• The Korean Journal of Food And Nutrition
• /
• v.6 no.1
• /
• pp.8-15
• /
• 1993

We have examined the utility of alkaline ionic water for processing water In order to compare with piped tap water in cooking rice, making kimchi, making bean curd, raising bean sprouts and parboiling spinach. And we have estimated the quality of them. The result of the examination was as follow. A rice cooked with alkaline ionic water had pale yellow color, and had good quality in polish, viscocity, taste, odour and retrogradation as compared with a rice cooked of piped tap water. In the case of a water kimchi, refreshing taste and other kinds of taste were good. Unpleasant taste and smell have decreased. Fresh colour of a Chinese cabbage were maintained long because of the prevention of destruction of chlorophyll. In the case of bean sprouts, sprouting rate was promoted up to 2∼3% during the period of 2∼3 days as compared with that treated with piped tap water And the growth state was good and the contents of vitamin C were high as compared with those with piped tap water. In the case of parboiling of green spinach, the alkaline ionic water helped keeping the chlorophyll of spinach. In the case of bean curd, soft taste, polish, smell and total taste were good. The Utility value of alkaline ionic water for the processing of soft bean curd was recognized by making it soften.

• Journal of Sericultural and Entomological Science
• /
• v.47 no.1
• /
• pp.36-40
• /
• 2005

This studies were carried out to develop the new silk degumming method by elelectrolyzed alkaline water on the silk degumming process. Using to this method, it could be collect pure sericin from the degumming water, because the degumming water by elelectrolyzed alkaline water was not contaminated by chemicals including soap. The range of elelectrolyzed alkaline water was pH 11.5 to 11.7 and maintained the first value for 8 days under the cool and closed conditions. The degumming ratio of silk was higher in elelectrolyzed alkaline water(pH 11.5~11.7)than that of soap and alkaline bath. When the pH value of elelectrolyzed alkaline water was adjusted at pH 11.0, the degumming ratio of silk was similar to that of soap and alkaline degumming. After degumming the pH value of degumming water decreased largely in the elelectrolyzed alkaline water compared to that of soap and alkaline bath. The tenacity and elongation of degummed silk by elelectrolyzed alkaline water was almost same those of soap and alkaline degumming for 90 min.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.129-135
• /
• 2016

This study is about ionic water generator filter Recently, a lot of people feel deep interest in health and drinking water. Evaluation of the stability of oxidation-reduced potential (ORP) using the filter of the alkaline water. This study utilizes the three filter of activated carbon, UF, carbon block in alkaline reduced water equipment. Passing the water to the filter is evaluated that the OPR values are stability in accordance with the change of the volume in the bucket. Alkaline reduced water equipment is a system that has the function of making the water reduction. This system is the values of the human body beneficial minerals and ORP are made in the functional water has a very low value than general water. Which has passed through the filter the water in the water negative ions and positive ions through the electrolytic. After electrolysis, the cathode side by water, including $Ca^+$, $K^+$, $Mg^+$, $Na^+$ water gets Alkaline Reduced Water containing the minerals beneficial to the human body. A positive electrode side is made of the organic materials that have an anion such as chlorine (Cl), phosphorus (P), sulfur(S). This experiment uses the Alkaline Reduced Water to adjust the magnitude of the voltage of the electrolysis in the Alkaline Reduced Water. That is 1st step(pH8) 2nd step (pH8.5) 3th step (pH9), 4th step (pH9.5) in the Alkaline Reduced Water and -1st step (pH6.0), -2nd step (pH5.0) used as the acidic oxidation water. When the water passes through the three filter in this system was evaluated whether the ORP values are changed and stabilized. When about 100 liters of water passing through the filter was confirmed that the ORP values are stability and evaluation.

• Clean Technology
• /
• v.18 no.4
• /
• pp.446-450
• /
• 2012

Strong alkaline electrolyzed water which is produced in cathode by electrolyzing the solution where electrolytes (NaCl, $K_2CO_3$ etc.) are added in diaphragm electrolytic cell, is eco-friendly and has cleaning effects. So, it is viewed as a substitution of chemical cleaner. In addition, strong alkaline electrolyzed water is being used by some Japanese automobile and precision parts manufacturing industries. When strong alkaline electrolyzed water is produced by using diaphragm electrolytic cell, it is necessarily produced at the anode side. Since strong acidic electrolyzed water produced is discarded when its utilization cannot be found, production efficiency of electrolyzed water is consequently decreased. Also, there is a weakness electrolytic efficiency is decreasing due to the pollution of diaphragm. In order to overcome this, non-diaphragm all-in-one electrolytic cell integrated with electrode reaction chamber and dilution chamber was applied. Strong alkaline electrolyzed water was produced for different composition of electrolytes, and their properties and characteristics were identified. In comparing the properties between strong alkaline electrolyzed water produced in diaphragm electrolytic cell and that produced in all-in-one electrolytic cell, the differences in ORP and chlorine concentration were found. In emulsification test to confirm surface-active capability, similar results were obtained and strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell was identified to be useable as a cleaner like strong alkaline electrolyzed water produced in diaphragm electrolytic cell. Strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell is thought to have sterilizing power because it has active chlorine which is different from strong alkaline electrolyzed water produced in diaphragm electrolytic cell.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.4
• /
• pp.61-65
• /
• 2007

In this research, we have developed a manufacturing process for seawater salt by horizontal spray drying technique using the deep ocean water and seaweed(sea tangle). Deep ocean water, strong acidic electrolyzed water and strong alkaline electrolyzed water were used as extraction solvent of seaweed. Sodium content in seaweed extract solution by strong alkaline electrolyzed water was 1.63(mg/g), which was 3.5 times lower than of seaweed extract by strong acidic electrolyzed water. Major mineral content(Na, K, Ca) in seawater salt by deep ocean water were higher than strong acidic electrolyzed water and strong alkaline electrolyzed water. On the contrary, Mg contents in seawater salt by deep ocean water were lower than strong acidic electrolyzed water and strong alkaline electrolyzed water. Based on the results of seawater salt production using seaweed, it is possible to make law-salt efficiently.

