• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.203-209
• /
• 2017

The propenyl ether-type monomers which are applicable for cationic photo-polymerization were synthesized by the condensation reaction of mono and di-functional alcohol with allyl bromide. To examine photo-curable reactivity, these monomers were combined with cationic photoinitiator to prepare coating composition. As a result, the initial rate of polymerization of POMB in mono propenyl ether type was 10.2, which was relatively lower than BPOB in di-propenyl ethers type. However, POMB containing 1.5mol% photoinitiator almost quantitatively reacted within 90 seconds. In addition, Sulfonium salt type photo-initiators containing long-alkyl group showed good solubility with monomers and apperaed to have comparatively higher rate of polymerization and conversion ratio when applying DPSA and DPST which have high acidity on all monomers.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.249-255
• /
• 2013

Hydroxypropyl terminated PDMS was synthesized by the hydrosilylation reaction with allyl alcohol in the presence of Karstedt's catalyst. And them, an one-pot reaction with HDI isocyanurate trimer and hydroxyethyl methacrylate was conducted to give a silicone-modified urethane acrylate oligomer (PUA oligomer) having 9000 g/mol, weight average molecular weight. The synthesized PUA oligomer was characterized by using FT-IR and GPC. The UV-curable coatings were prepared by PUA oligomer blending with a reactive monomer (phenylthioethyl acrylate) under the different mole ratios. It was found that the refractive index of cured film increased when the reactive monomer was added but there was no relationship between the refractive index and amount of reactive monomer. Also, their transmittance for cured films was not change as increasing the content of reactive monomer.

• Korean journal of food and cookery science
• /
• v.32 no.1
• /
• pp.16-26
• /
• 2016

In this study, we aimed to develop functional vinegar with different levels of black garlic through two stages of fermentation. Black garlic vinegars were prepared from black garlic and water (w/w) mixed with 1:2 (BG3), 1:5 (BG6), 1:9 (BG9) and 1:11 (BG12), and adding the sugar by adjusting the soluble solids content to $14^{\circ}Brix$. The alcohol content of black garlic vinegar was 5.2-5.5% after 7 days of alcohol fermentation at $25^{\circ}C$. Acetic acid fermented was at $30^{\circ}C$ for 25 days and samples were taken at 3, 6, 9, 12, 15, 20 and 25 days. The pH of black garlic vinegar was not significantly different among the samples, but acidity was increased during fermentation. Total polyphenol contents showed irregular changes with the fermentation periods and were higher by black garlic content. At 25 days fermentation, total polyphenol contents were 18.96-56.56 mg/100 mL. Acetic acid content of black garlic vinegars was higher than other organic acids. S-allyl cysteine (SAC) contents of BG3 and BG6 were 13.03-14.54 and 1.69-2.20 mg/L, respectively. However SAC was not detected in BG9 and BG12. In 25 days fermented black garlic vinegar, the major mineral was K with a content ratio of 61-68% of total minerals. The DPPH and ABTS radical scavenging activity of 25 days fermented black garlic vinegar were stronger at higher black garlic content.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.109-113
• /
• 2011

${\alpha},{\omega}$-Hydroxypropylpoly(dimethylsiloxane) was prepared from the reaction of a ${\alpha},{\omega}$-hydrogen polydimethylsiloxane with an allyl alcohol. MPE-g-poly(dimethylsiloxane) copolymer (MPES) was prepared from the graft copolymerization of MPE with ${\alpha},{\omega}$-hydroxypropyl group terminated PDMS. MPES/HDPE/EtO-CNT need to varify was prepared from the compounding of MPES, HDPE, and surface treated MWCNT with 4-ethoxybenzoic acid at $180^{\circ}C$. Melting point of the MPES/HDPE/EtO-CNT composite was decreased from 130 to $129^{\circ}C$ as increasing the content of MWCNT 10 to 20 wt% in the composite PTC characteristic of the MPES/HDPE/EtO-CNT composite was appeared at $120^{\circ}C$ as abruptly increasing the electrical resistivity at this temperature. The heighest PTC intensity of MPES/HDPE/EtO-CNT compsite at 10 wt% loading of EtO-CNT was 1.9.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.927-933
• /
• 2022

