• KSBB Journal
• /
• v.6 no.1
• /
• pp.105-109
• /
• 1991

In separating alkaline protease from the bacteria (Bacillus licheniformis) fermentation broth using reverse micelle, effects of various factors;ionic strength, pH and surfactant concentration, on separation efficiency were studied. KCl controls the ionic strength. The lower KCl concentration was in the feed solution, the more protein and activity was recovered. The higher KCl concentration was in the stripping solution, the more protein and activity was recovered. Using sodium-di-2-ethylhexyl sulfosuccinate(Aerosol-OT or AOT) as a surfactant, the higher AOT concentration in the solvent, the more activity and protein were recovered. 0.1N NaOH and IN HCl were used to adjust pH. Maximum recovery of protein mass and activity were obtained at feed solution of pH 5.3. Maximum activity was recovered at stripping solution of pH 7.5

• Korean Journal of Environmental Agriculture
• /
• v.3 no.2
• /
• pp.16-22
• /
• 1984

This study was carried out to investigate the stability of dinobuton (2-sec-butyl-4,6-dinitrophenyl isopropyl carbonate) in distilled water and buffer solutions and its persistence in soils. When dinobuton was incubated at $30^{\circ}C$ and $60^{\circ}C$ in distilled water, the half-lives of dinobuton was 28 and 6 days, respectively. The decomposition of dinobuton was, therefore, faster at high temperature than at low temperature. The half-life of dinobuton was about 27 days in the acidic solution $(pH\; 4{\sim}6)$, whereas 10 and 4 days in the alkaline solutions of pH 9, and 10, respectively. Thus dinobuton was stable in acidic solution, and unstable in alkaline solution. Dinoseb (2-sec-butyl-4,6-dinitrophenol), which is produced in the degradation process of dinobuton, was produced in small amounts in distilled water and buffer solutions. The half-life of dinobuton in sterilized soil was about 16 days longer than in non-sterilized soil. Dinoseb was also more persistent in sterilized soil than in non-sterilized one.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.1
• /
• pp.16-22
• /
• 2024

The conventional degreasing process involves removing oil and contaminants at temperatures above 80℃, resulting in excessive energy consumption, increased process costs, and environmental issues. In this study, we aimed to find the optimal degreasing conditions for the pre-treatment process of electro-galvanizing cold-rolled steel sheets, conducted efficiently at room temperature without the need for a separate heating device. To achieve this, we developed a room temperature degreasing solution and a brush-type degreasing tool, aiming to reduce energy consumption and normalize the decrease in degreasing efficiency caused by temperature reduction. Alkaline degreasing solution were prepared using KOH, SiO₂, NaOH, Na₂CO₃, and Sodium Lauryl Sulfate, with KOH and NaOH as the main components. To enhance the degreasing performance at room temperature, we manufactured additives including sodium oleate, sodium stearate, sodium palmitate, sodium lauryl sulfate, ammonium lauryl sulfate, silicone emulsion, and EDTA-Na. Room temperature additives were added to the alkaline degreasing solution in quantities ranging from 0.1 to 20 wt.%, and the uniformity of degreasing and the adhesion of the galvanized layer were evaluated through Dyne Test, T-bending Test, OM, SEM, and EDS analyses. The results indicated that the optimal degreasing solution composition consisted of NaOH (30 g/L), Na₂CO₃ (30 g/L), SLS (6 g/L), and room temperature additives (≤1 wt%).

• Journal of Acupuncture Research
• /
• v.21 no.4
• /
• pp.237-249
• /
• 2004

유근피는 혈액청정작용과 혈액순환에 영향을 주는 성분으로서 골 손상의 처방전으로 자주 사용된다. 현재까지 유근피가 골재형성에 미치는 영향은 약리학적으로 불확실하였다. 이에 저자들은 본 연구에서 유근피를 약침액으로 제조하여 유근피 약침액이 골세포에 미치는 영향을 in vitro에서 연구하였다. 방법으로 인체의 골아전구세포osteoprecursor cells (OPC-1)를 각각의 다른 유근피 농도를 함유한 매체내에서 부화시키고 그에 따른 세포증식을 연구하였으며, 유근피 약침액의 농도가 $100{\mu}g/ml$ 미만이었을 때 OPC-1의 증식량은 증가되었다. 그러나 농도가 $180{\mu}g/ml$을 초과하였을 때는 약물의 독성에 의해서 OPC-1의 증식량이 확연히 억제되었다. 대부분의 처치에서 세포들이 cyclooxygenase-2 (Cox 2) 단백질에 대해서 매우 명백한 발현을 보여줬다. 배양과정 중에 유근피 약침액 농도 최소치인 $1.0{\mu}g/ml$에서 최대치인 $500{\mu}g/ml$까지 경미하게 강화된 띠를 나타내었다. 이와 같은 실험의 결과로 볼 때 유근피 약침액은 골세포의 증식활동, alkaline phosphatse(ALP) 활동 및 total protein 분비의 증가와 골세포내에서의 농도의존적 약침액 투여량에 따른 OPC-1의 독특한 type I collagen 합성에 직접적인 억제작용을 주는 것을 관찰할 수 있으므로 추후 이와 유사한 실험을 통한 보다 발전적인 연구가 이루어져야 한다고 사료되었다.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.3
• /
• pp.193-202
• /
• 2013

Geopolymer mortar compressed blocks were prepared using fly ash, ground granulated blast furnace slag, silica fume and metakaolin as binders and sand/quarry dust/pond ash as fine aggregate. Alkaline solution was used to activate the source materials for synthesizing the geopolymer mortar. Fresh mortar was used to obtain the compressed blocks. The strength development with reference to different parameters was studied. The different parameters considered were fineness of fly ash, binder components, type of fine aggregate, molarity of alkaline solution, age of specimen, fluid-to-binder ratio, binder-to-aggregate ratio, degree of saturation, etc. The compressed blocks were tested for compression at different ages. It was observed that some of the blocks attained considerable strength within 24 h under ambient conditions. The cardinal aim was to analyze the experimental data generated to formulate a phenomenological model to arrive at the combinations of the ingredients to produce geopolymer blocks to meet the strength development desired at the specified age. The strength data was analyzed within the framework of generalized Abrams' law. It was interesting to note that the law was applicable to the analysis of strength development of partially saturated compressed blocks when the degree of saturation was maintained constant. The validity of phenomenological model was examined with an independent set of experimental data. The blocks can replace the traditional masonry blocks with many advantages.

