• 응용통계연구
• /
• 제22권5호
• /
• pp.1097-1102
• /
• 2009

Classification of subjects with unknown distribution in small sample size setup may involve order-restricted constraints in multivariate parameter setups. Those problems makes optimality of conventional likelihood ratio based statistical inferences not feasible. Fortunately, Roy (1953) introduced union-intersection principle(UIP) which provides an alternative avenue. Redescending M-estimator along with that principle yields a considerably appropriate robust testing procedure. Furthermore, conditionally distribution-free test based upon exact permutation theory is used to generate p-values, even in small sample. Applications of this method are illustrated in simulated data and read data example (Lobenhofer et al., 2002)

• Communications for Statistical Applications and Methods
• /
• 제6권2호
• /
• pp.357-366
• /
• 1999

Let us assume that two different log-linear models are selected by various model selection methods. When these are non-hierarchical it is not easy to choose one of these models. In this paper the well-known Cox's statistic is applied to compare these non-hierarchical log-linear models. Since it is impossible to obtain the analytic solution about the problem we proposed a alternative method by extending Pesaran and pesaran's (1993) simulation approach. We find that the values of proposed test statistic and the estimates are very much stable with some empirical results.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.114-116
• /
• 2015

This paper presents a Stochastic Time-Cost Tradeoff analysis system (STCT) that identifies optimal construction methods for activities, hence reducing the project completion time and cost simultaneously. It makes use of schedule information obtained from critical path method (CPM), applies alternative construction methods data obtained from estimators to respective activities, computes an optimal set of genetic algorithm (GA) parameters, executes simulation based GA experiments, and identifies near optimal solution(s). A test case verifies the usability of STCT.

• 한국임상수의학회지
• /
• 제28권1호
• /
• pp.108-112
• /
• 2011

In clinical settings, researchers often want to assess agreement between two measurements (or tests) of the same continuous variable. For example, when new point-of-care analyzer for testing blood glucose level were introduced clinicians need to compare results from standard or established laboratory method of measurement to those of new or point-of-care analyzer. The question in a method-comparison study would either of two different methods be used to measure the same variable equivalently. In this paper common misuse of statistical methodologies seen in the medical literatures such as correlation coefficient and paired t-test are discussed. The Bland-Altman technique has been widely used for this purpose and provides a graphic in presentation of the findings from a method-comparison study, with a mean value of measurement, this bias and the limits of agreement. For ease of application and interpretation of this technique we discussed the analysis procedure and illustrated with two worked examples. Finally, a number of alternative ways in which data can be analysed and reported in such studies were reviewed.

• 대한교통학회지
• /
• 제22권4호
• /
• pp.85-96
• /
• 2004

합리적 통행경로는 "경로를 노드 또는 링크의 순서로 표현할 때, 경로를 구성하는 노드의 반복은 존재해도 링크의 반복은 존재하지 않는다"는 원리에 근거한다. 최적경로 탐색과정에서 합리적 통행현상을 포함하는 방법은 링크로 구성된 표지(Link-Based Label)를 적용하는 방안이 적용하기 용이하다. 링크표지를 활용하는 경우 링크의 중복 표현을 허용되지 않는 상황에서 노드의 중복표현이 가능하여 합리적인 통행을 원칙적으로 보장될 뿐만 아니라 목적지에서 출발지로 경로를 역 추적(Backward Trace)하는 과정에서 전 링크(Pvevious Link)의 단일정보만 이용하므로 Bellman의 최적원리(Optimality Condition)에 의한 최적해(Optimal Solution)가 보장된다. 본 연구는 다수의 경로를 선정함에 있어 합리적 통행행태를 고려하기 위한 링크표지고정방식(Link-Based Label Setting)을 제안한다. 기존에 표지고정(Label Setting)을 기반으로 제안되었던 노드기반 다수경로알고리즘을 기반으로 링크표지로 전환하는 방안을 개발한다. 또한 알고리즘의 대규모 교통망에 적용한 수행결과를 통해 대안경로정보제공을 위한 현실적용의 문제점을 도출하고, 도로의 연속주행을 보장하려는 운전자의 경로선택행태를 반영하는 방안에 대해 검토한다.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.413-418
• /
• 2022

