• 시스템엔지니어링학술지
• /
• 제5권2호
• /
• pp.27-34
• /
• 2009

This paper analyze technical review entry criteria and review process based on system property, and review checklist to conform technical review is also showed. The execution of review is determined according to the preparation of review item and identification for risk element. Risk level should be mitigated before technical review by appropriate plan. This paper described the entering condition of technical review for developmental phase, and tailoring consideration for technical review condition. Described technical review entry criteria, review process, and tailoring consideration is applied to development of test equipment for ground ant-air missile system. Applied system specific technical review process, tailored entry condition for test equipment for ground ant-air missile system and review check list is showed and the effectiveness of described system specific technical review process is presented.

• International Journal of Ocean System Engineering
• /
• 제2권1호
• /
• pp.32-36
• /
• 2012

This paper presents a comparison of potential and viscous computational codes for the water entry problem. A po-tential code was developed which adopted the boundary element method to solve the problem. A nonlinear free surface boundary condition was integrated to find new locations of free surface. The dynamic boundary condition was simplified by taking constant potential values for every time steps. The simplified dynamic boundary condition was applied in the new position of the free surface not at the mean level, which is the usual practice for linearized theory. The commercial code FLUENT was used to solve the water entry problem from the viscosity point of view. The movement of the air-liquid interface is traced by distribution of the volume fraction of water in a computational cell. The pressure coefficients were compared with each other, while experimental results published by other researchers were also examined. The characteristics of each method were discussed to clarify merits and limitations when they were applied to the water entry problems.

• Geomechanics and Engineering
• /
• 제20권5호
• /
• pp.411-420
• /
• 2020

Numbers fitting-curve equations have been proposed to predict soil-water retention curve (SWRC) whose parameters have no definitude physical meaning. And these methods with precondition of measuring SWRC data is time-consuming. A simplified directly method to estimate SWRC without parameters obtained by fitting-curve is proposed. Firstly, the total SWRC can be discretized into linear segments respectively. Every segment can be represented by linear formulation and every turning point can be determined by the pore-size distribution (PSD) of Mercury Intrusion Porosimetry (MIP) tests. The pore diameters governing the air-entry condition (AEC) and residual condition (RC) can be determined by the PSDs of MIP test. The PSD changes significantly during drying in SWR test, so the determination of AEC and RC should use the PSD under corresponding suction conditions. Every parameter in proposed equations can be determined directly by PSD without curve-fitting procedure and has definitude physical meaning. The proposed equations give a good estimation of both unimodal and bimodal SWRCs.

• 설비공학논문집
• /
• 제13권9호
• /
• pp.888-894
• /
• 2001

Advanced gas turbine engines employ turbine entry temperatures so high that cooling of the turbine blades is essential. The coolant flow introduces losses which need to be minimized, and therefore it is important that the minimum amount of coolant should be used. This work presents the result of the one-dimensional analysis and the effect of the boundary conditions on coolant flow rate in gas turbine blades.

• 설비공학논문집
• /
• 제14권6호
• /
• pp.512-518
• /
• 2002

The real chip and similarity model were used to investigate the thermal behavior and velocity distribution of air from the heat source with the location and the amount of heat experimentally and numerically, and compared. The heat generated in the block is not cooled by convection and show the high temperature by the stagnation of heat flow. After maintaining the high temperature of block by the natural convection, the sudden drop of temperature with the air flow was shown in the channel but the decreasing rate was small with the time. The inward block was effected by infinitesimal air flow generated between block and channel and outward block was effected by the entry condition.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.487-490
• /
• 2002

The real chip and similarity model were used to investigate the thermal behavior and velocity distribution of air from the heat source with the location and the amount of heat experimentally and numerically, and compared. The heat generated in the block is not cooled by convection and show the high temperature by the stagnation of heat flow. After maintaining the high temperature of block by the natural convection, the sudden drop of temperature with the air flow was shown in the channel but the decreasing rate was small with the time. The inward block was effected by infinitesimal air flow generated between block and channel and outward block was effected by the entry condition.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.102-111
• /
• 2001