We synthesized (C₁₀H₈N₂H)₂Cr₂O₇, The structure of the product was characterized with FT-IR(infrared) and elemental analysis. The oxidation of benzyl alcohol by (C₁₀H₈N₂H)₂Cr₂O₇ in organic solvents showed that the reactivity increased with the increase of the dielectric constant. The oxidation of alcohols was examined by (C₁₀H₈N₂H)₂Cr₂O₇ in DMF, acetone. As a resuit, (C₁₀H₈N₂H)₂Cr₂O₇ was found as efficicent oxidizing agent that converted benzyl alcohol, allyl alcohol, primary alcohol and secondary alcohols to the corresponding aldehydes or ketones(65%~95%). The selective oxidation of alcohols was also examined by (C₁₀H₈N₂H)₂Cr₂O₇ in DMF, acetone. (C₁₀H₈N₂H)₂Cr₂O₇ was selective oxidizing agent(15%~95%) of benzyl alcohol, allyl alcohol and primary alcohol in the presence of secondary ones. In the presence of DMF solvent with acidic catalyst such as H₂SO₄. (C₁₀H₈N₂H)₂Cr₂O₇ oxidized benzyl alcohol(H) and its derivatives. The Hammett reaction constant(ρ) was -0.69(308K). The observed experimental data were used to rationalize the hydride ion transfer in the rate determining step.

• Applied Biological Chemistry
• /
• v.44 no.1
• /
• pp.12-19
• /
• 2001

The major volatiles from Allium species were found to be sulfide compounds and the ratio of sulfide to volatiles was 66.1% in garlic, 66.1% in scallion, 62.3% in green onion, 39.2% in onion, and 4.2% in chive. Trace of cyclooctasulfur was found to be present among the volatiles. The most oviposition of 17.2% occurred at diallyl sulfide and the least of 0.8% at acetylthiophene whereas the most oviposition of 43.3% occurred at ethyl alcohol if concentration was 100%. Among the organic solvents used for dilution, ethyl alcohol received the highest 52.5% of oviposition and ether the lowest of 5.9%. Furfuryl mercaptan which is also one of the volatiles, received 46.9% of oviposition. For oviposition site, D. antiqua preferred sulfides at near 1%, ethyl alcohol at high, and other volatiles at various concentrations. At 100% concentration, most volatiles except dimethyl disulfide and ethyl alcohol received less oviposition than the control which was watered sand with no volatiles added.

• Journal of Photoscience
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2003

The results of recent work on the dye-sensitized photooxygenation of sulfides is discussed. In the case of dialkyl sulfides, the weakly bonded adduct initially formed with singlet oxygen (the persulfoxide) decays unproductively unless protonation by an acid (an alcohol or a carboxylic acid) facilitates its conversion to the sulfoxide. The effect is proportional to the strength of the acid (eg., less than 0.1 % chloroacetic acid in benzene is sufficient for maximal efficiency) and corresponds to general acid catalysis, suggesting that protonation of the persulfoxide occurs. On the other hand, with sulfides possessing an activated hydrogen in ${\alpha}$ position (eg., benzyl and allyl sulfides), hydrogen transfer becomes an efficient process in aprotic media and yields a S-hydroperoxysulfoniumm ylide, possibly arising from a conformation of the persulfoxide that is different from the one protonated in the presence of acids. Calculations on some substituted sulfides support this hypothesis. This process, which leads to C-S bond fragmentation with formation of an aldehyde, may be viewed as a general method for the preparation of aryl and heteroaryl aldehydes. In this effort, mechanistic studies offered new hints on the structure of the intermediate persulfoxide.

