• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.357-361
• /
• 2001

The possibility of producing Cr$_2$O$_3$powder from waste magnesia-chromium refractory was investigated by sulfuric acid reaction, alkali fusion, water leaching & purification and heat treatment. The effects of temperature, the amount of NaOH added and the flow rate of air on chromium extraction efficiency in an alkali fusion step were investigated. The fusion product was leached with methanol to solve free-NaOH, and then leached with water to produce a Na$_2$CrO$_4$solution. The purity of chrome(Ⅵ) oxides, prepared both from monochromate with an impurity content and monochromate purified with $CO_2$were also examined. The purified monochromate solution was reduced from Cr(Ⅵ) to Cr(III) with NaHSO$_3$solution. The reduced solution was neutralized with NaOH to produce Cr(OH)$_3$. Water washing was treated to eliminate Na$_2$SO$_4$from neutralized Cr(OH)$_3$slurry. The washed Cr(OH)$_3$was dried and thermally treated to produce Cr$_2$O$_3$powder. The properties like lightness and hue of Cr$_2$O$_3$fabricated in this study were L=47.47, a=-14.40 and b=17.21.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.79-87
• /
• 2007

This study investigated the effects of lacquer-finishing to prevent discoloration of coloring chestnut wood coated with natural dyes from deteriorating factors such as lights (indoor, 500 lux and outdoor, 50,000~70,000 lux), acid, alkali, and heat through measurement of color difference. Lacquer-finishing coating contributed to protection of intrinsic color of the natural dyeing woods in spite of severe treatment. In particular, dyeing liquor with alkali pH played a great role in prevention of light discoloration.

• Korean Journal of Food Science and Technology
• /
• v.17 no.3
• /
• pp.180-185
• /
• 1985

The alkali refined rice bran oil (ARBO) and the esterified rice bran oil (ERBO) with glycerol were compared for their thermal stabilities at $150^{\circ}C$ and $180^{\circ}C$, respectively. The acid value gradually increased in ARBO during heating period but increased slowly in ERBO-2 and declined gradually in ERBO-1. The peroxide value was somewhat fluctuated during heating period, and the maximum peroxide value in all samples was 13.3 meq/kg. TBA value was sharply increased for the first 10 hr. heating and slowed down thereafter for all samples but ERBO were intensely colored after the heat treatment. The TG ratio of the oils after 90 hr. heating was not different at $150^{\circ}C$ but ERBO was 2-7% higher ratio of TG than ARBO at $180^{\circ}C$. The oxidative stability of ARBO was twice higher than ERBO according to the result of active oxygen test.

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.535-539
• /
• 2006

Effects of alkaline additives on the $CO_2$ removal reaction have been investigated by a thermogravimetric analyzer. $Li_2ZrO_3$ was synthesized by soild reaction of $ZrO_2$ with $Li_2CO_3$ and then alkali chemicals were added to the synthesized $Li_2ZrO_3$ and then heat treatment was carried out. Addition of alkali chemicals enhanced the reactivity of $Li_2ZrO_3$ with the following order; $K_2CO_3>NaCl>LiCl>Na_2CO_3$, which were resulted from the formation of partially melted $Li_2CO_3$. SEM photographs showed the presence of melted state and the XRD results showed that the chemical states of added salts were not changed. Addition of NaCl caused the induction time of about 60 min at the initial reaction stage and the addition of $Na_2CO_3$ inhibited the decomposition of $Li_2CO_3$ at about $700{\sim}750^{\circ}C$.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.2
• /
• pp.81-86
• /
• 2014

The process parameter in optimized KOH alkali activation of soft carbon series coke material in high purity was set with DOE experiments design. The activated carbon was produced by performing the activation process based on the set process parameters. The specific surface area was measured and pore size was analyzed by $N_2$ absorption method for the produced activated carbon. The surface functional group was analyzed by Boehm method and metal impurities were analyzed by XRF method. The specific surface area was increased over 2,000 $m^2/g$ as the mixing ratio of activation agent increased. The micro pores in $5{\sim}15{\AA}$ and surface functional group under 0.4 meq/g were obtained. The contents of the metal impurity in activated carbon which is the factor for reducing the electrochemical characteristics was reduced less than 100 ppm through the cleansing process optimization. The electrochemical characteristics of activated carbon in 38.5 F/g and 26.6 F/cc were checked through the impedance measuring with cyclic voltammetry scan rate in 50~300 mV/s and frequency in 10 mHz ~100 kHz. The activated carbon was made in the optimized activation process conditions of activation time in 40 minutes, mixing ratio of activation agent in 4.5 : 1.0 and heat treatment temperature over $650^{\circ}C$.

