• Journal of Microbiology and Biotechnology
• /
• 제15권6호
• /
• pp.1273-1279
• /
• 2005

Penicillium oxalicum strain CBPS-3F-Tsa, an efficient phosphate solubilizing fungus, was evaluated for its production of organic acid in vitro and effect of inoculation on the growth promotion of Maize under greenhouse conditions. The fungus solubilized 129.1, 118.8, and 54.1 mg P/1 of tricalcium phosphate [$Ca_{3}(PO_{4})_{2}$], aluminum phosphate ($A1PO_{4}$),and ferric phosphate ($FePO_{4}$), respectively, after 72 h of incubation. Malic acid, gluconic acid, and oxalic acid were detected in the flasks supplemented with various phosphate sources [240, 146, 145 mM/1 $A1PO_{4},\;FePO_{4},\;and\;Ca_{3}(PO_{4})_{2}$, respectively] together with a large amount of malic acid followed by the other two. The effects of inoculation of P. oxalicum CBPS-3F-Tsa on maize plants were studied under pot culture conditions. P. oxalicum CBPS-3F-Tsa was inoculated to maize plants alone or together with inorganic phosphates in the form of fused phosphates (FP) and rock phosphates (RP). Inoculation of P. oxalicum CBPS-3F-Tsa increased the plant growth and N and P accumulation in plants, compared with control plants, and also had positive effects when applied with RP. The results of this study show that the fungus P. oxalicum strain CBPS-3F-Tsa could solubilize different insoluble phosphates by producing organic acids, particularly malic acid, and also improved the efficiency of RP applied to maize plants.

• 한국환경과학회지
• /
• 제7권2호
• /
• pp.141-148
• /
• 1998

Effects of alumlnlum(AA), soil pH and calcium(Cal on growth response and heavy metal accumulation and regulation of nitrogen fixation In Melilotus suaveolens seedlings, a biennial legume plant dominating in the disturbed area, were quantitatively analyzed during the growing periods. Accumulation of metals In each organ of M. suaveojens was Increased UC the lowering of pH. Al contents In leaf and root treat- ed with 30ppm Al at pH 4.2 on the 28th day after treatment were 8 and 11 folds higher than those of control, while the contents with 100ppm AA were 21 and 24 folds as compared to control. The significent inhibition in Al contents was induced by 100ppm AA and Ca at pH 6.5. Increased metals inhibited higher at pH 4.2 and the growth inhibition due to Al was reversed by the addition of Ca, suggesting that growth correlates to the pH value. Chlorophyll contents in leaves increased during growth stave were inhibited by Al treatments. The biomass was decreased UD the lowering of pH and the increase of concentrations. 100ppm Ca treatment resulted in 5.1-5.9% increase of the biomass as compared to that of 100ppm Al. Specific nitrogen fuation activities In nodules In the 100ppm Al at pH 4.2 and pH 6.5 were reduced to 35. 2% and 52.2% of control, on the 28th day after treatment, while the combination of Al and Ca induced reduced by 10% as compared to control with the treatment of 100ppm AA at pH 4.2 due to the inhibition bination of 100ppm Al and Ca and lowering of pH.

• 한국전기전자재료학회논문지
• /
• 제19권1호
• /
• pp.18-22
• /
• 2006

Epitaxial aluminum nitride films on 6H-SiC (0001) were fabricated using reactive RF magnetron sputtering and post-deposition rapid thermal annealing. The electrical properties of AIN films depending on film thickness and measurement temperature have been observed. Full width at half maximum of AIN (0002) was $0.1204^{\circ}$ (about 430 arcsec) X-ray rocking curve results. The equivalent oxide thickness (EOT) of AIN film was estimated as about 10 nm and the leakage current density was within the order of $10^{-8} 4/cm^2$. The dielectric constant of AIN film estimated from the accumulation region of C-V curve measured at $300^{\circ}C$ was 8.3. The dynamic dielectric constant was obtained as 5.1 from J vs. 1/T plots at the temperature ranging from R.T. to $300^{\circ}C$ From above, estimation temperature dependance of the electrical properties of Al/AIN/SiC MIS devices was affirmed and useful data compilation for the reliabilities of SiC MIS is expected.