• Archives of Pharmacal Research
• /
• v.28 no.2
• /
• pp.129-141
• /
• 2005

(-)-Fumagillol (1), a hydrolysis product of fumagillin, has been synthesized by several group from commercially available 1,2:5,6-di-O-isopropylidene-${\alpha}$-D-allofuranose in a highly stereoselective manner. Chiral centers on C5 and C6 came from D-allofuranose and the asymmetric center on C4 was accomplished by 1,3-chirality transfer using the Claisen rearrangement on a chiral allyl alcohol. Chirality, which is necessary on an epoxide consisting of the spiro-ring system, was diastereoselectively constructed by the well-known reaction, intramolecular ester enolate alkylation (IEEA), which showed that this reaction can be applied to the alpha-alkoxy ester system. The epoxide on the side chain was regioselectively introduced by the difference between the number of substituents on the vinyl groups. This accomplishment proved that IEEA can be a useful tool for the synthesis of complex molecules.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.78-83
• /
• 1998

It's necessary to develope a facile methodology forming ${\alpha}$-altropyranosidic linkage, for the synthesis of trisaccharide repeating unit of O-antigenic part of Campylobacter jejuni gram negative bacteria. In this paper, the effective synthesis of disaccharides containing ${\alpha}$-altropyranosidic linkage by 1,2-trans glycosidation of allal derivatives was discussed. 4, 6-O-Benzylidene-3-O-(t-butyldimethylsilyl)-D-allal was treated with DMDO (3,3-dimethy ldioxirane) to yield 1,2-anhydro-4, 6-O-benzylidene-3-O-(t-butyldimethylsilyl)-${\beta}$-D-altropyranose. The reaction of 1,2-anhydro-4, 6-O-benzylidene-3-O-(t-butyldimethylsilyl)-${\beta}$-D-altropyranose with allyl alcohol gave allyl 4, 6-O-benzylidene-3-(t-butyldimethylsilyl)-${\alpha}$-D-altropyranoside quantitatively, and reactions with glucals were also successful to prepare ${\alpha}$-altropyranosodic disaccharides. It is convinced that 1,2-trans glycosidation of allal derivatives should be an attractive choice for preparing oligosaccharides containing ${\alpha}$-altropyranosidic linkages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.378-384
• /
• 2018

$C_9H_7NHCrO_3Cl$ was synthesized by reacting $C_9H_7NH$ with chromium (VI) trioxide. The structure of the product was characterized by FT-IR (Fourier transform infrared) spectroscopy and elemental analysis. The oxidation of benzyl alcohol by $C_9H_7NHCrO_3Cl$ in various solvents showed that the reactivity increased with increasing dielectric constant(${\varepsilon}$) in the following order: DMF (N,N'-dimethylformamide) > acetone > chloroform > cyclohexane. The oxidation of alcohols was examined by $C_9H_7NHCrO_3Cl$ in DMF. As a result, $C_9H_7NHCrO_3Cl$ was found to be an efficient oxidizing agent that converts benzyl alcohol, allyl alcohol, primary alcohols, and secondary alcohols to the corresponding aldehydes or ketones (75%-95%). The selective oxidation of alcohols was also examined by $C_9H_7NHCrO_3Cl$ in DMF. $C_9H_7NHCrO_3Cl$ was the selective oxidizing agent of benzyl, allyl and primary alcohol in the presence of secondary ones. In the presence of DMF with an acidic catalyst, such as $H_2SO_4$, $C_9H_7NHCrO_3Cl$ oxidized benzyl alcohol (H) and its derivatives ($p-OCH_3$, $m-CH_3$, $m-OCH_3$, m-Cl, and $m-NO_2$). Electron donating substituents accelerated the reaction rate, whereas electron acceptor groups retarded the reaction rate. The Hammett reaction constant (${\rho}$) was -0.69 (308K). The observed experimental data were used to rationalize hydride ion transfer in the rate-determining step.