• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.254-258
• /
• 1999

The distribution of anionic groups in the fibers, the fines, the colloidal fraction and the dissolved fraction, respectively, of thermomechanical pulp (TMP) suspensions was determined and peroxide bleaching of spruce TMP were also studied. Spruce TMP was extracted with hexane, treated with alkali, or bleached with peroxide. Suspensions made at pH 5.5 were fractionated into long fibres, large fines, small fines, a colloidal fraction and a dissolved fraction. The charge of the fractions was determined using polyelectrolyte titration. To determined the origin of the charges, the contents of fatty acids, resin acids and acidic units in hemicelluloses in the different fractions were determined by has chromatography. Extraction of TMP with hexane prior to fractionation increased the measured charge of the fibres. The removal of the wood resin probably uncovered some carboxyl groups on the fibre surfaces, or improved th e penetration of polybrene into the pores of the fibres. The charge of the fines and the colloidal fraction was lower when the wood resin had been removed. Alkaline treatment of the TMP increased the charge of the fibres and fines, mainly because of demethylation of pectins. Alkaline treatment increased the charge also of the dissolved fraction, because of the release the charge also of the dissolved fraction, because of the release of pectic acids into the water phase. Alkaline peroxide bleaching further increased the charge of fibres and the dissolved fraction, most likely because of lignin oxidation. The charge of the colloidal fraction, consisting mainly of wood resin, was only slightly affected by alkaline treatment and peroxide bleaching. The anionic groups in TMP suspensions were mainly free uronic acids in the hemicelluloses. The contribution from the fatty and resin acids was substantial only for the colloidal fraction.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.1-7
• /
• 2013

This study was on leaching test(KSLT, TCLP) of the aggregate for the products(RA-1) and for the site(RA-2) to evaluate the characteristics of contaminants and the possibility of contamination arising from the aggregate. On the basis pH, conductivity and heavy metal contents in the aggregate, RA-1 indicated higher than RA-2. As a result of the leaching test, the pollutants were eluted from the aggregate increased as the particle size of the aggregate was smaller. The pH in the aggregate had a strong alkali by a pH value of 9.0~12.3, the conductivity was higher in less than 10mm RA-1 due to the leaching of dissolved inorganic ions. The heavy metals satisfied the leaching standards of KSLT and less 10% was eluted from the aggregate. As a result of evaluating water pollution possibility of the aggregate, the pH displayed in items with a very high possibility of contamination, conductivity and turbidity did in item with a low possibility of contamination and on the other hand the heavy metals did in item with a very low possibility of contamination.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.299-312
• /
• 2008

The fat of Tra and Basa catfish (Mekong Delta, Viet Nam) was evaluated for the first time as the potential feedstock for biodiesel production, due to its abundance, availability and cheap cost. The unsaturated fatty acid contents of Tra and Basa fat were 57.97% and 64.17%, respectively. Biodiesel was prepared from Tra and Basa fat by methanolysis reaction using alkali catalysts like sodium hydroxide and potassium hydroxide. Effects of various process parameters on biodiesel production, such as molar ratio of methanol to fat, catalyst concentration, temperature and time were investigated. As those results, the transesterification can be performed under moderate conditions, and the biodiesel yields were shown more than 90%. KOH catalyst was the best catalyst for biodiesel production from both Basa and Tra fat. As the feedstock aspect, Basa fat was indicated more efficiency than that of Tra fat. The maximum yield could be achieved by the transesterification from Basa fat with 5:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 50 min. For Tra fat, the optimal condition were at 6:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 45 min. Nowadays, due to cheaper cost and abundance, Tra fat is a promised resource for cheap biodiesel production in Viet Nam.

