• Journal of the Korean GEO-environmental Society
• /
• v.13 no.9
• /
• pp.69-74
• /
• 2012

This study investigated the TNT decomposition by the treatment of alkaline hydrolysis. To obtain this objecitive, spectrum shift characteristics, pH effect, kinetics, and product analysis were examined during the alkaline hydrolysis by means of hydroxide ions. At pH = 12, an aqueous solution of TNT was changed into yellow-brown coloring, in which its absorbances were newly increased in a range of wavelength 400-600 nm. From the kinetic data, pseudo-first-order rate constant in a excess of hydroxide ion, in contrast to TNT concentration, was $0.0022min^{-1}$, which means that the reaction rate between TNT and hydroxide ion can be very slow, and that 1,047 min is necessary to achieve a 90% reduction of the initial TNT. In products analyses, nitrite ions and formic acid were mainly produced by the alkaline hydrolysis, nitrate ions and oxalic acid as minor products were generated.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.3
• /
• pp.23-29
• /
• 1986

Alakline peroxide pretreatment for the delignification of poplar wood was performed. sinceit is a simple and efficent method for enhancing the enzymatic digestibility of wood residues. Approximately one-half of their lignin and most of the hemicellulose present in poplar wood were removed when the wood sawdust was reacted at 25$^{\circ}C$ for 100 hrs in an alkaline solution (pH 11.5) of 1% peroxide. The rate of decomposition as well as the saccharification efficiency were enhanced up to 350% and 260% respectively in comparision with those of the controll. This enhancement is comparable with that pretreated with 1% sodium hydroxide and 20% peracetic acid successively. The advantages of alkaline peroxide as delignifying agents against other chemicals were also discussed.

• Food Science of Animal Resources
• /
• v.34 no.3
• /
• pp.307-315
• /
• 2014

pH adjustment would be of advantage in improving the water holding capacity of muscle proteins. The objective of this study was to evaluate the addition of fish sarcoplasmic protein (SP) solution, which was adjusted to pH 3.0 or 12.0, neutralized to pH 7.0, and lyophilized to obtain the acid- and alkaline-treated SP samples, on the functional properties of the chicken myofibrillar protein induced by microbial transglutaminase (MTG). The solubility of alkaline-treated SP was higher than that of the acid counterpart; however, those values of the two pH-treated samples were lower than that of normal SP (p<0.05). All SP solutions were mixed with myofibrillar proteins (MP) extracted from chicken breast, and incubated with MTG. The shear stresses of MP with acid- and alkaline-treated SP were higher than that of normal SP. The thermal stability of MP mixture reduced upon adding SP, regardless of the pH treatment. The breaking force of MP gels with acid-treated SP increased more than those of alkaline-treated SP, while normal SP showed the highest value. The MP gel lightness increased, but cooking loss reduced, with the addition of SP. Smooth microstructure of the gel surface was observed. These results indicated that adjusting the pH of SP improved the water holding capacity of chicken myofibrillar proteins induced by MTG.

• Journal of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.416-423
• /
• 1973

Formation of the complexes of alkaline earth metal ions with malonate and o-phthalate ions in aqueous, ethanol-water and acetone-water solutions (20% by volume) was studied at room temperature by the equilibrium ion exchange technique. This technique involved the measurements of distribution of radioactivity between cation exchange resin(Ion Exchange Resin CGC 241) and solution phases after the radioactive metal ions were equilibriated with the cation exchange resin in the presence of malonate or o-phthalate ions of varying concentrations. The pH of the solutions was controlled to 7.2~7.5, and the ionic strength of the solutions was kept at 0.10~0.11. The results of the present study indicated that the alkaline earth metal ions formed one-to-one complexes with the dibasic organic acids in all solvent systems examined. The present study showed that the relative stabilities of the complexes increased in the order: $Ba^{++}\;<\;Sr^{++}\;<\;Ca^{++}$ complexes. It was also observed that the relative tendency of the o-phthalate ion for the complex formation was somewhat greater than that of malonate ion in each solvent system. Furthermore, it was noted that the complexes were formed more readily in the mixed solvent than in the aqueous solution.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.6
• /
• pp.549-558
• /
• 2018

The overall efficiency depend on the overpotential of the oxygen evolution reaction in alkaline water electrolysis. Therefore, it is necessary to research to reduce the oxygen evolution overpotential of electrodes. In this study, Ni-Zn-Fe electrodes were prepared by electroplating and the surface area was increased by Zn leaching process. Electroplating variables were studied to optimize the plating parameters(electroplating current density, pH value of electroplating solution, Ni/Fe content ratio). Ni-Zn-Fe electrode, which is electroplated in a modified Watts bath, showed 0.294 V of overpotential at $0.1A/cm^2$. That result is better than that of Ni and Ni-Zn plated electrodes. As the electroplating current density of the Ni-Zn-Fe electrode increased, the particle size tended to increase and the overpotential of oxygen evolution reaction decreased. As reducing pH of electroplating solution from 4 to 2, Fe content in electrode and activity of oxygen evolution reaction decreased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.3
• /
• pp.130-136
• /
• 1981

