• 대한방사선기술학회지:방사선기술과학
• /
• 제37권4호
• /
• pp.273-278
• /
• 2014

골밀도는 골다공증 진단에 중요하게 이용되고 있고, 치료 및 예방에 중요한 지표가 되고 있다. 그러나 골밀도는 피검자의 상태, 골밀도 측정기, 검사자 등에 의해 정밀도의 오차가 발생할 수 있다. 골밀도에 미치는 다양한 요인 중 요추 부위에 실질적인 영향을 일으킬 수 있는 장내가스, 음식, 물을 통하여 환자의 상태에 따라 어떻게 변화하는지 알아보고자 하였다. Aluminium spine phantom(ASP)을 이용하여 수조의 물 높이 변화와 가스의 유무에 따른 골밀도의 변화를 알아보았다. 또한 자원자를 대상으로 물이 증가하거나 음식물 증가에 의한 골밀도의 영향을 알아보았다. Aluminium spine phantom을 통한 골밀도 측정에서 수조의 물 높이가 증가함에 따라 골밀도가 감소하여 통계적으로 유의한 변화를 관찰하였다(p=0.026). 가스의 유무에 따른 골밀도의 유의한 차이가 없었다(p=0.587). 자원자를 대상으로 한 연구에서는 음식물의 유무에 따른 골밀도가 유의한 차이가 없었으며(p=0.812), 물의 유무에 따라서도 골밀도의 유의한 차이가 없었다(p=0.618). 따라서 요추부 골밀도 측정에서 골의 경계를 인지하는데 어려움이 없다면, 환자의 금식여부나 대장 내시경 검사 후에 시행하는 골밀도 검사는 골밀도에 큰 영향을 끼치는 인자가 아님을 알 수 있었다.

• 대한환경공학회지
• /
• 제35권4호
• /
• pp.240-246
• /
• 2013

$SF_6$는 지구온난화지수가 가장 높은 중요한 온실가스이다. 본 연구에서는 마이크로파 조사에 따른 산화알루미늄이 혼합된 실리콘카바이드의 SF6 제거실험을 실시하였다. DRE (Decomposition and Removal Efficiencies)실험은 3,000 ppm의 $SF_6$를 사용하여 GC-TCD를 통하여 분석하였다. 산화알루미늄의 함량이 10~30 wt%까지 $SF_6$의 제거효율은 증가하였으나 산화알루미늄의 함량이 40~50 wt%에서 제거효율이 감소하였다. 특히 $900^{\circ}C$ 이상 에서 SiC-$Al_2O_3$ (20 wt%)와 SiC-$Al_2O_3$ (30 wt%)는 99.99%의 $SF_6$ 제거효율을 보여주었으며 SiC-$Al_2O_3$ (30 wt%)가 $700^{\circ}C$에서 96.72%의 제거효율을 보여주었다. 마이크로파 조사량과 산화알루미늄의 함량을 고려시 SiC-$Al_2O_3$ (30 wt%)가 $SF_6$ 제거에 가장 적절하였다. 본 연구의 결과로 마이크로파에 의한 $SF_6$ 제거시 SiC에 $Al_2O_3$의 함량 조절이 중요할 것으로 사료되어진다.

• 환경생물
• /
• 제32권4호
• /
• pp.271-285
• /
• 2014

알루미늄은 폐광산 침출수, 산업폐수, 생활하수 등을 통해 수계로 유입되어 수생생물에 농축되고 독성을 유발할 수 있다. 최근 다양한 수생생물에서 알루미늄의 독성에 관한 보고가 증가하고 있지만 오염현황 및 생태독성에 대한 연구가 많이 이뤄지지 않았다. 본 소고에서는 수서무척추동물, 어류, 양서류에서 알루미늄의 독성자료를 고찰함으로써 잔류량 가이드라인 설정의 필요성과 알루미늄의 수생태독성 분석전략을 제언하고자 하였다. 다양한 형태의 알루미늄화합물이 수생동물에서 1차적으로 아가미기능을 방해하여 생존을 위협하고 세포독성, 유전독성, 산화적스트레스, 내분비계교란, 생식교란, 대사교란, 항상성교란 등의 독성효과가 있는 것으로 확인되었다. 특히, 산성조건에서 환경잔류농도 수준의 알루미늄 화합물은 어류에서 호르몬농도 변화를 유발하였다. 알루미늄은 산성 및 염기성 조건에서 용해도가 증가하기 때문에 국내의 폐광산 인근의 산성 수계 뿐 아니라 조류 대발생에 의해 pH가 상승하는 호수나 강에서도 알루미늄의 독성효과가 나타날 것으로 사료된다.

