• Journal of Environmental Health Sciences
• /
• v.11 no.2
• /
• pp.65-75
• /
• 1985

Microorganisms capable of utilizing diaminododecane containing amine groups diterminally were isolated from the soil by enrichment culture. One strain of these isolated strain, designated as EL-0112L, was selected for this study. The results of this study were as follows. 1. This isolated strain EL-0112L was identified as Microbacterium, from the results of morphological, cultural, and biochemical tests. This isolated strain was named temporarily Microbacterium sp. EL-0112L for convenience. 2. Microbacterium sp. EL-0112L was tested for ability to utilize different kinds of substitued alkanes containing cyan, amine, chloro, and thiol groups(monoterminally or diterminall substituted) as carbon source. Pentamethylenediamine, hexamethylenediamine, n-decane, laurylamine, and alkane derivatives containing cyan, chloro, and thiol groups were not utilized by Microbacterium sp. EL-0112L. 3. The alkane derivatives that did not serve as growth substrates were tested further in oxidation tests using resting cell preparation of Microbacterium sp. EL-0112 L. Alkane derivatives containing cyan, chloro, thiol groups, and n-decane were oxidized by Microbacterium sp. EL-0112 L. It is possible that this isolated strain is also able to degrade their substituted counterparts since they are structually similar to diaminododecane. The remarkable substrates that were being oxidized were dichlorodecane, and 1-dodecanethiol. Microbacterium sp. EL- 0112L could not oxidize pentamethylenediamine, and hexamethylenediamine. 4. The metabolic products formed from diaminododecane by Microbacterium sp. EL-0112 L were acid compound containing carboxyl group and not containing amine group. On the thin layer chromatography, Rf values of these metabolic products were different from that of the product formed by Corynebacterium sp. EL-0112L. These results suggested the specificity of diaminododecane as carbon source.

• Journal of the Korean Society of Costume
• /
• v.47
• /
• pp.89-100
• /
• 1999

This study was carried to a textile conservation process included washing effect fiber analysis such as fiber identification fabric density and thickness color fading and of extracted soils. the following results were obtained. 1. AS a result of investigating to fabric surfaces by S.E.M all of cleaning methods wet cleaning-solvent cleaning in charge system were effective to remove soils from fabrics. 2. The buried fabrics were made of silk few of them were cotton ramie and hemp. 3. According to fabric density and thickness used fabrics were almost medium weight fabrics. 4. Low values of L, a, b indicated that the colors of these fabrics were faded to yellow and brown. 5. The soil components were hydrocarbon-alkane group alkyl alcohol and ketone group.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.2
• /
• pp.169-177
• /
• 2001

The concentrations of ambient volatile organic compounds (VOC) were investigated from the Kwangju area. A total number of sixty six sample were collected and analyzed during day/night periods from June to September 1999. Each of the canister sample ws analyzed for alkane and aromatic compounds using a GC/MSD sys-tem. The concentration of VOC in mean day/night time, when compared, was in the order: toluene(16%)> isobu-tane(14%)= acethylene(14%)> propane(12%)> ethane(11%)> butane(9%). The VOC concentrations were gene-rally higher during the daytime than the nighttime. The VOC with light weight(such as an alkane group, $C_2$-C(suh)5) showed generally higher concentrations during day/nighttime than the VOC with heavy weight (such as an aromatic group). High correlations were among the VOC emitted from the similar sources.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.247-256
• /
• 2012

Stable carbon isotope ratio of oil components are known to be unaffected by weathering processes and thus has been widely used to determine the origin of spilled oil. In this study, molecular index and composition of stable carbon isotope in 15 crude oils and petroleum product were analyzed and used as oil fingerprints to determine the discriminating power of each fingerprinting method among target crude oils. Through the fingerprints of alkane distribution only Bintulu and B-C(1%) were distinguishable from other crude oils. The pristane/phytane ratio can classify the crude oils into three groups but differentiation of crude oils within a group was impossible using the ratio. The crude oils of A.L., A.S.L., Foroozan and B-C(1%) were differentiated from the other oils using PAH source recognition indexes of C2D/C2P and C3D/C3P. The usage of 4-mD/1-mD and 2/3-mD/1-mD ratio was able to distinguish A.S.L., Bintulu and Oman from the other crude oils. However the PAH source recognition ratios in the other crude oils were similar and thus they were impractical to be used for source identification among the target crude oils. Stable carbon isotope ratios of alkanes were able to uniquely specify each crude oil in the plot of ${\delta}^{13}C_{C21}$ and ${\delta}^{13}C_{C25}$ except A.L., A.M., Qatar-Marine, B-C(1%). The oil fingerprinting method using stable carbon isotope ratios of individual alkane compounds showed more discriminating power among the target crude oils than the conventional source recognition indexes of PAHs or alkanes.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.224-231
• /
• 2010

In GvdW EOS, a recently presented paper, shows that the characteristic status for spherical non-linear particle, of which the mutual behavior is known to be vdWf(van der Waals force) only, could be described well enough in the critical region. However, in current papers, analysis has not been done on GvdW about whether it is accurate or not, even for the particles in the linear form or those with the additional mutual behavior such as static-electricity, so there's some argument about the wide use of that. Therefore, in this paper, for the simulation in the critical region of Normal-alkane group(R=methane, ethane, propane, butane) which are the particles that has a linear charateristic and Normal-amine group($RNH_2$, R=methyl-, ethyl-, propyl-amine) where static-electricity is extremely shown, GvdW parameter values about these particles are defined, and based on this simulation, we compared results to the current EOS presented recently, and analyzed them. Through the simulation, it was shown that in case of Normal-alkane group and Normal-amine group molecules, GvdW presents an accurate critical region characteristic which is far more close to the measurement compared to current EOSs. Especially for butane with big amount in molecules, we found out that only GvdW EOS can reach close enough to the critical point.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.405-412
• /
• 2018