• 보존과학연구
• /
• s.6
• /
• pp.48-57
• /
• 1985

This report described the corrosion structure of excavated iron artifacts in terms of simple model based on the knowledge of the corrosion process. (Fig.1)(Table 1,2)In storing the objects, there are basically three ways in which they either break in wedges, flakes and dish-shaped flakes. Completely mineralized objects or those with only a small iron core tend to break into wedges and more solid objects either split small dish-shaped flakes or large flat ones.(Fig. 2,3,4)There are two ways, therefore, to prevent this from happening. One is to keep the artifacts rigorously dried in Silica-gel, never allowing the relative humidity to rise. This is feasible which the artifacts are in store but causes great difficulty if they are wanted for museum display. Because they still contain $ FeCl _2$ they are always at risk ; they contain the seeds of their own destruction. The other alternative is to use of washing process to dissolve out the $ FeCl _2$. In this connection, many different methods to stabilize the artifact have been employed; boiling iron in frequent changes of water, soaking in Na-sesquicarbonate solution, soaking in alkaline Na-sulphite solution. In this report, introduced the alkaline sulphite method by the N.A. North and C.Pearson.Finally, Let me extend my thanks to Ancient Monument Lab., Museum of London Conservation Lab., British Museum Conservation Div. and National Maritime Museum Conservation Lab. who have helped me and made many valuable suggestions.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.32-38
• /
• 1994

The methods in wood processing are so limited at present that a scope of its utilization is restricted. This often makes wood itself less valuable as a material comparing with other materials, that is, plastics, metals, and glass. Such differences are due to a lack of plasticity in wood, i.e. it cannot be melted, dissolved, or softened sufficiently for molding. However, once plastic properties are added to wood, it becomes more useful material. This further broadens the method in wood processing to a variety of fields. In this way, wooden material which is limited in use can be modified into a high quality product with additional value. Furthermore, utilization of wastes from wood, for example, would be made viable. In this study, thermoplasticization was carried out by benzylation of wood(sawdust). Various factors those affect the reaction were tested to produce benzylated wood with different degrees of substitution. Reaction temperature and time were the quite important factors. Optimum reaction temperature was 110$^{\circ}C$, and weight percent gains(WPG) of final products increased gradually with the increase of reaction time. The pretreatment (or preswelling) of wood with alkaline solution had a critical effect on benzylation. and the concentration of alkaline solution should be above 30% to obtain high weight percent gain. The thermal flow temperature of the benzylated wood decreased with the increase in weight percent gain, that of 80% weight percent gain is about 200$^{\circ}C$.

• Corrosion Science and Technology
• /
• v.17 no.3
• /
• pp.116-122
• /
• 2018

The secondary coolant of a nuclear power plant has small amounts of various impurities (S, Pb, and Cl, etc.) introduced during the initial construction, maintenance, and normal operation. While the concentration of impurities in the feed water is very low, the flow of the cooling water is restricted, so impurities can accumulate on the Top of Tubesheet (TTS). This environment is chemically very complicated and has a very wide range of pH from acidic to alkaline. In this study, the characteristics of the oxide and the mechanism of stress corrosion cracking (SCC) are investigated for Alloy 690 TT in alkaline solution containing Pb, Cl, and S. Reverse U-bend (RUB) specimens were used to evaluate the SCC resistance. The test solution comprises 3m NaCl + 500ppm Pb + 0.31m $Na_2SO_4$ + 0.45m NaOH. Experimental results show that Alloy 690 TT of the crevice environment containing Pb, S, and Cl has significant cracks, indicating that Alloy 690 is vulnerable to stress corrosion cracking under this environment.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4122-4126
• /
• 2012

Cellulose-graft-poly (L-lactide) (cellulose-g-PLLA) was successfully prepared via ring-opening polymerization (ROP) by using 4-dimethylaminopyridine (DMAP) as an organic catalyst in an ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl). The structure and morphology of the polymer was characterized by nuclear magnetic resonance (NMR) and transmission electron microscope (TEM). From wide-angle X-ray powder diffraction (WAXD) and degradation test (by acid, alkaline, PBS and enzyme solution), changes in the crystalline structure as a result of degradation was also investigated. The results indicated that materials which have low degree of crystallinity showing higher degradability, however, in acid liquor, enzyme solution, alkaline liquor and PBS system, the degradation rate of the polymer decreased by the above sequence. Moreover, with the further increase of graft degree of this material, its degradation degree decreased.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.3-10
• /
• 2018

Tungsten is a metal with high melting point and used as a raw material for the production of super alloys. Tungsten exists as $WO{_4}^{2-}$ in alkaline solution. As solution pH decreases, polymerization reaction of $WO{_4}^{2-}$ occurs to result in the precipitation of tungstic acid. The hydrometallurgical process for the recovery of tungsten from ores or secondary resources can be classified as acid and alkaline leaching. In selecting a process for the recovery of pure tungsten from secondary resources, the nature and concentration of impurities in the secondary resources and the manufactured tungsten materials should be considered.