• Journal of Radiation Industry
• /
• v.6 no.1
• /
• pp.49-54
• /
• 2012

Various anion exchange membranes were prepared by radiation graft copolymerization of vinylbenzyl chloride onto fluorinated films and subsequent quaternization with various tertiary amines such as trimethylamine, N,N-dimethylbuthylamine, N,N-dimethylaniline, and N-methylpiperidine. The quaternizations of the anion exchange membranes were confirmed by measuring of the ion exchange capacities of the membranes. The mechanical properties and the water uptakes were also measured. The elongation at break was found to be largely dependent on the fluorinated film, the quateranry ammonium, and the degree of grafting. The results indicate that the poly (ethylene-alt-tetrafluoroethylene) with quaternized trimethylamine moiety exhibits higher flexible property compared to the other prepared anion exchange membranes.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.1
• /
• pp.42-53
• /
• 1999

A study on the synthesis of zeolite from coal fly ash from power plant was carried out to reduce environmental problems and reuse industrial waste. The synthesized zeolite was proved to be Zeolite 4A type by means of the XRD and SEM analysis, and then the synthesized zeolite was used as an absorbent to remove the $NH_4^+$ ions in the wastewater and water. In the ion exchange of single $NH_4^+$ ions by the natural zeolite and the synthesized zeolite, the ion exchange reached equilibrium within 10 min. and 1hr, respectively. The amount of ion exchanged $NH_4^+$ to the unit weight of natural zeolite and zeolite 4A were 1.09 and 3.54 meq/g respectively, and the amount of $NH_4$ ion exchanged by the synthesized zeolite was higher than by the natural zeolite. The ion exchange kinetics fitted very well to the Feundlich and Langmuir isotherm. The effects of coexisting cations on the ion-exchange properties of zeolites were studied in order to apply them to water treatment. In the bisolute-system of the $NH_4^+-K^+$ and $NH_4^+-Na^+$ systems, the ion exchange capacity was smaller than the single $NH_4^+$ ion system. The effects of coexisting cations on the ion exchange system by the natural zeolite and the synthesized zeolite were found to be $K^+>Na^+$ and $Na^+>K^+>>Mg^{2+}>Ca^{2+}$, respectively.

• Journal of Biosystems Engineering
• /
• v.32 no.5
• /
• pp.348-353
• /
• 2007

A solid state ion sensor module has been developed and evaluated for hydroponic nutrients analysis. The sensor module consisted of five ion-selective electrodes (ISE) fabricated by screen-printing technology. The electrochemical responses of ion sensors for nitrate, ammonium, potassium, calcium, and pH were measured with specially designed 7-channel low voltage signal transducers. The analytical characteristics of the sensors were comparable with those of conventional ISE sensors. The solid state ion sensors exhibit linear relationships over five concentration decades. Detection limit of the sensors were $5.6{\times}10^{-5}{\sim}1.6{\times}10^{-7}M$ depends on ions. Performance test results showed that relative errors of measured ion concentrations were less than 5% for $NO_3{^-},\;K^+,\;Ca^{2+}$ ion, and pH. The concentration of $NO_3{^-},\;NH_4{^+},\;K^+,\;Ca^{2+}$, and pH ion in standard solution and nutrient solutions could be determined by direct potentiometric measurements without any conditioning before measurements.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.10
• /
• pp.1381-1391
• /
• 2002

The solvent sublation using ion pairs of metal-2-naphthoate(2-HNph) and tetrabutyl ammonium ($TBA^+$) ion has been studied for the concentration and determination of ultra trace Bi(III), In(III) and Tl(Ⅲ) ions in water samples. The partition coefficients ($K_p$) and the extraction percentages of 2-HNph and the ion pairs to methyl isobutyl ketone (MIBK) were obtained as basic data. After the ion pair $TBA^+$·M$(Nph)_4^-$ was formed in water samples, the analytes were concentrated by the solvent sublation and the elements were determined by GF-AAS. The pH of the sample solution, the amount of the ligand and counter ion added and stirring time were optimized for the efficient formation of the ion pair. The type and amount of optimum surfactant, bubbling time with nitrogen and the type of solvent were investigated for the solvent sublation as well. 10.0 mL of 0.1 M 2-HNph and 2.0 mL of 0.1 M $TBA^+$ were added to a 1.0 L sample solution at pH 5.0. After 2.0 mL of 0.2%(w/v) Triton X-100 was added, the ion pairs were extracted into 20.0 mL MIBK in a flotation cell by bubbling. The analytes were determined by a calibration curve method with measured absorbances in MIBK, and the recovery was 80-120%.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.153-153
• /
• 2022

There is a growing need to develop ion sensors for agriculture. As a result, several technologies have been developed, such as colorimetry, spectrophotometry, and ion-selective electrode (ISE). Among them, ISE has some advantages compared to others. First, it does not require pre-treatment processes and expensive equipment. Second, it is possible for the portable detection system by introducing small-sized electrodes. Finally, real-time and multiple detections of several ions are pursued. It is well-known that N, P, and K nutrients are critical for crop growth. With the development of agriculture techniques, the importance of soil nutrient analysis has attracted much attention for cost-effective and eco-friendly agriculture. Among several issues, minimizing the use of fertilizers is significant through quantitative analysis of soil nutrients. As a result, it is highly important to analyze certain nutrients, such as N (ammonium ion, nitrate ion, nitrite ion), P (dihydrogen phosphate ion, monohydrogen phosphate ion), and K (potassium ion). Therefore, developing sensors for accurate analysis of soil nutrients is highly desired. n this study, several ISEs have been fabricated to detect N, P, and K. Their performance has been intensively studied, such as sensitivity, selectivity coefficient, and concentration range, and compared with commercialized ISEs. In addition, preliminary tests on the in-situ N, P, and K monitoring have been conducted inside the soil.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.323-329
• /
• 2014

