• Journal of Environmental Health Sciences
• /
• v.33 no.4
• /
• pp.255-263
• /
• 2007

Indoor air quality is the dominant contributor to total personal exposure because most people spend a majority of their time indoors. The purposes of this study were to evaluate the alternative method for improvement of indoor air quality in house after coating titanium dioxide ($TiO_2$) photocatalyst for interior part of the house using nitrogen dioxide ($NO_2$) multiple measurements. To evaluate the alternative method in indoor environment, daily indoor and outdoor $NO_2$ concentrations of an apartment and a detached house were daily measured for consecutive 21 days in winter and summer, respectively, Another daily 21 measurements were carried out after $TiO_2$ coating on wall paper of interior part in houses. All $NO_2$ concentrations were measured by passive filter badges. Indoor air quality models using mass balance are useful tool to quantify the relationship between indoor air pollution levels, ambient concentrations, and explanatory variables. Using a mass balance model and linear regression analysis, penetration factor (ventilation rate divided by sum of ventilation rate and decay rate) and source strength factor (emission rate divided by sum of ventilation rate and decay rate) were calculated. Subsequently, the decay constants were estimated. In this study. magnitude of improvement of indoor air quality could be evaluated by decay constant.

• Journal of the Korean housing association
• /
• v.28 no.1
• /
• pp.109-117
• /
• 2017

It becomes increasingly important to develop sustainable housing to protect environment. The certification system for long-life housing was made to use houses for more than one hundred years in 2014. The long-life housing should be able to meet new demands by change of the population structure; low birthrate, aging and increase of single households. Therefore, it is necessary to suggest a prototype of long-life housing for partial rent. The objective of this study is to suggest a prototype for dividing housing in the long-life validation complex, which has design consideration for dividable house. The construction costs of a prototype for dividing housing is evaluated by comparing with other prototype without regard to dividing housing. The results were as follows: (1) The prototype for diving housing should be added an entrance, bathroom, kitchen for tenant, and above all, maintenance fees for tenant have to be managed seperately from house owner. (2) The equipment system for dividing housing should be designed when planning the space of house. However, design for diving housing should be reflected the unit plan at a minimum on what will and will not happen.

• Land and Housing Review
• /
• v.11 no.3
• /
• pp.1-9
• /
• 2020

This study fulfills an empirical analysis how the physical factors affect the formation of housing price with the block unit. Block unit houses are a type of housing that pursues comfort and convenience in that the characteristics of individual houses and apartment houses are mixed. Existing studies have focused only on the physical characteristics of various planning elements such as block-type residential complexes. Nevertheless, it is not known whether the physical characteristics of block-type residential complexes reflect the preferences of actual consumers. In addition, there are no sufficient studies on how to evaluate them from the market side. In this study, block-level detached housing sites the target complexes with 10 or more households built between 2002 and 2019. The target areas for analysis are 163 complexes in Paju, Namyangju, Goyang, Suwon, Yongin, Ansan, Gimpo, Incheon, Seongnam, Hwaseong and Gwangju, Gyeonggi-do. The physical elements that make up the unit housing were classified through factor analysis. Finally, regression analysis was conducted to establish the basis determining the price-forming factors. As a result of the analysis, the factors that influenced the price were the site area and the number of community facilities. The variable with negative influence was the distance from Seoul. Based on the results of this study, it can be said that the influence on price formation in various areas was confirmed by presenting the relationship between the facility composition and price of a detached house.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.521-530
• /
• 2009

This study has been made to execute a research in order to lead the improvement of indoor air quality, examining the indoor ventilation characteristics by using a numerical analysis method. To this end an extensive parametric investigation are made according to various external flow variables such as main wind direction and wind speed by season, building layout design, and location of ventilators, etc. in Daedeok Techno Valley, one of large-scaled apartment in Daejeon. It is observed there was a significant difference of main wind direction between summer and winter. The main wind direction in summer was a south wind, and on the contrary the direction in winter is northnorthwest, which is similar to the average main wind direction for 10 years. One of the important calculation results is that the change of wind direction causes a significant effect on the apartment ventilation by the change of pressure difference around each complex of apartment. In case of favorable area of ventilation, the indoor ventilation rate can meet 0.7 ACH from the standard value only with natural ventilation. On the contrary, in other area the value was much lower than the standard value. If the calculation result applies to the design of layout apartment or placement of ventilators, it will be greatly helpful to the energy saving because it can be parallel with the natural ventilation to help securing ventilation rate, not much depending on the mechanical ventilation.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.995-998
• /
• 2007