• 대한치과기공학회지
• /
• 제28권2호
• /
• pp.355-366
• /
• 2006

The purpose of this study was to determine if repeated casting has a detrimental effect on the corrosion behavior of nickel-chrome casting alloys. The X-ray diffraction analysis, vickers hardness test, SEM, EDX and corrosion test were performed to determine the effects of recasting on chemical composition, microstructure, physical property, castability and corrosion behavior of nickel-chrome casting alloys. The X-ray diffraction analysis results for the cast and recast specimens of the VeraBond and the Rexillium V showed that major crystal phase contained nickel-chrome compounds, Nickel carbide and Chrome carbide. Microstructure analysis results for the cast and recast specimens of the VeraBond and the Rexillium V showed recasting has no effect on microstructure. EDX analysis results indicated the percentage of the main component nickel(Ni) in the specimens of the VeraBond showed a tendency to increase with recasting, but those of other components Carbon(C) showed a tendency to decrease with recasting, Chrome(Cr), Silicon(Si), Aluminium(Al) and molybdenum(Mo) showed no changes in the percentage. The percentage of the main component nickel(Ni) in the specimens of the Rexillium V showed a tendency to increase with recasting, but those of other components silicon(Si), carbon(C) and molybdenum(Mo) showed a tendency to decrease with recasting, chrome(Cr) and aluminium(Al) showed no changes in the percentage. The vickers hardness results for the cast and recast specimens of the VeraBond and the Rexillium V showed a tendency to decrease with recasting, but the differences for the first to fifth cast were not statistically significant. The castability results for the cast and recast specimens of the VeraBond and the Rexillium V showed a tendency to decrease with recasting, but the differences for the first to fifth cast were not statistically significant. The cast and recast specimens of the VeraBond and the Rexillium V showed no differences in the corrosion resistance. The results indicate that the VeraBond and the Rexillium V can be safely recast.

• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.50-60
• /
• 2008

The majority of the described experimental results deal with relatively pure aluminium. Variations were made in the pretreatment of the aluminum substrates and an investigation was performed on the resulting changes in oxide layer composition and chemistry. Subsequently, the bonding behavior of the surfaces was investigated by using model adhesion molecules. These molecules were chosen to represent the bonding functionality of an organic polymer. They were applied onto the pretreated surfaces as a monolayer and the bonding behavior was studied using infrared reflection absorption spectroscopy. A direct and clear relation was found between the hydroxyl fraction on the oxide surfaces and the amount of molecules that subsequently bonded to the surface. Moreover, it was found that most bonds between the oxide surface and organic functional groups are not stable in the presence of water. The best performance was obtained using molecules, which are capable of chemisorption with the oxide surface. Finally, it was found that freshly prepared relatively pure aluminum substrates, which are left in air, rapidly lose their bonding capacity towards organic functional groups. This can be attributed to the adsorption of contamination and water to the oxide surface. In addition the adhesion of a typical epoxy-coated aluminum system was investigated during exposure to water at different temperatures. The coating was found to quite rapidly lose its adhesion upon exposure to water. This rapid loss of adhesion corresponds well with the data where it was demonstrated that the studied epoxy coating only bonds through physisorptive hydrogen bonding, these bonds not being stable in the presence of water. After the initial loss the adhesion of the coating was however found to recover again and even exceeded the adhesion prior to exposure. The improvement could be ascribed to the growth of a thin oxyhydroxide layer on the aluminum substrate, which forms a new, water-stable and stronger bond with the epoxy coating. Two routes for improvement of adhesion are finally decribed including an interphasial polymeric thin layer and a treatment in boiling water of the substrate before coating takes place. The adhesion properties were finely also studied as a function of the Mg content of the alloys. It was shown that an enrichment of Mg in the oxide could take place when Mg containing alloys are heat-treated. It is expected that for these alloys the (hydr)oxide fraction also depends on the pre-treatment and on the distribution of magnesium as compared to the aluminium hydroxides, with a direct impact on adhesive properties.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.799-806
• /
• 2017

