• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1610-1624
• /
• 1998

An axisymmetric jet is forced with two helical fundamental waves of identical frequency spinning in opposite directions and an additional axisymmetric sub harmonic wave. The subharmonic component rapidly grows downstream from subharmonic resonance with the fundamental, significantly depending on the initial phase difference. The variations of the subharmonic amplitude with the initial phase difference show cusp-like shapes. The amplification of the sub harmonic results in 'vortex pairing of helical modes'. Furthermore, azimuthal variation of the amplification induces an asymmetric jet cross-section. When the initial subharmonics is imposed with an initial phase difference close to a critical value, the jet-cross section evolves into a three-lobed shape. One lobe is generated by the enhanced vortex pairing and the other two lobes are generated by the delayed vortex pairing. Thus, it is confirmed that the initial phase difference between the fundamental and the subharmonic plays an important role in controlling the jet cross-section.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.619-627
• /
• 2005

An initial member sections of steel structures is selected by experience of expert building structural designers. And appropriate member section is designed by repeat calculation through structural analysis. Therefore an initial assumption of member section is necessary for saving the time for structural design and is important to acquire safety of building structures. Also brace damper are generally used to prevent or decrease structural damage by its hysteretic behavior in building structures subjected to strong earthquake. Based on plastic design, the initial section of members for architectural steel structures with brace hysteretic dampers is presented and seismic effect of structural behavior by the ratio of damper stiffness to structural story stiffness is estimated in this paper.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제18권4호
• /
• pp.293-304
• /
• 2011

The notions of an initial section and a special set in BH-algebras are defined and some of their properties are obtained. The notion of a complicated BH-algebra is introduced and some related properties are obtained. Finally, the notion of essences in BH-algebras are defined, and many properties are investigated.

• 소성∙가공
• /
• 제20권6호
• /
• pp.450-455
• /
• 2011

This paper presents an inverse design methodology for the cross section geometry of mold spring with a rectangular cross section as the starting material for a coiling process. The cross-sections of mold springs are universally rectangular, as the parallel sides minimize the possibility of failure under high service loads. Pre-coiled wires are initially designed to have a trapezoidal cross section, which becomes a rectangle by the coiling process. This study demonstrates a numerical exercise to predict changes in the sectional geometry in spring manufacture and to obtain the initial cross section which becomes the exact rectangle desired from the manufacturing process. Finite element analysis was carried out to calculate the sectional changes for various mold springs. Geometrical parameters were the widths at inner and outer radii, the inner and the outer corner radii, and the height. A partial least square regression analysis was carried out to find the main contributing factors for deciding initial design values. The height and the width mainly affected various initial parameters. The initial width at the inner radius was mostly affected by various specification parameters.

• 대한토목학회논문집
• /
• 제8권2호
• /
• pp.205-213
• /
• 1988

사장교는 그 설계에 있어서 케이블의 개수와 배치형식, 케이블의 초기인장력, 주탑의 지지형식과 높이 등 거어더와 주탑 단면외에도 설계변수가 많으므로 효율적인 설계를 하는 것이 쉽지 않다. 본 연구에서 케이블의 초기인장력, 거어더와 주탑의 단면, 주탑의 높이를 설계변수로 하여 사장교의 설계를 최적화하는 문제를 다루었다. 서로 상호작용을 하는 여러 설계변수를 동시에 최적화하는 어려움을 피하기 위하여 본 논문에서는 초기인장력, 단면, 주탑의 좌표를 각각 독립된 설계공간에서 최적화하였다. 목적함수로서는 초기인장력 공간에서는 전체구조의 변형에너지를, 단면 및 좌표의 공간에서는 재료의 총중량을 취하였다. 제약조건으로는 초기인장력의 상하한계, 부재의 좌굴을 고려한 응력, 단면적의 하한계를 고려하였다. 대표적인 Fan형 및 Harp형 사장교를 최적설계한 결과, 제시된 방법에 의하여 합리적인 결과를 얻을 수 있음을 보이고, 기존의 최적화에서 고려하지 않았던 좌표의 최적화를 통하여 경제성을 얻을 수 있다는 것을 밝혔다.

