• 대한건축학회논문집:구조계
• /
• 제36권2호
• /
• pp.155-163
• /
• 2020

Indoor airborne particles are consisted of outdoor- and indoor-generated particles, which can be characterized by their compositions, generation features and toxicity. The identification of source contribution of indoor and outdoor origin to indoor particles is important to understand PM_2.5 transport in a building as well as its impact on occupant health. The objective of this study is to investigate seasonal source contribution to indoor PM_2.5 concentration depending on airtightness of apartment units. To evaluate the source contribution, particle transport including penetration, generation, exfiltration in an apartment housing unit was simulated by using CONTAM with particle and airflow simulation parameters obtained from field measurements. The result showed that the outdoor source contribution to indoor air was relatively dominant in the leaky housing unit during spring (77.2%) and winter (73.9%), and the indoor source was dominant in the airtight housing unit during summer (60.3%) and fall (60.7%). These results indicate the seasonal health risk of indoor PM_2.5 can be varied according to airtightness of apartment units.

• 한국지리정보학회지
• /
• 제6권3호
• /
• pp.95-106
• /
• 2003

본 연구에서는 최근 도시계획, 수자원 및 방재 분야에서 높은 관심을 가지고 연구중인 항공레이저측량기법을 활용하여 시가지의 건축밀도를 평가하였다. 먼저, 레이저스캐너인 LiDAR(light detection and ranging)로 취득한 표고자료로부터 DEM(digital elevation model)과 DSM(digital surface model)을 구축하였으며, 건물의 높이를 계산하기 위해 DEM에는 ZONALMEAN 필터, DSM에는 ZONALMAJORITY 필터를 적용하였다. 필터링 과정으로부터 계산한 층수와 현지조사의 층수를 비교한 결과 표준오차 ${\pm}0.199$층을 확보할 수 있었다. 또한 건물 연면적 레이어와 구획 레이어를 중첩하여 통계분석함으로서 도시 구획별 용적률을 제시할 수 있었다. 항공레이저측량 자료를 이용하여 계산한 용적률과 현지조사로부터 계산한 용적률의 비교 결과, 용적률의 표준오차를 ${\pm}2.68%$로 확보할 수 있었다. 따라서, 항공레이저측량 자료는 향후 토지이용계획을 수립하는 의사결정자에게 매우 유용한 자료를 제공해 줄 것으로 기대한다.

• 대한원격탐사학회지
• /
• 제26권3호
• /
• pp.361-371
• /
• 2010

In recent, interests regarding open source software for geo-spatial processing are increasing. Open source remote sensing (OSRS) is regarded as one of the progressing and advanced fields in remote sensing. Nevertheless, analyses or application cases regarding OSRS are not enough for general uses or references. In this study, three kinds of OSRS software in consideration of international popularity, types of functionalities, and development environments are taken into account: OSSIM, Opticks, and ORFEO Toolbox (OTB). First, functional comparison with respect to these is carried out on the level of the preliminary survey. According to this investigation, OTB is chosen as the most applicable OSRS software in this study. Running on OTB, NIX format importing module and database connecting module are implemented for widely general uses and further application. As for an example case, airborne image of NIX format is used to region growing segmentation algorithm in OTB, and then the results are stored and retrieved in PostGIS database to test implemented modules. Conclusively, local customization and algorithm development using OSRS software are necessary to build on-demand applications from the developers' viewpoint.