• Corrosion Science and Technology
• /
• v.8 no.3
• /
• pp.126-131
• /
• 2009

The interaction between wear and corrosion can significantly increase total material losses in water chemistry environment. The corrosive wear tests of a PWR steam generator tube material (Alloy 690) against the anti vibration bar material (409 SS) were performed at room temperature. The tests were performed in alkaline water chemistry conditions. NaOH solution was selected for test condition to investigate the corrosive wear effect of steam generator tube material in alkaline pH condition without other factors. The flow induced vibration can caused tube damage and the corrosion can be occurred by water chemistry. The test results showed that, in the alkaline solution at pH 13.9, the corrosion current density was increased about ten times than that in the distilled water. And wear rate at pH 13.9 was increased about ten times from that at neutral condition. However, the wear rate was decreased with time. The decrease would be attributed to the change in roughness of specimen or sub-layer of the worn surface with time. From microstructure observation, severe abrasive shape and several wear debris were found. From those results, it could infer that the oxide film on Alloy 690 changed to easily breakable one in the alkaline water, and then abrasion with corrosion became the main wear mechanism.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.3
• /
• pp.302-307
• /
• 2021

Polymer electrolyte membrane (PEM) electrolyzer or alkaline electrolyzer is required to produce green hydrogen using renewable energy such as wind and/or solar power. PEM and alkaline electrolyzer differ in many ways, instantly basic materials, system configuration, and operation characteristics are different. Building an optimal water hydrolysis system by closely grasping the characteristics of each type of electrolyzer is of great help in building a safe hydrogen ecosystem as well as the efficiency of green hydrogen production. In this study, the basic operation characteristics of a kW class alkaline water electrolyzer we developed, and water electrolysis efficiency are described. Finally, a brief overview of the characteristics of PEM and alkaline electrolyzer for large-capacity green hydrogen production system will be outlined.

• Journal of Environmental Health Sciences
• /
• v.22 no.1
• /
• pp.1-4
• /
• 1996

I have conducted two testings to find out which water is better for drinking water. First, I made 20 mM L-DOPA solutions by solving L-DOPA (3,4-Dihydroxyphenylalanine) in tap water, Waters' mineral water and reverse osmotic water. Then I measured activities after adding Tyrosinase (purifide enzyme, step 3), which was extracted from Salanum melongena(mad apple), in each L-DOPA solution. Second, I solved 0.1, 0.5 and 0.9% salt in each 20 mM L-DOPA distilled water to measure activity of each salt solution. The results of the testings are as follows: 1. 10 minutes after adding Salanum melongena(mad apple) tyrosinase in each L-DOPA solution, activity of Waters' mineral water was 0.867 tap water 0.777 and reverse osmotic water 0.742. 2. Activity of Waters' mineral water was higher than that of tap water by 10.4% and higher then reverse osmotic by 14.4%. 3. Activity of Waters' mineral water was much higher than that of 0.9% salt water by 41.8%. 4. The optimum pH of Salanum melongena (mad apple) tyrosinase is 9.0. Most enzymes working in the human metabolism are alkaline and body fluids' pH also alkaline. In conclusion, an alkaline water is believed better than an acidic water for drinking.

• Journal of Hydrogen and New Energy
• /
• v.22 no.4
• /
• pp.559-567
• /
• 2011

This paper deals with an economic evaluation of domestic low-temperature water electrolysis hydrogen production. We evaluate the economic feasibility of on-site hydrogen fueling stations with the hydrogen production capacity of 30 $Nm^3/hr$ by the alkaline and the polymer electrolyte membrane water electrolysis. The hydrogen production prices of the alkaline water electrolysis, the polymer electrolyte membrane water electrolysis, and the steam methane reforming hydrogen fueling stations with the hydrogen production capacity of 30 $Nm^3/hr$ were estimated as 18,403 $won/kgH_2$, 22,945 $won/kgH_2$, 21,412 $won/kgH_2$, respectively. Domestic alkaline water electrolysis hydrogen production is evaluated as economical for small on-site hydrogen fueling stations, and we need to further study the economic evaluation of low-temperature water electrolysis hydrogen production for medium and large scale on-site hydrogen fueling stations.

• Textile Coloration and Finishing
• /
• v.7 no.2
• /
• pp.9-16
• /
• 1995

When alkaline waste water of PET fabric is treated with sulfuric acid, undegradable material, crude TPA sludge is generated, so that treatment has a serious problem. The result of DMT synthesis using crude TPA sludge generated from PET alkaline waste water were as follows: 1. When crude TPA generated from alkaline waste water is reactioned with methanol under catalyst of sulfuric acid, pure DMT can be obtained. 2. In DMT synthesis from crude TPA, addition of copper sulfate can increase yield, and increasing the amount of sulfuric acid can shorten reaction time.