• 열처리공학회지
• /
• 제9권2호
• /
• pp.139-146
• /
• 1996

The aero-industry is union industry which includes a research development type, a knowledge accumulation type and a developed country type. The aero-industry of Korea is in semi-developed type stage but departed later than that of other country such as Taiwan, Indonesia etc. Therefore, the necessity of domestic airplane material is required. This study on 7050Al extruded alloy aims to suggest an adequate heat treatment conditions of T73, T74 and T76. The results of this study show that; 1. The optimum conditions of T7x heat treatment in extruded 7050Al alloy show this; $$T73:121^{\circ}C{\times}7hr+177^{\circ}C{\times}14hr$$. $$T74:121^{\circ}C{\times}7hr+177^{\circ}C{\times}10hr$$. $$T76:121^{\circ}C{\times}7hr+163^{\circ}C{\times}21hr$$. 2. The 2nd step aging heat treatment such as T73, T74 and T76 etc. is efective in 7050Al alloy but the variation otf microstructure and mechanical property with dispersive inclusions produced for extrusion process causes some troubles. Accordingly, in order to produce a good 7050Al alloy, a careful attention is needed in manufacturing process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.571-576
• /
• 1994

In recent years, ultrasonic has been widely applied in measurement and industrial fields and its application range has been expanded as a result of continuous research and development. Wire Bonding Machine, an instrument fabricating semi-conductor, makes use of ultrasonic bonding method. In order to improve the currently used wire bonding machine using ultrasonic energy, technical accumulation is needed steadily through development of exciting device of ultrasonic composed of piezoelectic vibrator and horn. This study investigates the design conditions affecting the dynamic characteristics through the theoretical and experimental analysis of piezoelectric vibrator and horn, The study conducts separately the system identification of piezoelectric vibrator in time domain and the modal analysis of horn in frequency domain. In theoretical model, the integrated modeling is conducted via a combination of dynamic identification of piezoelectric vibrator and theoretical analysis of horn. Hence comparison is made for theoretical and experimental results of the dynamic characteristics of the ultrasonic transducer composed of piezoelectric vibrator and horn. Form the results of this study we develop the design technique of ultrasonic transducer using dynamic characteristic analysis and propose the possibility of ultrasonic welding considering the optimal condition of the natural frequency and vibration mode of horn.

• 한국재료학회지
• /
• 제29권6호
• /
• pp.378-384
• /
• 2019

Ice accumulation on Aluminum Conductor Steel Reinforced(ACSR) cable during winter is an important matter in terms of safety, economy, and efficient power supply. In this work, the ice adhesion strengths of ACSR cable oxidized during different periods(7 years oxidized and 15 years oxidized) are evaluated. At first, a plate type dry oxidation standard specimen, whose surface characteristics are similar to those of ACSR cable, is prepared. Dry oxidation standard specimens are heat-treated at $500^{\circ}C$ for 20, 60, and 120 minutes in order to obtain different degrees of oxidation. After the dry oxidation, surface properties are analyzed using contact angle analyzer, atomic force microscopy, spectrophotometer, and gloss meter. The ice adhesion strengths are measured using an ice pull-off tester. Correlations between the surface properties and the ice adhesion strength are obtained through a regression analysis indicating a Boltzmann equation. It is revealed that the ice adhesion strength of 15-year oxidized ACSR cable is approximately 8 times higher than that of ACSR-bare.

• 대한한의학방제학회지
• /
• 제21권1호
• /
• pp.36-50
• /
• 2013

Objectives : To clarify the possible effect of Lycium chinese Mill (LC)., Morus alba L (MA)., and Lycium chinese Mill. +Morus alba L. (LC+MA), we have examined their influence on the development of pulmonary eosinophilic inflammation in the asthmatic murine model. Methods : Female Balb/c mice (5weeks) were immunized on two different days (21 days and 7 days before inhalational exposure) by intraperitonial injections of 0.2ml alum-precipitated Ag containing $100{\mu}g$ of OVA bound to 4 mg of aluminum hydroxide in PBS. Seven days after the second sensitization, mice were exposed to aerosolized ovalbumin for 30 minutes/day on 3 days/week for 8 weeks (at a flow rate of 250 L/min, 2.5% ovalbumin in normal saline) and, LC, MA, and LC+MA (500 mg/kg) were orally administered 3 times per a week for 8 weeks. Results : The suppressive effect of LC, MA, and LC+MA were demonstrated by the accumulation of eosinophills into airways, with the reduction of eosinophil, total lung leukocytes numbers. These were correlated with the marked reduction of IL-5, IL-13 and IL-4 levels in the BALF and serum. OVA-specific IgE levels were also decreased in serum and BAL from these mice. LC, MA, and LC+MA decreased eosinophil CCR3 expression and CD11b expression in lung cells. Conclusions : These results indicate that LC, MA, and LC+MA have high inhibitory effects on airway inflammation and hyper-responsiveness in the asthmatic murine model. The suppression of IL-5, IgE, eosinophil CCR3 expression and CD11b expression, and the increase of IFN-${\gamma}$ production in BALF seem to contribute to this effect. Hence, the results indicated that LC, MA, and LC+MA could act as a immuno-modulator which possesses anti-inflammatory and anti-asthmatic property by modulating the imbalance between Th1 and Th2 cytokines.