• Economic and Environmental Geology
• /
• v.12 no.3
• /
• pp.115-126
• /
• 1979

The Jecheon granite mass has turtle-shape exposure of about $190km^2$ at vicinity of Jecheon-eup, and is elongated in the direction of NEE-SWW. It discordantly intrudes the Bakdalryong metamorphic rocks and the great limestone series(Samtaesan and Hungwolri formation) which belong to the pre-Cambrian and Ordovician, respectively. The mass is composed of five facies of different grain size; texture and charecteristic minerals. The five facies are (1) coarse grained biotite granodiorite, (2) fine grained hornblende biotite granodiorite, (3) coarse grained pink feldspar granodiorite (4) leucogranite, and (5) porphyritic biotite granite. The mutual relationship between each facies is intrusion in (1)-(2) and (2)-(3), but unknown in (3)-(4) and (4)-(5). 22 modal analyses and and 10 chemical analyses on more than a hundred of representative samples taken from the mass are listed as tables. Triangular plot of modal and normative Q-Kf-Pl of this mass show a continuous differentiation products from certain common magma by change of chemical composition and anorthite contents in plagioclase. The metamorphic facies of contact aureole in surrounding rocks adjacent to the granite body are corresponded to hornblende hornfels facies with mineral assemblages of wollastonite-diopside-calcite in calcareous rocks, and of quartz-biotite-muscovite-cordierite in argillaceous rocks. Variation of silica versus oxides of major elements shows that the mass is similar to the trend of Daly's average basalt-andesite-dacite-rhyolite which shows the trend of the fractional crystallization of magma, and is equivalent to the calc-alkali rock series by Peacock. AMF diagram shows that Jecheon granite mass is equivalent to normal diffentiation products such as skaergaard intrusion. The above evidences suggest that the Jecohon granite mass is normal differentiation products formed by fractional crystallization under relatively slow cooling condition.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.29-34
• /
• 2017

This study provides the identification of corrosion cause substances in super heater tube from a commercial scale circulating fluidized bed boiler. Electricity is produced by the combustion of biomass mainly wood waste. The biomass, super heater tube, super heater tube ash, and boiler ash were collected and components associated with corrosion were analyzed. A large amount of oxygen-containing material was found due to oxidation. The chlorine content was analyzed as 6.1% and 4.3% in super heater tube ash and boiler ash respectively which were approximately 20 and 14 times higher than those of designed values. Also, alkaline metal contents (K, Na, Ca) were very high in ash samples collected from super heater tube and boiler. The tendency of slagging and fouling was predicted based on X-Ray Fluorescence (XRF) results. Basicity that can lead to slagging was estimated as 3.62 and 2.72 in super heater tube and boiler ash, respectively. Slagging would occur with ash content when considering the designed value as 0.35.

• Journal of Animal Environmental Science
• /
• v.20 no.3
• /
• pp.125-132
• /
• 2014

This study was conducted to investigate the effects on chemical properties of soil and yield of chinese cabbage when the piggery liquid slurry (ADS) digested anaerobically in the biogas plant was sprinkled to the soils. Treatments were composed of non-nitrogen plot (PK), chemical fertilizer plot (NPK) and ADS plot, and were arranged by randomized block design with 3 replications. The ADS was an alkali (pH 8.6) fertilizer containing 0.55% of total nitrogen, optimal levels of phosphorus, potassium and other components. When based (100%) on the yield of chinese cabbage in the NPK, those of the ADS and the PK were 114% and 43%, respectively. The nitrogen absorption of chinese cabbage at 50-d after transplant was significantly greater (p<0.05) in the ADS than other treatment. Heavy metal contents of soil were not difference between before and after experiment. With supplementing phosphorus and potassium sources in it, the ADS should be an excellent fertilizer in cabbage culture.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.228-233
• /
• 2007

The high cost and lack of vegetable oil are limiting the expansion of biodiesel production. The purpose of research was to investigate the potential of animal fats as biodiesel feedstock. In this paper, transesterification using alkali catalyst and methanol was performed to reaction, we carried out experiments that it was changed variables as reaction temperature, methanol molar ratio, catalyst types, amount of catalyst and reaction time. The optimum reaction condition for biodiesel production was reaction temperature 65$^{\circ}C$, potassium hydroxide 1.0% (w/w), oil to methanol molar ratio 1:15 and reaction time 20 min. In this reaction condition, the contents of fatty acid methyl ester was reached to about 98.7%. Also, properties of biodiesel were measured to correspond to domestic quality standard of acid values, density and viscosity.