• 대한원격탐사학회지
• /
• 제14권3호
• /
• pp.296-306
• /
• 1998

Airborne MSS 자료는 수질오염을 효과적으로 감시하고 분석할 수 있는 자료이다. 본 연구에서는 다목적 실용위성(KOMPSAT)에 탑재될 저해상도카메라(LRC)의 다중분광 영상자료를 수질오염 분석에 활용할 목적으로 수질인자의 분광반사도를 측정하였으며, 고해상도 원격탐사 자료인 Airborne MSS 자료를 이용하여 수역에서의 수질인자 추출 가능성을 조사하였다. 특히 부영양화와 관련된 환경인자 추출을 시도하였다. 수질인자는 클로로필-a, 부유물질, 탁도 등을 선정하여 분광반사 특성 및 처리기법을 개발하였다. 그 결과는 다음과 같다 첫째, 수면에 도달하는 태양광 스펙트럼은 가시광 영역인 0.4~0.7$\mu\textrm{m}$에서 전체 복사량의 50% 정도가 반사되며, 0.50$\mu\textrm{m}$ 부근에서 가장 높다. 둘째, 클로로필-a는 녹색 파장대인 0.52$\mu\textrm{m}$, 부유물질의 반사도는 0.8$\mu\textrm{m}$, 탁도는 0.57$\mu\textrm{m}$에서 높은 반사율을 보였다. 셋째, Airborne MSS자료를 이용하여 수질인자 분석결과, 클로로필-a는 Band 3과 Band 7을 비연산처리를 하여 분포도를 작성하였다. 부유물질은 Band 7에서 분포도를 작성할 수 있었으며, PCA를 수행하였을 때 PC 1에서 유용함을 알 수 있었다. 탁도는 PCA 분석시 PC 4에서 현장자료와 유사한 분포패턴을 나타내었다. 이상의 결과들은 계절적, 시간적 변화에 따라 파장대역이 달라질 수 있으므로, LRC 자료를 이용하여 보다 정확한 수질환경 인자를 분석하기 위해서는 현장실측 자료 및 수역의 분광반사 특성 등을 지속적으로 조사할 필요가 있다. 추후 본 연구에서는 저해상도 위성영상 및 현장 분광반사도 측정을 통한 수역의 분광반사 특성을 지속적으로 분석하고, 수역의 수질분석자료 확보 및 수질오염 유형을 분석 할 것이다.

• 항공우주시스템공학회지
• /
• 제16권2호
• /
• pp.13-24
• /
• 2022

항공용 소프트웨어의 규모가 커짐에 따라 기능적 확장, 효율적인 개발 및 코드의 재사용을 위하여 객체지향 기술의 사용이 증가하고 있으나, 그 검증방안은 기존의 절차지향 프로그램 관점으로 수행되고 있다. 본 논문에서는 객체지향 기술의 특징과 객체지향 언어의 기능적 특징에서 파생되는 취약점들을 분석하고 객체지향기술이 적용된 항공용 소프트웨어의 기능 안전 무결성을 보장하기 위한 소프트웨어 개발단계(Design, Coding, Test)별 적용 가능한 검증 방안을 제시한다. 또한, 비행제어 소프트웨어 구현에 사용되는 오픈소스인 PX4에 정적분석 자동화 도구인 LDRA를 적용하여 제시한 단계별 검증 방안 중 정적분석 결과의 의미를 분석하였다.

• Nuclear Engineering and Technology
• /
• 제37권5호
• /
• pp.503-510
• /
• 2005

An instrumental neutron activation analysis was used to measure the concentrations of about 24 elements associated with airborne particulates (PM10) that were collected in the most polluted urban region of Daejeon city, Korea from 2000 to 2002. Using the measurement data for various elements, both the extent of elemental pollution in the study area and the seasonality in their distribution characteristics were examined. Examinations of their distribution patterns indicated that most elements with crustal origin tend to exhibit seasonal peaks during spring, while most elements with anthropogenic origin tend to exhibit seasonal peaks during fall or winter. In order to explain the factors regulating their mobilization properties, the data were processed by a factor analysis. Results of the factor analysis suggested competing roles of both industrial and natural source processes, despite that the study site is located at a downwind position of the industrial complex. Based on the overall results of this study, it is concluded that the site may be strongly impacted by man-made sources but the general patterns of elemental distributions in the study area inspected over a seasonal scale are quite consistent with those typically observed from natural environment.

• Asian Journal of Atmospheric Environment
• /
• 제4권1호
• /
• pp.9-19
• /
• 2010

The size distribution of airborne particulate matter (PM) and the concentrations of associated metallic elements were investigated in a busy urban region of a typical Korean industrial city. The PM concentrations measured during the spring, except for those in the size range of 1.1 to 2.1 ${\mu}m$, were slightly higher than the PM concentrations in the summer. Coarse particles contributed greatly to the variation in PM concentrations in the spring, while fine and submicron particles contributed largely to the variation in PM concentrations in the summer. The difference in size modes of the PM concentrations between spring and summer may be explained by the Asian dust effect and its accompanying wind direction and speed. Extremely high enrichment factors (EFs) values (6,971 to 60,966) for all of the size distributions in PM were identified for cadmium (Cd). High EFs values (12 to 907) were also identified for other heavy metals including Cr, Cu, Ni, Pb, Zn and Mn. Low EF values (0.29 to 8.61) were identified for Ca, K, Mg and Na. These results support the common hypothesis that most heavy metals in ambient PM have anthropogenic sources and most light metals have crustal sources. The results of principal components analyses and cluster analyses for heavy metals indicate that the principal sources of PM and metals were emissions from non-ferrous metal smelters, oil combustion, incinerators, vehicular traffic and road dust.

