• 방사성폐기물학회지
• /
• 제11권1호
• /
• pp.11-21
• /
• 2013

현재 고준위 방사성 폐기물 심층 처분 시스템에서 기본 완충재 물질로서 건조밀도 1.6 g/$cm^3$의 경주산 칼슘 벤토나이트를 사용하고 있으나, 열전도도가 낮은 단점이 있다. 따라서 본 연구에서는 기준 완충재의 열전도율을 0.8 W/mK에서 1.0 W/mK로 향상시키기 위한 목적으로 다양한 첨가제를 다양한 혼합 방법을 통해 배합하고 열전도도를 측정하였다. 첨가제는 CNT(Cabon Nano Tube), Graphite, Alumina, CuO 및 $Fe_2O_3$ 등을 사용하였다. 혼합 방법의 경우, 핸드 믹서기를 통한 건식혼합, 습식 Milling 혼합, 건식 Ball Mill 혼합 등을 실시하였다. Ball Mill 혼합의 경우가 가장 균일하게 혼합되었기 때문에, 값의 편차가 가장 적었고 열전도도 증가율이 가장 좋았다. 지금까지 수행된 시험에서 소량의 고열전도 물질의 첨가로 경주산 칼슘 벤토나이트의 열전도도를 1.0 W/mK 수준으로 용이하게 증가시킬 수 있음을 실험적으로 확인할 수 있었다. 결론적으로, 본 연구에서 제시된 열전도 향상 방법은, 첨가제 혼합이 벤토나이트의 기본 성질인 팽윤압과 수리전도도에 미치는 영향까지 제시된다면, 국내 고준위폐기물 처분장의 개념 설계에 유용하게 활용될 수 있을 것으로 기대된다.

• 대한방사성의약품학회지
• /
• 제1권2호
• /
• pp.104-108
• /
• 2015

Human serum albumin (HSA) has potential for diagnosis and therapy in clinical setting. The purpose of experiments was to develop and evaluate $^{68}Ga$-HSA as a PET agent for diagnosis of acute inflammation. NOTA-HSA was synthesized by conjugating 2-(p-isothiocyanatobenzyl)-1,4,7-triazacyclononane-1,4,7-triacetic acid to HSA in 0.1 M sodium carbonate buffer (pH 9.5) and then purified using a PD-10 size-exclusion column. NOTA-HSA was labeled with $^{68}Ga$ at room temperature for 10 min, and 8.4% sodium hydrogen carbonate buffer was added for neutralization. $^{68}Ga$-NOTA-HSA was purified using alumina N plus light cartridge and $0.22{\mu}m$ syringe filter. Labeling efficiency and radiochemical purity were determined by ITLC-SG with 0.1 M citric acid. Biodistribution study was performed in a male BALB/c mice model of Carrageenan-induced acute inflammation. Animal PET study was performed in acute inflammation mice model after tail vein injection of $^{68}Ga$-HSA. This radiotracer showed high labeling efficiency (>99%) around pH 7. Biodistribution study showed higher inflamed footpad uptake than control footpad uptake. Animal PET study revealed 2 times higher uptake on inflamed footpad compared to control footpad. In these experiments, we developed $^{68}Ga$-HSA for acute inflammation PET imaging and evaluated it in a mouse disease model. The results demonstrated that $^{68}Ga$-HSA has potential as a PET imaging agent for diagnosis of acute inflammation.

• 한국광학회지
• /
• 제3권3호
• /
• pp.178-182
• /
• 1992

내경 1.6cm, 길이 50cm의 알루미나 세라믹 방전관을 사용하여 방전전극간의 거리가 45cm인 공쟁식 방전가열형 구리증기레이저를 제작하였다. 방전가열 및 여기를 위한 6kV, 500mA 정격의 직류 고전압 전원장치, 1.8H의 중전 인덕터와 5nF의 에너지저장 캐패시터를 포함하는 resonant charging 방식의 고전압 충전회로와 1-7kHz 범위의 펄스반복률로 동작하는 thyratron 구동회로가 각각 설계 제작되었다. 개발된 레이저장치는 방전관의 온도 $1350^{\circ}C$ 부근에서 발진을 시작하였고, 충전전압 12kV, 펄스반복률 4.5kHz, 네온완충기체압력 50mbar, 동작온도 $1460^{\circ}C$일 때 0.7W의 최대평균 출력을 얻었다.

• Corrosion Science and Technology
• /
• 제17권2호
• /
• pp.68-73
• /
• 2018

Substitution of hip and knee joints by CoCr alloys is in great demand due to their high wear resistance and good biocompatibility. Understanding of tribocorrosion in joint replacements requires study of variables such as coefficient of friction and the choice of a proper corrosive medium in wear-corrosion tests carried out in the lab. The objective of this study was to characterize tribocorrosion behaviour of CoCr alloy with low (LCCoCr) and high carbon (HCCoCr) contents in several corrosive media: NaCl, Phosphate Buffer Solution (PBS), and PBS with hyaluronic acid (PBS-HA). Tribocorrosion tests were carried out on a pin-on-disk tribometer with an integrated electrochemical cell. A normal load of 5N was applied on the alumina ball counterpart at a rotation rate of 120 rpm. Coefficient of friction (COF) was measured and tribocorrosion behaviour was characterized by in situ application of electrochemical techniques. HCCoCr alloy immersed in PBS-HA showed the best tribocorrosion behaviour with the lowest COF. In this case, in situ measurement of corrosion potential and the impedance data under wear corrosion process showed an active state while passive film was continuously destroyed without possibility of regeneration.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.372-378
• /
• 2001

The aim of this in vitro study was to analyze the composition of human tooth enamel in terms of three components, Ca, P, and F after demineralization and remineralization in acid buffer solution. A total of 8 human premolars without any defects and cracks were selected and buccal and lingual sides of the teeth were cleaned with an ultrasonic device and pumice without fluoride 5$\times$5mm windows were opened, and other areas were completely covered with 3-coats of nail varnish to prevent from being in contact with demineralized and remineralized solutions. After demineralization process, each tooth was sectioned into two slices, highly polished one of them with$\gamma$-alumina, and then analyzed the composition of the demineralized tooth with EPMA(electron probe micro-analyzer). The other slices were put into the remineralized solution for 10 days, polished, and analyzed in the same manner. These data were statistically analyzed with one sample t-test(p<0.05). The results were as follows. 1. Normal tooth enamel consists of 49.76% Ca, 39.80% P, and 0.28% F. 2. After demineralization, percentage of Ca and P ratio were decreased by about 5.57 and 5.07% respectively. Percentage of F ratio was also decreased by about 0.01%, which was not statistically significant. 3. After remineralization, percentage of Ca, P increased about by 4.47 and 4.35% respectively Percentage of F decreased by about 0.01%, which was not statistically significant. In conclusion, remineralized solution used in our study has the potential to induce the uptake the Ca and P into the pore sites of the demineralized enamel. But, in the oral cavity. there were rapid temperature change, organic matrix that inhibits the movement of the ions, and limitation of continuous contact with this remineralized solution. Therefore, further in vivo study is necessary.