• Journal of Technologic Dentistry
• /
• v.22 no.1
• /
• pp.145-152
• /
• 2000

In order to select an effective antibiotic substance against oral resident bacteria, we were isolated from soil and texonomically analyzed. Seven hundred and eighteen strains were isolated on humic acid- vitamin agar(HV agar) and 220 strains were on methanol medium from three each paddy forest, field and riverside soil samples. So, during the screening of antibiotics from soil, we isolated microorganisms showing powerful antagonistic activity against oral resident bacteria. Microorganism was tested against 25 strains of bacteria, yeast and fungi. Among them, No. 248 strain exhibited the most strongly growth inhibition. So, the taxonomical analysis the isolated strain was found to be unknown Actinomyces sp. and was named No 248. A production of the antibiotics from No. 248 begins at the early exponential phase developed at the 72th hour under the optinum conditions. The property of No. 248 antimicrobial compound was very stable under acid(pH 3.0) and alkali(pH 10.0) treatment, but it was instable in heat treatment at $120^{\circ}C$. For the improvement of antibiotic activity, two mutants were isolated from strain No. 248 by the treatment of mutagenic agents, NTG and hydroxylamine. As a result, the mutant strains excreted the potent antibiotics to inhibit the growth of Candida albicans.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.859-869
• /
• 2005

The commercial $V_2O_5-WO_3/TiO_2$ catalysts which had been exposed to the off gas from incinerator for a long time were regenerated by physical and chemical treatment. The catalytic properties and NOx conversion reactivity of those catalysts were examined by analysis equipment and NOx conversion experiment. The characterization of the catalysts were performed by XRD(x-ray diffractometer), BET, POROSIMETER, EDX(energy dispersive x-ray spectrometer), ICP(inductively coupled plasma), TGA(thermogravimetric analyzer) and SEM (scanning electron microscopy). NOx conversion experiment were performed with simulated off gas of the incinerator and $NH_3$ was used as a reductant of SCR reaction. Among the regeneration treatment methods which were applied to regenerate the aged catalysts in this study, it showed that the heat treatment method had excellent regeneration effect on the catalytic performance for NOx conversion. The catalytic performance of the regenerated catalysts with heat treatment method were recovered over than 95% of that of fresh catalyst. For the regenerated catalysts with the acid solution(pH 5) and the alkali solution(pH 12), the catalytic performance were recovered over than 90% of that of fresh catalyst. From the characterization results of the regenerated catalysts, the specific surface area was recovered in the range of $85{\sim}95%$ of that of fresh catalyst. S and Ca element, which are well known as the deactivation materials for the SCR catalysts, accumulated on the aged catalyst surface were removed up to maximum 99%. Among the P, Cr, Zn and Pb elements accumulated on the aged catalyst surface, P, Cr and Zn element were removed up to 95%. But the Pb element were removed in the range of $10{\sim}30%$ of that of fresh catalyst.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.4
• /
• pp.59-65
• /
• 2009

The antimicrobial activity-possessing materials were screened in the cell free supernatant (CFS) of fourteen lactic acid-fermenting strains isolated from pig's intestine. Each cell free supernatant of cultured strains was treated with various proteinases, heat, and/or alkali (NaOH). The antimicrobial activities were remained even after the enzyme and heat treatment but disappeared after neutralization with 1M NaOH, implying that the materials would be organic acids rather than proteins. Further purification of CFS through solid phase extraction using Sep-pak $C_{18}$ Cartridges and high performance anion exchange chromatography using Bio-LC system revealed that four organic acids, such as oxalic acid, citric acid, lactic acid, and acetic acid, were the main materials for the activity. Lactic acid was the highest amount in all organic acids, ranging from 54% to 77%. This strongly implies that the lactic acid would be the primary material for the antimicrobial activity in all tested strains.

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.381-386
• /
• 2010

Some basic properties of inorganic coatings hardened by the room temperature reaction with alkalies were examined. The coating paste was prepared from the powders in the system $Al_2O_3-SiO_2$-CaO using blast furnace slag, fly ash and amorphous ceramic fiber after mixing with a solution of sodium hydroxide and water glass. The mineralogical and morphological examinations were performed for the coatings prepared at room temperature and after heating to $1200^{\circ}C$ respectively. The binding force of the coating hardened at room temperature was caused by the formation of fairly dense matrix mainly composed of oyelite-containing amorphous phase formed by the reaction between blast furnace slag and alkali solution. At the temperature, fly ash and ceramic fiber was not reacted but imbedded in the binding phase, giving the fluidity to the paste and reinforcing the coating respectively. During heating up to $1200^{\circ}C$, instead of a break in the coating, anorthite and gehlenite was crystallized out by the reaction among the binding phase and unreacted components in ternary system. The crystallization of these minerals revealed to be a reason that the coating maintains dense morphology after heating. The maintenance of binding force after heat treatment is seemed to be also caused by the formation of welldispersed fiber-like mineral phase which is originated from the shape of the amorphous ceramic fiber used as a raw materials.

• Korean Journal of Materials Research
• /
• v.34 no.3
• /
• pp.175-183
• /
• 2024

Geopolymer, also known as alkali aluminum silicate, is used as a substitute for Portland cement, and it is also used as a binder because of its good adhesive properties and heat resistance. Since Davidovits developed Geopolymer matrix composites (GMCs) based on the binder properties of geopolymer, they have been utilized as flame exhaust ducts and aircraft fire protection materials. Geopolymer structures are formed through hydrolysis and dehydration reactions, and their physical properties can be influenced by reaction conditions such as concentration, reaction time, and temperature. The aim of this study is to examine the effects of silica size and aging time on the mechanical properties of composites. Commercial water glass and kaolin were used to synthesize geopolymers, and two types of silica powder were added to increase the silicon content. Using carbon fiber mats, a fiber-reinforced composite material was fabricated using the hand lay-up method. Spectroscopy was used to confirm polymerization, aging effects, and heat treatment, and composite materials were used to measure flexural strength. As a result, it was confirmed that the longer time aging and use of nano-sized silica particles were helpful in improving the mechanical properties of the geopolymer matrix composite.