To describe the air flow characteristics within an air cleaner cover and mass air flow sensor (MAFS) entry region installed in a 3.0L engine air induction system, flow visualization, velocity and turbulence intensity measurements were taken in several view planes. A detailed knowledge of the interaction between the design parameters and the flow structures will enhance our understanding of the motions within the flow field and enable engineers to optimize the induction system and reduce the signal-to-noise ratio in the MAFS output. Emphasis is placed on the analysis of coherent motions and the controlling parameters which affect the air flow in the MAFS entrance region over a flow rate of 13-240 kg/hr. The high speed motion pictures illustrated that the air flow generated within the air cleaner cover under steady state condition is quite complex. In both axial and radial planes of the main passage it was found that the flow pattern is remarkably influenced by the air cleaner cover and main passage configuration. A comparison of the flow patterns and measurements in the original and modified air cleaner cover is presented. Measurements from the MAFS indicated an significant reduction in pressure drop and signal noise for the modified cover as compared with the original cover, over an air flow rate of 13-240 kg/hr.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.725-730
• /
• 1987

본 연구에서는 2사이클 기관의 흡입 포오트 부근의 가스 유동을 레이저 도플 러 유속계를 이용하여 측정하고 가스의 평균 속도, 속도 변동, 유속 벡터 등을 기관의 회전 속도, 실린더 헤드의 모양 및 실린더로의 흡입 속도 측정점의 위치 변화에 대하 여 비교 검토하고, 유동 특성을 고찰하였다.

• 대한후두음성언어의학회지
• /
• 제33권1호
• /
• pp.7-12
• /
• 2022

Tracheostomy refers to a surgical incision created in the neck to allow direct air entry into the trachea bypassing the upper respiratory tract including the oral and nasal cavities. Normal vocalization and swallowing are limited immediately postoperatively; however, gradual recovery of vocalization and swallowing function can be initiated, following improvement in the causative condition that necessitated the tracheostomy. Duration of the tracheostomy depends upon the patient's condition, and the degree of vocalization and swallowing function recovery after tracheostomy tube removal varies widely across patients. In this review, we investigated the changes associated with vocalization and swallowing function in patients who underwent tracheostomy and have discussed the various approaches and voice rehabilitation treatments to aid with normal recovery.

• 한국지반공학회논문집
• /
• 제30권1호
• /
• pp.37-47
• /
• 2014

불포화 수리전도도는 Mualem 모세관 모델에 의하여 이론적으로 함수특성곡선으로부터 적분된다. 하지만 예측된 수리전도도는 포화 부근에서 모관흡수력의 미소한 변화에도 극도로 민감하다. 원활한 형태의 함수특성곡선에 의한 Mualem 수리전도도는 포화 부근에서 급격하게 감소하며, 수리적 거동을 신뢰할 수 있게 모델하지 못하거나 수치해의 안정성을 저해 한다. van Genuchten-Mualem(VGM) 수리전도도를 개선하기 위하여, 낮은 모관흡수력 수준에 있는 임의의 공기함입치이내에서 van Genuchten 함수특성곡선을 수정하였다. 수정 VG 곡선은 대수축에서 임의의 공기함입치에서 포화상태까지 선형화된다. 수정 VG 함수특성곡선은 실제 함수특성거동의 회귀분석에 영향을 끼치지 않으며 원래의 VG 함수특성곡선의 계수를 그대로 사용한다. 수정 VG 곡선을 이용하여, VGM 수리전도도는 임의의 공기합입치를 기준으로 구간별 적분하여 수정되었다. 수정 VGM 수리전도도가 해석적 해로 제안되었으며, 포화부근 영역에서 수리전도도가 급격하게 감소하는 현상이 제거되었다. 실제 사면의 2차원 침투해석을 통하여 VGM 수리전도도와 제안된 모델에 따른 수리거동을 비교하였다. 제안된 모델은 여러 강우조건에 따른 해의 수렴성을 확보하였지만, VGM 수리전도도를 적용하면, 포화부근의 수리전도도가 급격하게 감소하여 강우량이 많은 경우 해가 수렴하지 않았다. 특히 선행강우에 의한 초기 안전율과 집중강우 후 최종 안전율을 크게 평가할 수 있었다. 제안된 수리전도도 모델은 침투해석과 안정해석을 통하여 실제 사면의 붕괴를 재현할 수 있었다.