• Nuclear Engineering and Technology
• /
• v.5 no.1
• /
• pp.3-12
• /
• 1973

Some physical and chemical properties of wood-plastic combinations(W.P.C.) made of domestic soft woods such as pinus densiflora, pinus rigida and poplus deltoides were measured. The rates of improvement in properties were roughly proportional to the contents of polymer or polymer mixtures in W.P.C. For the W.P.C. obtained by means radiation curing and containing 80% of polymer or polymer mixture, the hardness and water absorptirity were improved 2.2 times and 4 times those of the original wood, respectively. The improvement of hardness was especially remarkable in the W.P.C. made of pinus densiflora and polystyrene(120%) to show 7 times increased hardness. For the W.P.C. obtained by means of thermal curing and containing 80% of polymer or polymer mixture, the hardness and water absorptivity were improved 2.4 times and 3.4 times those of the non-treated woods, respectively. These data indicate that the properties of W.P.C. prepared by means of radiation curing are not much different from those of W. p. C. prepared by means of thermal curing. Both of acid resistancy and alkali resistancy of the W.P.C. were also improved remarkably in comparison with the non-treated wood.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.403-407
• /
• 1995

For the use of starch gel like Mook(a Korean traditional gel food), the physicochemical properties and gelatinization patterns of defatted high amylose corn starch were investigated. The crude and total lipid contents of starch decreased by defatting from 0.07%, 0.92% to 0.03%, 0.19%, respectively. But iodine affinity increased from 51.6% to 71.3%. Water binding capacity of starches increased from 104.6% to 117.3% after defatting. Soluble carbohydrate and leached amylose of untreated and defatted starches were increased rapidly above $110^{\circ}C$. The apparent viscosity of starch dispersion using alkali solution increased above 0.3N NaOH solution but the transmittance increased above 0.4 N NaOH. The DSC thermograms of both starches showed broad and double endotherm with relatively low enthalpy, but the second peak of endotherm was larger in defatted starch than in untreated starch.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.134.1-134
• /
• 2003

The purpose of this study was to investigate the release of p-hydroxybenzoic acid and other compounds from cell wall materials(CWM) and their cellulose fraction from carrot with chemical and enzymatic hydrolysis. To investigate this effect on cell wall chemistry of carrot, alcohol insoluble residue(AIR) of CWM were prepared and were extracted sequentially with water, imidazole, CDTA(-1, -2), Na$_2$CO$_3$(-1, -2), KOH(0.5, 1.0 and 4M), to leave a residue. These were analysed for their carbohydrate and phenolic acids composition. Arabinose and galactose were the main noncellulosic sugars. Phenolics esterified to cell walls in carrot were found to consist primarily of p-hydroxybenzoic acid with minor contribution from vanillin, ferulic acid and p-hydroxybenzaldehyde. p-Hydroxybenzoic acid was quite strongly bound to the cell wall. The contents of p-hydroxybenzoic acid in 0.5M KOH, Na$_2$CO$_3$-2, IM KOH, and ${\alpha}$-cellulose were 2,097, 1,360, 1,140, and 717 $\mu\textrm{g}$/g AIR from CWM, respectively. Alkali labile unknown aromatic compound(C$\sub$7/H$\sub$10/O$_2$) was found in ${\alpha}$ -cellulose hydrolyzate digested with driselase and cellulase. This compound was also found in hydrolyzate of 2 M trifluoroacetic acid at 120$^{\circ}C$ for 2 hours. Driselase treatment solubilized only 46.6 $\mu\textrm{g}$/g of the p-hydroxybenzoic acid from carrot AIR. These results indicate that p-hydroxybenzoic acid was associated with neutral polysaccharides, long chain galactose and branched arabinan from graded alcohol precipitation.