점토를 이용하여 세 종류의 새로운 형태의 변형된 유기물점토를 제조하였다. Cetylpyridinium chloride (CPC)를 점토에 층간 삽입시켜 OC-CPC를 합성하였고, Aluminium 축을 갖는 Al-PILC 만든 후, cetylpyridinium chloride를 Al-PILC에 삽입시켜 IOC-CPC 화합물을 합성하였다. IR과 TGA를 이용하여 이들 구조를 분석한 결과 층간 삽입반응이 성공적으로 이루어졌음을 확인할 수 있었다. X-ray 회절을 이용하여 층간 거리를 조사하였는데 OC-CPC가 제일 큰 값을 보여 주었다. 층간 구조를 갖는 화합물들은 삽입반응을 이용하여 구조를 변형시킬 수 있으며 이를 통해 층간거리, 표면적, 공간 크기, 화학적 친화성 같은 여러 물리적 성질들을 바꿀 수 있으므로, 본 논문에서는 자연점토를 이용하여 층간 반응을 통해 휘발성 유기화합물의 흡착에 쓰일 수 있는 유용한 유기점토 화합물을 합성하고 이들의 구조를 확인코자 하였다. 벤젠과 톨루엔의 흡착은 IOC-CPC나 Al-PILC에서 보다 OC-CPC에서 더 잘 이루어졌으며, 자연점토에서는 거의 흡착이 일어나지 않았다. OC-CPC 화합물에서는 친 소수성 성질이 크고 층간 거리도 증가했기 때문에 흡착이 잘 일어났다고 볼 수 있으며, 반면에 친수성이 큰 Al-PILC에서는 벤젠과 톨루엔 같은 휘발성 유기물에 대한 흡착이 상대적으로 적게 일어났다.

• 한국전산구조공학회논문집
• /
• 제32권1호
• /
• pp.1-5
• /
• 2019

본 연구는 접착조인트의 파손모드 및 파손강도 연구를 위해 단일 겹침 시편(Single lap shear joint)을 이용하여 해석을 실시하였다. 알루미늄과 스틸, Araldite 접착제를 이용, 시편을 제작하여 인장시험을 진행하였으며 시험데이터를 이용, 유한요소해석 결과와 비교 분석하였다. 알루미늄과 스틸, 접착제 모두 비선형해석을 통해 정확한 거동을 묘사하고자 하였다. 시험결과 파단강도는 Overlap length와 Width가 증가함에 따라 선형적으로 증가하였다. 또한 이종재료 조인트의 경우 동종재료 조인트와 비교 시 10~17% 정도의 파손강도 증가를 보였다. 이는 강성이 강한 스틸을 함께 사용함으로써 판재의 굽힘변형이 줄어들고 이를 통해 본드의 응력집중을 막는 효과를 가져왔기에 나타난 현상으로 분석된다. 유한요소해석을 통한 응력분포 및 변형률 분포를 분석한 결과 동종재료의 경우 본드 양 끝단, 이종재료의 경우 강성이 약한 판재와 가까운 부분에서 집중이 발생하였다. 응력집중 및 파손의 주요 인자를 확인하기 위해 본드의 각 성분 별 응력 값을 측정해 본 결과 1-3방향 전단응력 이 파손의 가장 큰 인자로 분석되었다.

