly greater in exercise with distal movement (P<.05). All significant increase of the muscles during the exercise with distal movement condition showed over 0.9 for the observed power in present study. CONCLUSION: Present result suggested that the diagonal pattern of exercise with distal movement has additional advantages of activating the scapulothoracic muscle as well as glenohumeral muscles. In addition, the D2F-E exercise pattern is effective for activating lower trapezius and anterior deltoid muscles.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.3
• /
• pp.1-9
• /
• 2019

The Industrial Innovation Movement, based on win-win cooperation with SMEs, is a structure that enables suppliers who have struggled with corporate growth through productivity innovation due to poor manufacturing environment and lack of innovation. To this end, consultants and technical experts will support production innovation activities to improve production methods and improve productivity through process and management consulting. The purpose of this study was to explore the driving factors of the industrial innovation movement to improve the corporate ecosystem by improving the productivity of SMEs using modified IPA. The research results are as follows. First, in order to revitalize the Industrial Innovation Movement, the CEO-related elements of the participating companies should be maintained and strengthened. The motivation, education support, innovation organizational culture, the establishment of an innovation promotion system requires centralization of efforts for improvement. Second, in order to revitalize the Industrial Innovation Movement, the consultant's ability to analyze problems and suggest alternatives should be continuously strengthened. Third, in terms of the Central Promotion Headquarters, it was found that the Industrial Innovation Movement would be successful if the public information, industrial inspection for benchmarking, and provision of various information to support innovation activities were urgently improved.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.11
• /
• pp.5-16
• /
• 2008

Field monitoring data of nine sites were investigated to suggest an evaluation method on lateral movement of the quaywall on soft grounds. It was found that in order to evaluate the lateral movement of quaywalls with foundation piles such as the landing pier, the safety factor of slope should be applied with consideration of the stabilizing effect of the piles. If the required safety factor of slope is greater than 1.6 in slope stability analysis with consideration of the stabilizing effect of the piles, the quaywalls are considered to be safe against lateral movement. On the other hand, for the gravity-type quaywalls such as the caisson type quaywall, the required safety factor of slope should be greater than 1.3.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.1
• /
• pp.115-120
• /
• 2009

Single PPM Quality Innovation Movement is originally developed quality program in Korea for supplier's quality level-up since 1995. The quality target is below the 10ppm(parts per million) in outgoing quality and delivered goods plus field claim. This Single PPM Quality Innovation Movement program was conducted to realize the anticipated results not only due to management result level's increasing, but also the company's confidence and competitiveness. This study attempted to find the mutual influences on the participation of the constituent members, satisfaction of the constituent members and results of the management from Single PPM Quality Innovation Movement. The reliance analysis for the measurement material on the questionnaire was verified by Cronbach's alpha coefficient. Participation of the constituent members, satisfaction of the constituent member and result of the management, the influences upon Single PPM improvement degree level were verified through the structural analysis by using SPSS statistic package. The influence evaluation among the groups was evaluated by the structure equation.

• English Language & Literature Teaching
• /
• no.6
• /
• pp.143-157
• /
• 2000

It has been one of the puzzles in the English syntax that so called the rule of subject-auxiliary inversion (SAI) is not allowed in subject wh-movement while it is not obligatory in non-subject wh-movement in a root sentence. This asymmetry has been a puzzle since SAI itself was thought to be a part of question construction as we can observe from yes/no questions. The asymmetry gets more complicated in terms of sentence embedding, i.e no SAI is permitted in the embedded context in question. The goal of this paper is to suggest an unified analysis for this unsolved grammatical phenomena on the basis of Rizzi (1997)'s recent work. The main idea is that SAI is not a I-to-C movement but one of I-to-Focus where Focus is a functional category and its phrase is located between CP and IP. The other proposal is that Wh-movement is no more homogeneous in terms of landing site between a root and an embedded sentence: the target for a wh-phrase in the former is the Spec of FocP (Focus Phrase) but the one in the latter is the Spec of CP as the standard theory assumes. Pesetsky (l999)'s analysis is discussed and its theoretical and empirical shortages are pointed out. Its rather radical proposals such as the one that the nominative case is just an uninterpretable tense feature of DP and the other that 'that' is no longer a complementizer but an element of I(nflection) make it less acceptable in spite of the possibility that it can get rid of Case theory entirely, which would be ideal in the spirit of minimalism.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.99-105
• /
• 2014

This paper presents a new locomotion mode recognition method based on a transformed correlation feature analysis using an electromyography (EMG) pattern. Each movement is recognized using six weighted subcorrelation filters, which are applied to the correlation feature analysis through the use of six time-domain features. The proposed method has a high recognition rate because it reflects the importance of the different features according to the movements and thereby enables one to recognize real-time EMG patterns, owing to the rapid execution of the correlation feature analysis. The experiment results show that the discriminating power of the proposed method is 85.89% (${\pm}2.5$) when walking on a level surface, 96.47% (${\pm}0.9$) when going up stairs, and 96.37% (${\pm}1.3$) when going down stairs for given normal movement data. This makes its accuracy and stability better than that found for the principal component analysis and linear discriminant analysis methods.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.109-120
• /
• 2006

The purpose of this study was to examine the kinematical characteristics of gymnasts who can perform the KOVACS skill, and to grope for the better KOVACS Piked motion. The subjects were 3 male national gymnasts and were filmed with video cameras. And kinematic data were collected from the event of maximum knee flexion to the re-grasp the bar after airborne motion during KOVACS Piked motion. And the following conclusion were drawn; S1 took the enough time and inadequate height for performing KOVACS Piked motion. S2 showed the inadequate time and height during airborne motion with the large forward-backward and left-right movement. S3 showed the better KOVACS Piked movement among gymnasts, but the weak point of S3 was the large left-right shift. Based on the above conclusions, the gymnasts should be trained the enough time and height for the effective airborne movement and to reduce the left-right movement.