• Journal of the Korean Wood Science and Technology
• /
• 제19권1호
• /
• pp.14-21
• /
• 1991

Steam-exploded woods were delignified by two-stage with a 0.3% NaOH extraction and oxygen-alkali bleaching and were subjected to the enzymatic hydrolysis with cellulase enzyme. Also, an improved almost quantitative recycle process of cellulase enzyme was discussed. In enzyme recovery by affinity method, The first recycling showed relatively high hydrolysis rate of 96.4%. Even at the third recycle, hydrolysis rate was 87.0 percents. In the case of cellulase recovery by ultrafiltration method, first 2 recycling treatments resulted in very high hydrolysis rates, 96.8% and 95.0%, respectively. Even the third recycling showed about 93.6%. Steam-explosion treatment of oak wood followed by 2-stage delignification with alkali and oxygen-alkali produced a excellant substrate for the enzymatic hydrolysis that allowed almost quantitative recycle of cellulase.

• 펄프종이기술
• /
• 제42권4호
• /
• pp.64-70
• /
• 2010

In this study, hemicelluloses were pre-extracted from mixed hardwood chips using sodium hydroxide solution and then they were isolated from pre-extractives by using various solvents. Isolation was conducted by precipitating hemicelluloses with isopropanol, ethanol, 1,4-dioxane, dimethylsulfoxide (DMSO) and potassium hydroxide (KOH), respectively. The precipitate yield on alkali pre-extractives was the highest when hemicelluloses were isolated by DMSO and then precipitated with ethanol. Most precipitates were yellow colored. The efficiency of isolation was evaluated by analysing the characteristics of isolated hemicelluloses. Isolation using DMSO, KOH and 1,4-dioxane ($80^{\circ}C$) showed rather high efficiency. The highest total separation efficiency was about 77% when alkali pre-extractives were reacted with KOH and precipitated with ethanol. The quantity and purity of isolated hemicelluloses were affected by the solvent type.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.103-107
• /
• 2013

In this study, the ionic liquid 1-ethyl-3-methylimidazolium tetraflouroborate (EMI-BF4) was synthesized and purified using the liquid/liquid fractional distillation method to apply a supercapacitor. EMI-BF4 was extracted with dichloromethane from the liquid/liquid extraction method in acidic, neutral, and alkali conditions for removal of impurity, and then the electrical capacities of the purified ionic liquids were measured and compared. The electrical capacities of ionic liquids under acidic condition showed higher value than those of neutral or alkali conditions. As the ratio of ionic liquid to solvent became higher, the electrical capacity value was increased.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.141-146
• /
• 2005

Calix[4]crown-6-2,4-bis(4-aminobutyl ether), which has a crown-6 moiety at the 1,3-position and amino function at the 2,4-position, was prepared as an intermediate for the subsequent synthesis of calix[4]crown-6-containing polyamide and polyimide using adipoyl chloride and 1,2,4,5-benzenetetracarboxylic dianhydride. The chemical structures were characterized by IR, $^{1}H NMR$ spectroscopy and elemental analysis, and some of their physical properties, including their thermal behavior, were examined. The ion binding characteristics of the monomer and polymers for alkali metal and alkali earth metal ions were measured by liquid-liquid extraction from the aqueous phase into the organic phase. It has been observed that polyamide has a high binding ability towards various metal cations as compared to polyimide, which showed cesium ion selectivity.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.427-430
• /
• 2004

Calix[4]crown-6-2,4-bis(2-hydroxyethyl ether) (2), which has crown-6 moieties at the 1- and 3-positions and hydroxyethyl functions at the 2- and 4-positions, was prepared for the syntheses of polyester 3 and polyurethane 4 by reactions with adipoyl chloride and hexamethylene diisocyanate, respectively. The ion binding characteristics of monomer 2 and polymers 3 and 4 toward alkali and alkali earth metal ions were measured by liquid-liquid extraction from the aqueous phase into the organic phase. We observed that the polyurethane 4 has a higher binding affinity toward various metal cations when compared to polyester 3, which exhibits cesium ion selectivity.

• 분석과학
• /
• 제17권6호
• /
• pp.527-531
• /
• 2004

Treatment with aqueous sodium hydroxide solution plays an important role to impart certain desirable properties - feel and luster on the surface of polyester fiber. In this process alkali wastewater contains disodium terephthalate, ethylene glycol (EG) and residual sodium hydroxide. In this paper we report a new method containing the pretreatments of derivatization with benzoyl chloride and solvent extraction using pentane. The calibration curve of EG determined by GC/MS-SIM shows a good linearity in the range of 0.1 to $25{\mu}g/mL$ having the standard deviation of ${\leq}8.7%$. The recovery and the detection limit of this method are 91.9-93.7% and $0.05{\mu}g/mL$ respectively.