• Journal of Preventive Medicine and Public Health
• /
• 제47권5호
• /
• pp.253-257
• /
• 2014

Arsenic is a ubiquitous, naturally occurring metalloid that may be a significant risk factor for cancer after exposure to contaminated drinking water, cigarettes, foods, industry, occupational environment, and air. Among the various routes of arsenic exposure, drinking water is the largest source of arsenic poisoning worldwide. Arsenic exposure from ingested foods usually comes from food crops grown in arsenic-contaminated soil and/or irrigated with arsenic-contaminated water. According to a recent World Health Organization report, arsenic from contaminated water can be quickly and easily absorbed and depending on its metabolic form, may adversely affect human health. Recently, the US Food and Drug Administration regulations for metals found in cosmetics to protect consumers against contaminations deemed deleterious to health; some cosmetics were found to contain a variety of chemicals including heavy metals, which are sometimes used as preservatives. Moreover, developing countries tend to have a growing number of industrial factories that unfortunately, harm the environment, especially in cities where industrial and vehicle emissions, as well as household activities, cause serious air pollution. Air is also an important source of arsenic exposure in areas with industrial activity. The presence of arsenic in airborne particulate matter is considered a risk for certain diseases. Taken together, various potential pathways of arsenic exposure seem to affect humans adversely, and future efforts to reduce arsenic exposure caused by environmental factors should be made.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2005년도 국제학술대회
• /
• pp.254-258
• /
• 2005

The purpose of this study is to characterize the indoor-outdoor relationship of airborne pollutants and recognize probable sources in inside and outside individual apartments in Seoul metropolitan. Simultaneous air monitoring in inside and outside of the 16 Korean Apartments classified into 2groups: less than 1 year old and more than 4 years old from October, 2004 to February, 2005were sampled f3r airborne pollutants(volatile organic compounds, formaldehyde, respiratory particles, carbon dioxide and bacteria) using the Korean Indoor Air Quality Official Method. The concentrations of $CO_2$, TVOCs, HCHO, bacteria and PM10 in the less than 1 year old apartments were determined to be $773.6{\pm}422.3ppm$, $4,393.8{\pm}2,758.2{\mu}g/m^3$, $98.0{\pm}56.4{\mu}g/m^3$, $254.0{\pm}186.3CFU/m^3$ and $31.7{\pm}14.8{\mu}g/m^3$, respectively, Also, the concentrations of those in the more than 4 years old apartments were determined to be $798.9{\pm}266.5ppm$, $792.7{\pm}398.3{\mu}g/m^3$, $70.0{\pm}30.7{\mu}g/m^3$, $245.6{\pm}122.0CFU/m^3$, $49.7f28.7{\pm}g/m^3$, respectively. The average ratios of the indoor and outdoor concentrations of $CO_2$, TVOCs, HCHO, bacteria and PM10 were 2.2, 3.6, 3.1, 3.9 and 1.4, respectively. These results of this analysis is suggested that $CO_2$, TVOCs, HCHO, bacteria and PM10 in indoor air are both emitted from source within the apartment environment and partly come from outdoor air. With the above considerations in mind, it is suggested that the research for source contribution of indoor air pollutants should be expanded and the detailed interpretation of the results on these needed further study(using principal component analysis(PCA).

• 한국대기환경학회지
• /
• 제24권1호
• /
• pp.30-42
• /
• 2008

In this study, the chemical compositions of $PM_{2.5}$ samples collected at the Redwood National Park IMPROVE site in California from March 1988 to May 2004 were analyzed to provide source identification and apportionment. A total of 1,640 samples were collected and 33 chemical species were analyzed by particle induced X-ray emission, proton elastic scattering analysis, photon induced X-ray fluorescence, ion chromatography, and thermal optical reflectance methods. Positive matrix factorization (PMF) was used to develop source profiles and to estimate their mass contributions. The PMF modeling identified five sources and the average mass was apportioned to motor vehicle (35.8%, $1.58\;{\mu}g/m^3$), aged sea salt (23.2%, $1.02\;{\mu}g/m^3$), fresh sea salt (21.4%, $0.94\;{\mu}g/m^3$), wood/field burning (16.1%, $0.71\;{\mu}g/m^3$), and airborne soil (3.5%, $0.15\;{\mu}g/m^3$), respectively. To analyze local source impacts from various wind directions, the CPF and NPR analyses were performed using source contribution results with the wind direction values measured at the site. These results suggested that sources of $PM_{2.5}$ are also sources of visibility degradation and then source apportionment studies derived for $PM_{2.5}$ are also used for understanding visibility problem.