The number of households old over as much as 20 years is expected to get increased rapidly more than 1,000,000(1 million). As a measure to this fact remodeling is being revitalized over the country. parking lots expansion actually takes up a great deal of weight among the requirement for remodeling. When constructing a parking lot for enlargement, the way of going into the main building determines such construction features as selection of Retaining Wall Method, installation of an elevator, parking measure of capacity, etc. This study derived the affecting factors for selecting the way of going into the main building when constructing an underground parking lot. In a research way, we examined the features on each method of going into the main building in an apartment complex through an in-depth interview with some experts after investigating the method of enlarging an underground parking lot and going into the main building. After that, we derived the affecting factors for selecting the way of going into the main building. The affecting factors include constructability, convenience, economic efficiency as a high level as well as existence and nonexistence of basement and removal, safety of current building, parking measure of capacity, amenity, inhabitant traffic line, construction expenses and construction duration as a low one. This study will be applied as a reference for selecting the way of going into the main building when constructing an underground parking lot especially targetted on an old apartment house.

• Fire Science and Engineering
• /
• v.34 no.4
• /
• pp.78-86
• /
• 2020

In this study, numerical simulations were performed on the air egress velocity of pressurization systems in an ancillary room when a fire occurred in an apartment house. The relationship between the air supply flow rate of a damper and air egress velocity at a fire door is predicted to be linear. Additionally, a minimum flow rate of the damper, which meets national fire safety standards for air egress velocity, i.e., 0.7 m/s can be estimated. Air egress velocity at the fire door is analyzed according to the supply air direction and installation height of the damper. When the damper has an upward supply air direction and is installed at a high level, the egress velocity at the top section of the fire door is larger, whereas the soot concentration at the ancillary room is lower than when the supply direction of the damper is downward. Therefore, it is found that increasing the air egress velocity at the top section of the fire door helps to efficiently prevent the inflow of smoke.

• Convergence Security Journal
• /
• v.10 no.2
• /
• pp.37-41
• /
• 2010

The object of this paper is to design a embedded system based on sensor networks. The proposed system can manage the heating by sensing and analyzing the temperature and humidity in apartment house and others. For implementing this system, we devide JAVA API into the platform-independent JAVA part and platform-dependent native part for the implementation of JAVA API to manage the linux based embedded system devices, and focus on the control of the embedded system devices using JAVA API.

• Journal of the Korea Institute of Building Construction
• /
• v.5 no.4 s.18
• /
• pp.153-164
• /
• 2005

This study aims at establishing JIT production management system to enable manage the resources input into from procurement through construction based on correct identification of the process, an analysis on the amount of input materials and information sharing. This study has focused on the process control and working process of rebar work in domestic apartment house construction where the overall scope of Process from the planning phase to the construction phase has been analyzed in this study. Also construction phase was selected for the application of a sample case. A basic model for JIT production was generated with these processes. Furthermore A questionnaire and the on-site survey with process, checklist and control data were prepared and performed for the application of JIT production management model into rebar work. The governing scopes of JIT production management system include process management, material management, yard loading and moving management and inventory control, and the operation of each control item

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.21-24
• /
• 2005

In this paper, field application of mass concrete using setting time difference of super retarding agent is reported to reduce hydration heat of concrete placed at newly constructed apartment house in Daejeon. Horizontal placing lift is applied. According to test results,: slump and air content meets the requirement of target values. For compressive strength, it exceeds the nominal strength ordered by the costumer. For temperature history, maximum temperature of center at top section shows $25.6^{\circ}C$, and at bottom section, $35.4^{\circ}C$. According to naked eye's investigation, no hydration heat crack is observed at the surface of concrete.

• Journal of the Korean housing association
• /
• v.16 no.2
• /
• pp.11-17
• /
• 2005

The purpose of this study is to find the characteristics of planning factors to the outdoor space of the olympic village munchen. The result of the research are follows; 1) The horizontal gardens of the low buildings and hanging gardens on the terraces of the high-rise buildings are intended as a continuation of the concept of the modelled landscape. 2) By virtue of the choice of the type of building and the way in which the buildings are staggered, the residents have an unimpaired view of the green spaces and recreation areas. 3) Leisure value is further enhanced by the proximity of the residential arms to the footpath running north to south. 4) The terraces allow the residents to enjoy more sun and sky, so that the view into the distance is the rule. 5) To improve orientation, the pedestrian paths to the residential wings are also situated directly over the underground vehicle-access roads.