The friction-reducing properties of lubricants containing ionic liquids based on ammonium dithiocarbamate are studied. The ionic liquids are produced through the following two steps: the synthesis of sodium alkyl dithiocarbamates via the substitution reaction of dialkylamine and carbon disulfide and their subsequent conversion into ammonium dithiocarbamate-based ionic liquids through an ion-exchange reaction with a quaternary alkyl ammonium halide salt. The structures of the ionic liquids are characterized by NMR spectroscopy and Fourier transform infrared spectroscopy. The isolated yields of the ionic liquids, which are viscous and pale yellow, are approximately 92%. The Brookfield viscosities and pour points of the ionic liquids are determined. Further, their wear resistances are measured through the four-ball wear test and the Schwingung Reibung Ver-schleiss (oscillation, friction, wear) test. The wear scar diameter of the lubricants containing 1 wt of the quaternary alkyl ammonium dithiocarbamate-based ionic liquids (0.475-0.631 mm) is significantly lower than that of the base oil (0.825 mm), proving that the ammonium dithiocarbamate-based ionic liquids have good friction-reducing characteristics. However, these friction-reducing characteristics fade significantly after long-term storage, owing to the degradation of the ionic liquids.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.6
• /
• pp.788-794
• /
• 2014

An extracellular ${\beta}$-glucosidase from Aspergillus niger Au0847 was purified to homogeneity by precipitation with ammonium sulfate, anion exchange, and gel filtration. The purified protein was composed of two subunits with molecular masses of 110 and 120 kDa. Au0847 ${\beta}$-glucosidase exhibited relatively high thermostability and pH stability, and its highest activity was obtained at $65^{\circ}C$ and pH 4.6, respectively. As a potential metalloprotein, its enzymatic activity was potently stimulated by manganese ion and DTT. The ${\beta}$-glucosidase displayed avid affinity and high catalytic efficiency for geniposide. Au0847 ${\beta}$-glucosidase has potential value as an industrial enzyme for the hydrolysis of geniposide to genipin.

• Journal of Applied Biological Chemistry
• /
• v.56 no.3
• /
• pp.171-177
• /
• 2013

Efficient extraction of total proteins from soil microorganisms is tedious because of small quantity. In this regard, an improved method for extraction of whole cell proteins is developed from soil microorganisms, Saccharomyces cerevisiae and Pichia pastoris. of which the cell wall are very strong. Pretreatment with NH4OH prior to the final extraction using NaOH/SDS was tried under the basis that ammonium ion was possible to enhance the permeability and/or to weaken the yeast cell walls. The pre-treatment of yeast cells with NH4OH drastically enhanced the protein extraction when it was compared with control (without NH4OH pre-treatment). At the pre-treatment of 0.04 N NH4OH at pH 9.0, about 3 fold of proteins was obtained from p. pastoris. Ammonium hydroxide appears to penetrate into the yeast cell walls more readily at basic pH. The effect of NH4OH pretreatment was pH dependent. The methods developed in this experiment might be applicable for an effective extraction of yeast proteins for the purpose of biochemical studies, especially proteomic analysis.

• Korean Journal of Plant Resources
• /
• v.5 no.1
• /
• pp.57-68
• /
• 1992

The effects of various kind and amount of nitrogen fertilizers on the plant grorth. physiological , yield and extracts. ligustilide, butylidene phthalide contents of curdsdrug "Tou-ki" (AnTelica acutiloba Kitagawa) were investigated in 1989. Five plots variouskind of nitrogen fertilizers. Namely, no nitrogen, urea. ammonium nitrate, ammoniumchloride and control plot of ammonium sulfate. The other, by providing five plotsdifferent composed ratio of nitrogenous fertilizers. containing no nitrogen (No. o) .0.5-fold nitrogen (No s), control plot of 1.0-fold nitrogen(Nl.o). 1.5-fold nitrogen(Nl s)and 2.0-fold nitrogen Na. o), but nitogen was used the ammonium sulfate. The results showedthat the crude drug "Tou-ki" can ammonium chloride be produced in good yield, displayingboth good plant growth and remarkable physiologically-active conditions, and it can beproduced such that the extracts is maximized. Additionally, using methods of gaschromatography (GC) , it was established that ligustilide and butylidene phthalide, majorcomponents in the crude drug was recovered in a good yield from the fully grown plants.The other, the plant growth, the physiologically-active, the weight of whole plant, theyield of extracts and ligustilide, butylidene phthalide were seen to be best at the plotof 2.0-fold nitrogen and according to the increase or decrease of nitrogen decreasedgradually. Therefore. about 2 fold of standard quantity seems to be the most suitablequantity of nitrogen for "Tou-ki" cultivation .uot;Tou-ki" cultivation .ion .

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.5
• /
• pp.677-685
• /
• 1999

Aerosol mass size distributions were measured at Kosan, Cheju Island in April 1998 and their compositions were analyzed. Microorifice Uniform Deposit Impactor(MOUDI) was used to collect aerosols. Sulfate and ammonium ions were predominatly present at fine mode of the aerosols while nitrate, chloride, and metal ions were mostly at coarse mode. Based on the size distribution of nitrate, it is suggested that most nitrate were from gas to particle conversion on coarse particles. Non-sea salt(nss) fraction of sulfate accounted for more than 90% of total sulfate mass concentration. In general, ion concentrations in this study are lower than those measured at the same site from the previous studies. Ion balance and chloride ion levels indicates that there had been anthropogenic chloride emission sources near to the site during the measurements.