• 멤브레인
• /
• 제25권3호
• /
• pp.256-267
• /
• 2015

침지식분리막 오염을 최소화하기 위한 두 가지 공기세정방식을 비교하였다. 연속적인 공기세정과 단계별 공기량을 증가시키는 방식을 연구하였다. 15분의 여과 중에 세정공기의 증가는 5분마다 단계별로 공기량을 증가시켜주었다. 모의 여과 원수에 분말활성탄을 10 g/L 이하 그리고 카올린은 20 g/L 이하로 준비하였으며, 플러스는 80 LMH로 하였다. 단계별 공기세정방식은 연속적인 공기세정 방식보다 분리막 오염억제에 효과적이었다. 추가적으로 주입된 응집제는 분리막 오염저감을 보다 향상시켰다. 연속적인 공기세정의 오염현상은 공경막힘과 분리막 표면에 지속적인 입자의 축적에 기인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.109-114
• /
• 2004

This paper presents a theoretical and experimental study of a non-collocated pair of piezopolymer PVDF sensor and piezoceramic PZT actuator, which are bonded on a cantilever beam, in order to suppress unwanted vibration at the tip of the beam. The PZT actuator patch was bonded near the clamped part and the PVDF sensor, which was triangularly shaped, was bonded on the other part of the beam. This is because the triangular PVDF sensor is known that it can detect the tip velocity of a cantilever beam. Because the arrangement of the sensor and actuator pair is not collocated and overlapped each other, the pair can avoid so called 'the in-plane coupling'. The test beam is made of aluminum with the dimension of $200\times20\times2mm$, and the two PZT5H actuators are both $20\times20\times1mm$ and bonded on the beam out-of-phase, and the PVDF sensor is $178mm\times6mm\times52{\mu}m$. Before control, the sensor-actuator frequency response function is confirmed to have a nice phase response without accumulation in a reasonable frequency range of up to 5000 Hz. Both the DVFB and displacement feedback strategies made the error signal from the tip velocity (or displacement) sensor is transmitted to a power amplifier to operate the PZT actuator (secondary source). Both the control methods attenuate the magnitude of the first two resonances in the error spectrum of about 6-7 dB.

• 한국포장학회지
• /
• 제28권2호
• /
• pp.143-149
• /
• 2022

PCS needs to freely switch AC and DC to connect the battery, external AC loads and renewable energy in both directions for energy efficiency. Whenever converting happens, power loss inevitably occurs. Minimization of the power loss to save electricity and convert it for usage is a very critical function in PCS. PCS plays an important role in the ESS(Energy Storage System) but the importance of stabilizing semiconductors on PCB(Printed Circuit Board) should be empathized with a risk of failure such as a fire explosion. In this study, the temperature variation inside PCS was reviewed by cooling fan on top of PCS, and the vibration characteristics of PCS were analyzed during truck transportation for reliability of the product. In most cases, a cooling fan is mounted to control the inner temperature at the upper part of the PCS and components generating the heat placed on the internal aluminum cooling plate to apply the primary cooling and the secondary cooling system with inlet fans for the external air. Results of CFD showed slightly lack of circulating capacity but simulated temperatures were durable for components. The resonance points of PCS were various due to the complexity of components. Although they were less than 40 Hz which mostly occurs breakage, it was analyzed that the vibration displacement in the resonance frequency band was very insufficient. As a result of random-vibration simulation, the lower part was analyzed as the stress-concentrated point but no breakage was shown. The steel sheet could be stable for now, but for long-term domestic transportation, structural coupling may occur due to accumulation of fatigue strength. After the test completed, output voltage of the product had lost so that extra packaging such as bubble wrap should be considered.