• 한국공간구조학회논문집
• /
• 제6권1호
• /
• pp.101-109
• /
• 2006

내진 댐퍼 브레이스를 가진 강구조물은 브레이스가 지진입력에너지를 충분히 흡수함으로써 주요한 구성부재의 치명적인 피해를 현저하게 저감시키는 것이 가능하므로, 이 시스템 도입에 따른 거동특성 파악 및 적용성에 대한 연구가 활발히 진행되고 있다. 내진 댐퍼 브레이스를 가진 강구조물의 설계에 있어서는 구조물에 대한 브레이스의 강성비를 결정하여야 하며, 내진성능이 우수한 구조물을 설계하기 위해서는 강성비에 따른 구조물의 지진응답 특성을 파악할 필요가 있다. 본 연구에서는 소성설계에 기초하여 내진 댐퍼 브레이스의 수평 강성비에 따른 강구조물의 초기 부재단면를 설계하고, 지진응답해석을 수행하여 초기 부재단면 설계의 타당성 검토 및 동적거동 특성을 파악한다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.674-682
• /
• 2017

This paper presents an optimal initial firing angle control based on the energy consumption and regenerative energy of a parallel multi-pulse thyristor dual converter for urban railway power substations. To prevent short circuiting the thyristor dual converter, a hysteresis band for maintaining a zero-current discontinuous section (ZCDS) is essential during mode changes. During conversion from the ZCDS to forward or reverse mode, the DC trolley voltage can be stabilized by selecting the optimal initial firing angle without an overshoot and slow response. However, the optimal initial firing angle is different depending on the line impedance of each converter. Therefore, the control algorithm for tracking the optimal initial firing angle is proposed to eliminate the overshoot and slow response of DC trolley voltage. Simulations and experiments show that the proposed algorithm yields the fastest DC voltage control performance in the transient state by tracking the optimal firing angle.

• 한국강구조학회 논문집
• /
• 제26권5호
• /
• pp.441-452
• /
• 2014

본 논문에서는 중력하중을 받는 SRC기둥과 합성보 접합부의 정적실험을 수행하였다. 합성보는 H형단면과 U형단면으로 구성되어 있다. 모두 5개의 실대형 실험체를 설계하여 실험변수, 즉, H형단면 크기, 스터드커넥터의 유무, 스티프너와 상부근의 유무 등이 접합부의 거동에 미치는 영향을 조사하였다. 또한 H형단면과 U형단면의 용접접합부의 구조성능을 초기강성, 내력 및 변형능력을 중심으로 기술하였다.

• 한국정밀공학회지
• /
• 제31권5호
• /
• pp.411-416
• /
• 2014

In this research we present design optimization methods for a vehicle-mounted satellite antenna positioner. Our initial antenna positioner was conservatively designed to satisfy a worst case scenario where wind blew across the positioner at the speed of 120 km/h. Investigating stresses and safety based on Finite Element Methods (FEM), we find reflector support frames can be optimized to significantly reduce the weight of the positioner system. Thus, we optimize the reflector support frame from the given initial design while considering weight, maximum stress, maximum allowable deflection, cross section, and thickness. As a result, Shape C and the thickness of 2 mm are determined for the cross section of the reflector support frame. Applying this result, the weight of the new antenna positioner is 57.343 kg, which is decreased by 10.74% compared to the initial conservative design.

• PNF and Movement
• /
• 제20권2호
• /
• pp.179-187
• /
• 2022

Purpose: The purpose of this study was to determine the asymmetrical difference between the use of leg muscles on the surgical and non-surgical sides during initial lower extremity ergometer exercise after unilateral knee arthroplasty. Methods: Twelve elderly patients diagnosed with degenerative arthritis of the knee and who underwent unilateral arthroplasty were included in this study. The leg length of each subject was taken into account when setting the application distance of the lower extremity ergometer. The same pedal resistance, strength, and speed were used for all the subjects. The total angle of use of the ergometer (360°) was analyzed by dividing it into an extension section and a flexion section. Using a surface electromyography system, the activities of the muscles of the surgical and non-surgical sides were converted into maximal voluntary isometric contraction (MVIC) and analyzed using the paired t-test. Results: When the activities of the muscles on the surgical and non-surgical sides were compared, it was found that the rectus femoris and biceps femoris had significant differences in the flexion and extension sections (p < .05), and that the tibialis anterior significantly differed in the flexion section (p < .05). There was no significant difference in the extension section of the tibialis anterior muscle, or in the flexion and extension sections of the gastrocnemius (p >.05). Conclusion: The results of this study confirm that the rectus femoris, tibialis anterior, biceps femoris, and gastrocnemius on the surgical side act in an opposite manner to those on the non-surgical side during pedaling in the same section.