• 한국염색가공학회지
• /
• 제30권3호
• /
• pp.216-226
• /
• 2018

The combination dyeing have been attempted to get the various color. The objective of this research was to study the color developing effects on cotton fabrics dyed with persimmon, catechu and combination of the both by heat treatment process. These dye were applied on bleached cotton fabrics for the dyeing before post mordanting with aluminium potassium sulfate, copper sulfate, and iron sulfate. The various color changes on cotton fabric were measured by color spectrophotometer. The heat treatment of temperature around $150^{\circ}C$ for an hour can reach the highest color developing. The dyed fabrics with mordanting were heated for specific time period, which was compared without the mordanting. The post mordanted fabrics showed that more various colors can be obtained using combination dyeing. K/S values of dyed fabrics with Al, Fe, and Cu mordants were higher than the cases without mordants. The Cu mordanted fabric showed very effective color developing by the heating process. The fabrics dyed with catechu lowered L* value with little changes in a* and b* values, while the a* and b* values became higher with heat treatment. The fabrics dyed with persimmon has the lowest L* value and more changes in a*, b* value with heating process. Therefore, K/S values can be increased effectively by the combination dyeing of persimmon and catechu. Colorfastness to washing in color change was grade 2-3 in non-mordanted fabric, and grade 3 in mordanted fabric. Lightfastness of the dyed fabrics was above grade 4.

• 한국토양비료학회지
• /
• 제47권6호
• /
• pp.533-539
• /
• 2014

Mine wastes such as acid mine drainage (AMD) can cause the detrimental effects on surrounding environment, thereby eventually threatening human health. Main objective of this study was to evaluate the neutralizing effect of fly ash (FA) as a stabilizing material AMD. Field plot was constructed in a coal waste depot which has caused aluminium-whitening adjacent to the stream. Different mixing ratios of FA were applied on a top of the soil, and then the physicochemical properties of runoff and soil were monitored. Constructed plots were as following: control (mine waste only (W)), mine waste + 20% ($w\;w^{-1}$)of FA (WC20M), mine waste + 40% ($w\;w^{-1}$)of FA (WC40M), and WC40M dressed with a fresh soil at the top (WC40MD). Result showed that initial pH of runoff in control was 5.09 while that in WC40M (7.81) was significantly increased. For a plot treated with WC40M, the concentration of Al in runoff was decreased to $0.22mg\;L^{-1}$ compared to the W as the control ($4.85mg\;L^{-1}$). Moreover, the concentration of Fe was also decreased to less than half at the WC40M compared to the control. Application of FA can be useful for neutralizing AMD and possibly minimizing adverse effect of AMD in mining area.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1171-1171
• /
• 2001

Quantitative analysis is an important requirement in exploration, mining and processing of minerals. There is an increasing need for the use of quantitative mineralogical data to assist with bore hole logging, deposit delineation, grade control, feed to processing plants and monitoring of solid process residues. Quantitative analysis using X-Ray Powder Diffraction (XRD) requires fine grinding and the addition of a reference material, or the application of Rietveld analysis to XRD patterns to provide accurate analysis of the suite of minerals present. Whilst accurate quantitative data can be obtained in this manner, the method is time consuming and limited to the laboratory. Mid infrared when combined with multivariant analysis has also been used for quantitative analysis. However, factors such as the absorption coefficients and refractive index of the minerals requires special sample preparation and dilution in a dispersive medium, such as KBr to minimize distortion of spectral features. In contrast, the lower intensity of the overtones and combinations of the fundamental vibrations in the near infrared allow direct measurement of virtually any solid without special sample preparation or dilution. Thus Near Infrared Spectroscopy (NIR) has found application for quantitative on-line/in line analysis and control in a range of processing applications which include, moisture control in clay and textile processing, fermentation processes, wheat analysis, gasoline analysis and chemicals and polymers. It is developing rapidly in the mineral exploration industry and has been underpinned by the development of portable NIR spectrometers and spectral libraries of a wide range of minerals. For example, iron ores have been identified and characterized in terms of the individual mineral components using field spectrometers. Data acquisition time of NIR field instruments is of the order of seconds and sample preparation is minimal. Consequently these types of spectrometers have great potential for in-line or on-line application in the minerals industry. To demonstrate the applicability of NIR field spectroscopy for quantitative analysis of minerals, a specific example on the quantification of lateritic bauxites will be presented. It has been shown that the application of Partial Least Squares regression analysis (PLS) to the NIR spectra can be used to quantify chemistry and mineralogy in a range of lateritic bauxites. Important, issues such as sampling, precision, repeatability, and replication which influence the results will be discussed.