Three types of bis[3-(dialkyloxylphosphorothionyl) thio-2-methylpropanyloxy]alkane (BAPA) drived from alkane diol were synthesized. The principal chain of each BAPA had a different carbon number, i.e., 6, 9, and 11. The three types of synthesized BAPA were compared to zinc dialkyl dithiophosphates (ZDDPs) in terms of abrasion resistance. A four-ball test was conducted to evaluate the anti-abrasion performance of the synthesized BAPA according to the length of the principal carbon chain. Each product was added to an additive at a concentration of 1% of the base oil weight, and the wear scar diameter (WSD) was measured as 0.472, 0.459, and 0.480 mm, respectively. Among the BAPA compounds, dialkyl dithiophosphoric acid (DDP), which is the side chain of bis[methacryloyloxy] nonane (BMOO9), was synthesized by varying the carbon number, i.e., 4, 8, and 12, and subsequently the 4-ball test was carried out. The WSD was determined as 0.537, 0.459, and 0.531 mm, respectively. As a result, it was found that when a side chain is short, a thin film is formed. In contrast, a long side chain hindered the formation of a film, and hence the best result was achieved when the carbon number was 8. As for the ZDDPs, the WSD was determined to be 0.563 mm, when measured under the same conditions. The measurements confirm that the synthesized BAPA compounds are superior to the ZDDPs as abrasion resistance additives.

• Textile Coloration and Finishing
• /
• v.5 no.2
• /
• pp.109-116
• /
• 1993

Synthesis and liquid-crystallinites of thermotropic polyamides and copolyamides were investigated. Thermotropic polyamides and copolyamides containing a flexible spacer in the backbone were obtained by the two or three components melt polycondensations of 4,4'-dicarboxy-${\alpha}$${\omega}$-diphenoxy alkane as an A components, 4,4'-diacetoamido-3,3' dimethoxybiphenyl as a B, 1,4-diacetoamido-benzene (diacetylated p-phenylenediamine) was used as another amide-group-forming minomer. The content of the amide groups in the thermotropic polyamide and Copolyamide widely varied depending on the structure of the amide-group forming diacetoamido monomers. A polymer (9CLDI) showed a typical nematic texture between 218$^{circle}C$ ($T_m$) and 345$^{circle}C$($T_i$) The melting points of the members of this series of polymers increased with decreasing methylene spacer. The polymer structure and mesmorphic nature were examined by solid and solution ${^13}C$-NMR spectroscopy, cross polarizing microscopy with a hot stage.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2006

The analysis of functional population and its dynamics on the environment is essential for understanding bioremediation in environment. Here, we report a method for oligonucleotide microarray for the monitoring of aliphatic and aromatic degradative genes. This microarray contained 15 unique and group-specific probes which were based on 100 known genes involved pathways in biodegradation. Hybridization specificity tests with pure cultures, strain Pseudomonas aeruginosa KCTC 1636 indicated that the designed probes on the arrays appeared to be specific to their corresponding target genes. It was found that the presence of 8 genes encoding alkane, naphthalene, biphenyl, pyrene (PAH ring-hydroxylating) degradation pathway could be detected in oil contaminated soil sample. Therefore, the findings of this study strongly suggest that oligonucleotide microarray is an effective diagnostic tool for evaluating biodegradation capability in oil contaminated subsurface environment.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.306-311
• /
• 2013

A series of liquid crystalline polyesters containing the 4-chloro benzoate group on the hydroquinone unit of rigid group were synthesized through solution polymerization of 2,5-di(4-chlorobenzoate)hydroquinones and 4,4'-dicarboxy-${\alpha},{\omega}$-diphenoxy alkane. The structure and properties for synthesized polymers were investigated by $^1H$-NMR, FT-IR, DSC, TGA, and POM. As result of investigations, The presence of the methylene group and bulky lateral groups in polymer chain have a great influence on the properties of polymers such as solubilities and thermal transitions. The optical textures of polymers revealed a weak birefringence in the melt and indicated that they form nematic mesophase. All polymers have very narrow mesophase temperature ranges.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1207-1210
• /
• 2003

The effect of solvent structure on the slope in the plot of ln K vs. solute carbon number was examined. It was found that the free energy of methylene group transfer from the gas phase into a solvent was always negative and that the absolute magnitude of interaction free energy between the methylene group and the solvent was always larger than the absolute magnitude of cavity formation free energy of the methylene group in the solvent. Thus, the slope in the plot of ln K vs. solute carbon number was always positive and its value decreases with increase of solvent polarity since the cavity formation energy of the CH₂ unit increases with increase of solvent polarity while the dispersive interaction energy of the CH₂ unit is virtually invariant. We also examined the effect of sequential addition of CH₂ unit to a solvent molecule upon ln K for three homologous series of solvents: n-alkanes, n-alcohols, and n-nitriles. Characteristic trends in the plots of ln K vs. solvent carbon number were observed for individual solvent groups. A decrease of ln K with solvent carbon number was observed for n-alkanes. An abrupt increase in ln K followed by levelling off was observed for n-alcohols while a final slight decrease in ln K after an abrupt increase followed by rapid levelling off was noted for n-nitriles. All of theses phenomena were found related to variation in cavity formation energy. It was clearly shown that a structural change of a polar solvent by sequential addition of CH₂ units causes an abrupt polarity decrease initially, then gradual levelling off, and finally, conversion to a virtually nonpolar solvent if enough CH₂ units are added.