Rice hull was reduced to ash by carbonization grades to illcuidate alkalinity increase and extract of inorganic nutrients in the rice hull charcoal. Alkaline reaction of water extraction was neutral at less carbonized charcoal, but much carbonized ash from 65% weight loss reached over 10 of pH value, also origin shape of rice hull was maintained until near 65% carbonized grade. Therefore, physical properties sustained good condition for seedling bed. The more charcoal carbonized to ash, the pH value and concentration of inorganic nutrient in their extracts were increased gradually. Nitric acid concentrations for neutralizing extract from charcoal were stronger in proportion to the carbonized grade but 0.1 N nitric acid solution was very reasonable to neutralize the 65% carbonized charcoal for mixing with heavy texture acidy soil(pH 5.3) of uncultivated deep horizon to transplant the tobacco seedlings. Volume ratio mixing for seedling bed is adequate at five of ash to one of acid solution. Neutralization with nitric acid solution also accelerated extraction of the inorganic nutrient in rice hull ash. Tobacco seedlings grown on bed mixed with neutralized rice hull charcoal and soil had shown better results on the agronomic measurement than alkaline ash bed, and phosphorus and cations were uptaken more amounts.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.4
• /
• pp.448-453
• /
• 2006

Porous Co-P catalysts electroplated on Cu in chloride based solution with an addition of $NaH_2PO_2$ and glycine were developed for hydrogen generation from alkaline $NaBH_4$ solution. The microstructures of the Co-P catalysts and their hydrogen generation properties were analyzed as a function of cathodic current density and plating time during the electrodeposition. Amorphous Co-P electrodeposits with porous structure was formed on Cu at cathodic current density of $0.05\;A/cm^2$, and showed very high hydrogen generation rate in alkaline $NaBH_4$ solution due to an increase in the surface area of the catalyst as well as the catalytic activity. The Co-P catalyst, which was obtained at cathodic current density of $0.05\;A/cm^2$ for 5 min, exhibited the best hydrogen generation rate of 2290 ml/min.g-catalyst in 1 wt. % NaOH+10 wt. % $NaBH_4$ solution at $30^{\circ}C$.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.63-67
• /
• 2014

Gallium is an important material and is used by industry of oxide semi-conductor and LED chip. However, the most of the gallium-containing waste resources became outflow abroad and the most of which is imported from oversea by following technical problem and low circulation rate. In this research, the recovery of high purity Gallium metal from Gallium scrap, which containing about 30% of Gallium, was investigated by using hydro-metallurgical process. As pretreatment, the Gallium scrap was pulverized and leached by strong acid such as hydro chloric acid. At the leached solution, Indium was separated as an Indium sponge by substitution reaction and then Gallium and Zinc hydroxide separated and filtrated using strong alkaline solution such as sodium hydroxide by precipitation method. Also, Gallium metal and Zinc metal was recovered by electrowinning method. To make an electrolytic solution, Gallium and Zinc hydroxide was leached by strong alkaline solution. Finally, High purity Gallium metal was recovered by vacuum refining process to remove the Zinc impurity.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.248-253
• /
• 1998

The adsorption and separation behaviors of alkali, alkaline earth and transition metal ions using a poly-dibenzo-18-crown-6 were investigated in aqueous solution. The adsorption degree(E) and distribution ratio(D) of alkali, alkaline earth metal ions were Li(I)$t_R$) of metal ions were affected by the adsorption degree(E) and distribution ratio(D). This results showed good separation efficiency of K(I), Sr(II), Ag(I) and Pb(II) from the mixed metal solution.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.794-801
• /
• 1995

To connect the driver IC and Al coated glass, a method has been developed to plate electrolessly Ni on Al/PR system. It Is necessary to pretreat Al to remove oxide film before plating. In order to find pretreatment process which does not damage photoresist or glass, alkaline and fluoride zincate process have been investigated. Because photoresist and aluminum thin film can easily dissolve in alkaline solution, it is considered that the fluoride zincate process was a suitable one. After immersion in the zincate solution containing 1.5 g/$\ell$ ammonium bifluoride and 100 g/$\ell$ zinc sulfate, electroless nickel plating could be performed. The additive in the zincate solution and thiourea in the plating solution increased smoothness of the plated surface. Acld dip could improve the uniformit of the surface.