This paper presents two-phase condensation heat transfer and pressure drop characteristics of R32 and R454B as an alternative refrigerant to R410A in a 9.52 mm OD microfin tube. The test facility has a straight, horizontal test section with an active length of 2.0 m and is cooled by cold water circulated in a surrounding annular space. The heat transfer coefficients of the annular space were obtained using the modified Wilson plot method. Average condensation heat transfer coefficient and pressure drop data are presented at the condensation temperature of 35℃ for the range of mass flux 100-400 kg/m²s. The average condensation heat transfer coefficients of R32 refrigerant are 35-47% higher than R410A at the mass flux considered in the study, while R454B data are similar to R410A. The average pressure drop of R32 and R454B are much higher than R410A and they are 134-224% and 151-215% of R410A, respectively. R32 and R454B have relatively low GWP and high heat transfer characteristics, so they are suitable as alternatives for R410A.

• 한국전문물리치료학회지
• /
• 제26권3호
• /
• pp.76-83
• /
• 2019

Background: The hyoid bone is the only non-jointed structure among the skeletal tissues of the head and neck region, and its movement and posture depend on the attached muscle, ligament, and fascia. The location of the hyoid bone is important for airway maintenance, vocalization, chewing, swallowing, breathing, and head and scapular position. In general, the location of the hyoid bone is measured using radiographs and 3D computed tomography, and no studies have reported on clinical measurement methods. Objects: This study was performed to suggest clinical measurement methods for lateral deviation of the hyoid bone and to evaluate their reliability. Methods: In this study, 24 healthy volunteers (12 males, 12 females) in Cheongju-si participated. Two examiners performed the center point test and lateral motion test twice each to measure the lateral displacement of the hyoid bone. The reliability of the center point test was analyzed using intra-class correlation coefficients (ICC), and the reliability of the lateral motion test was analyzed using Cohen's kappa coefficient. Results: The intra-rater reliability of the center point test was good, and the inter-rater reliability was moderate. The intra- and inter-rater reliability of the lateral motion test showed substantial reliability. Conclusion: Based on these results, the center point test and the lateral motion test can be used as an alternative methods of the measurement of lateral deviation of the hyoid bone for people who have musculoskeletal disorders of the head, neck, and scapula.

• 한국산업융합학회 논문집
• /
• 제9권4호
• /
• pp.309-315
• /
• 2006

Important material properties of UCAS rod can divide by tension characteristic of base rod part and both end part of U type anchor. Tensile properties of base rod part need as concrete reinforcement material as an alternative material of reinforcing rod, and tensile properties of U type anchor is used at connection with UCAS rod. This treatise carry out tensile test of UCAS rod, examine necessary properties such as strength, elastic modulus and maximum capacity of UCAS rod as reinforcement material of concrete. Also, to examine material properties carry out tensile test of U type anchor.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.92-99
• /
• 1996

Energy-efficient contrarotating propeller systems have been recently reviewed as one of alternative means in marine car-carrier applications. Contrarotating rotors preclude the usage of conventional plain journal bearings due to the lack of load carrying capacity. A new multi-recess hydrostatic contrarotating journal beating test facility has been designed and installed to test the static load carrying capacity. Measurements of flow rates and orbits have been investigated by testings on a overhung-type contrarotating rotor system which is supported by a hydrostatic journal bearing. Numerical results of static equilibria were compared with test results. Various contrarotating speed combinations, and supply pressure conditions were selected. The numerical predictions of orbit centers and flow rates are generally accurate.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제4권2호
• /
• pp.83-103
• /
• 2000

The purpose of this study is to develop and implement an alternative elementary mathematics curriculum to enhance creative problem solving ability. The curriculum consisting of three main elements was developed. The three elements are content knowledge, process knowledge and creative thinking skills. The curriculum contents and the units were developed by mathematics educators, elementary educators, psychologists, elementary school teachers and curriculum specialists for 3 years. In order to test the effectiveness of the developed curriculum, the 5 units based on a problem-based-learning (PBL) method were implemented in a 5th grade class as an experimental group during the second semester. For the comparison group the ordinary lesson based on the 6th national mathematics curriculum was implemented during the same period. Performance assessment was developed and used for the pre and post test. T-est was use to testify that the effect of the curriculum is statistically signigicant. The results of the test showed that the experimental group progressed significantly in the creative problem solving ability, but the comparison group did not.