• 한국축산식품학회지
• /
• 제43권1호
• /
• pp.61-72
• /
• 2023

The practical use of Korean native black goat skin as a source of gelatin extraction is limited. The objective of this study was to optimize the extraction temperature and time of gelatin from Korean native black goat skin, and to compare the quality characteristics of goat skin gelatin and other commercial gelatin products. Response surface methodology was applied to optimize the extraction temperature and time of gelatin obtained from native Korean black goat skin. The effects of temperature (50℃-70℃) and time (2-4 h) on extraction yield and gel strength were investigated using a face-centered central composite design with 13 experiments. Gelatin extraction from Korean native black goat skin was prepared through the serial processes of alkali pre-treatment, bleaching, neutralization, hot-water extraction, and freeze-drying. Using the optimization plot of Minitab software, the optimized conditions for extracting temperature and time of goat skin gelatin were 59.49℃ and 3.03 h, and the optimized values of extraction yield and gel strength were 12.52% and 263.37 g, respectively. Based on a quality comparison of goat skin gelatin with commercial gelatin, the pH value of gelatin extracted from Korean native black goat skin was 5.57. The color of gelatin extracted from Korean native black goat skin was darker than that of commercial gelatin (p<0.05). Higher emulsifying properties and gel strength of goat skin gelatin were observed when compared to those of commercial gelatin (p<0.05). Therefore, the results of this study indicate that Korean native black goat skin may be a valuable source for gelatin extraction.

• 한국식품영양과학회지
• /
• 제29권4호
• /
• pp.712-718
• /
• 2000

정향으로부터 알칼리 추출시 열수 추출보다 3~6 배의 높은 항응고 활성을 기대할 수 있었으며 최적 추출조건은 1.0 N NaOH, 7$0^{\circ}C$임을 알 수 있었다. 정향을 alkali 추출, 에탄올침전, cetablon 처리 및 한외여과를 이용하여 항응고 활성 획분 EC-2B와 EC-2C를 얻었다. 이 두 획분은 열수 추출보다 각각 6.57배 및 8.63배 높은 항응고 활성획분으로 이는 heparin과 비교시 5.0 unit/mg과 EC-2C는 8.8 unit/mg에 해당되는 활성이다. 이 두 획분을 이용하여 수육을 제조하여 관능검사를 실시한 결과 EC-2B 획분은 정향원물과 유사한 기호도를 가지고 있었으나 EC-2C 획분은 약간의 화학취 로 기호도가 낮았다. 보존성 향상효과 또한 정향원물과 정향추출물(EC-2B 및 EC-2C)에서 관찰되었으며 병원성 미생물에 대한 항균 효과측정 결과 두 획분 모두 항균성을 획인할 수 있었다. EC-2B의 경우 황색포도구균은 0.016% 이상부터 EC-2C는 대장균과 황색포도상ㄱ 균에서는 0.004%에서도 생육 저해효과가 나타났다. EC-2C 획분이 항응고 활성과 항균활성 이 우수하나 안전성과 기호도에서 EC-2B가 우수하였다. 따라서 정향으로부터 추출한 두 항 응고 획분 중 EC-2B 획분이 기능성 식품의 소재로 적합함을 알 수 있었다.

• 한국식품과학회지
• /
• 제7권3호
• /
• pp.109-114
• /
• 1975

국내산 한천원조(寒天原藻)로서 남해(南海), 완도(莞島), 여수(麗水)지역에서 수집한 꼬시레기에 대하여 전처리(前處理)방법에 따른 한천의 수율(收率)과 품질특성(品質特性)을 분석한 결과는 다음과 같다. 원조(原藻)의 전처리(前處理)과정에서 고온(高溫)알칼리 처리는 알칼리의 농도가 높을수록 수율(收率)이 증가하였으나 처리시간은 한시간이 최적(最適)이었다. 산(酸)처리에서는 산(酸)농도가 높을수록 또 처리시간이 길수록 수율(收率)이 증가하였다. 상온(常溫)알칼리 처리에서는 알칼리의 농도가 높을수록 또 처리시간이 길수록 수율(收率)이 약간씩 감소하였다. 한천(寒天)제품의 품질특성(品質特性)을 보면 전처리과정에 의하여 전질소, 조회분은 크게 감소하였다. 한천(寒天)제품의 제리강도(强度), 젤화능력(化能力), 젤화온도(化溫度), 점도(粘度)는 고온(高溫)에서 원조(原藻)의 알칼리처리조건이 강할수록 증가하는 경향이 있었으며 유황함량과 제리강도(强度)는 고도(高度)의 부(負)의 상관(相關)관계를 나타내었다. 원조(原藻)의 상온(常溫)알칼리처리는 처리조건에 따라 한천의 품질향상(品質向上)에 있어서 큰 차이가 없었으며 고온(高溫)알칼리처리와 유사한 효과(效果)를 나타내지 못하였다.

• 생명과학회지
• /
• 제6권1호
• /
• pp.14-26
• /
• 1996

In order to effectively utilize fish(Cod, Gadus macrocephalus) bone obtained as fish waste in fish manufactory, the preparation of the fish bone gelatin were attempted by heat extracting method from collagen protein contained in the fish bone. The methods of two kinds pretreatments (the B-type by alkali pretreatment and the E-type by enzyme pretreatment) for fish bone and the optimal extraction conditions to prepare gelatin from pretreated fish bone were investigated. Physical properties and functionalities of the two type fish bone gelatins obtained were compared with the commercial gelatin and the fish skin gelatin. The optimal extraction conditions of the B-type and the E-type gelatins were 5 folds of added water with material(w/w), pH 5.0, 3 hrs of extraction time and 60$\circ$C of extraction temperature. The yield of the B-type and the E-type gelatins were 32.6% and 28.1 %, respectively. The B-type gelatin was superior to the E-type un all physical properties. Molecular weight of the B-type was larger than that of the E-type due to its pretreatment method. Among the composition of amino acids, the amino acids such as glycine, alanine, glutamic acid and imino acids(proline and hydroxyproline) were responsible for 68$\sim$70% of the total amino acids. Functionalities of the fish bone gelatin were almost similar to commercial gelatin.