• 산업기술연구
• /
• 제27권A호
• /
• pp.31-38
• /
• 2007

Recently produced concrete has a tendency to overcome environmental defects. Porous and planting Eco-concrete requires the neutralization process and enough void in concrete to contain water, to pass air freely, and provides necessary nutrients to vegetation roots. The biological environment in concrete is not suitable for planting because the concrete possesses strong alkali constituent of pH 11-13. This study evaluated the strength and serviceability of concrete as well as the chemical characteristics of concrete mixed by low-grade iron ore left in the abandoned mine and treated by Ammonium monohydrogen phosphate, $(NH_4)_2HPO_4$. Test variables include two kinds of coarse aggregates such as crushed stones and low-grade iron ore, the duration time and the period for neutralization treatment by Ammonium monohydrogen phosphate, $(NH_4)_2HPO_4$, and the proportion ratio of cement, blast furnace slag and silica fume.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2110-2112
• /
• 2000

This paper describes the self healing characteristics of a metalized polypropylene film(MPPF) used for energy storage capacitors. In the experiment, a d.c. voltage was applied to the MPPF, and the partial discharge inception voltages(PDIVs), the applied voltages at self healing, the burn out area and the current in the grounding conductor were measured and recorded. As a result, it was found that no PDs were found till the first pre-self healing occurred, and the applied voltage at self healing was increased with PPF thickness. Self healing was much more dependant on the shape of the air void than its diameter and the burn out area and the current in the grounding conductor at self healing was also increased with the applied voltage at self healing.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.712-717
• /
• 2005

In this thesis, it is investigated that the effect of the cross linked polyethylene(XLPE) insulator do to breakdown phenomenon by the insertion of the needle and bar electrode into XLPE which is used of electric power cable for the ultra-high voltage. The result of the partial discharge properties in the specimen showed that in case of the insertion of needle or bar electrode into XLPE, the effect of the inner discharge become large when the air void is bigger then the clearance of the electrode of the specimen. The closer the distance between the insulator and needle electrode, it takes less time to the insulation breakdown.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.305-308
• /
• 2008

This paper describes a research study on the durability and strength properties of thin quiet-permeable asphalt concrete. Such asphalt mixes have high porosity, which offers significantly better drainages than normal mix designs. However, these materials also exhibit poor durability and strength limiting their use in pavement application. To remedy this, fiber and polymer modifiers have been proposed. All samples were added to modified binder which were prepared with or without the modifiers and fiber using Marshall mix procedures and were experimentally tested using various standardized testing procedures including percent air void for porosity, cantabro test and marshall stability. In general, the results of marshall stability showed that modified mixtures were equivalent to unmodified mixtures. Especially, the result of cantabro tested modified mixtures was superior to unmodified mixtures.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권4호
• /
• pp.377-383
• /
• 2005

This paper deals with the flow characteristics of air-water two-phase flow in a vertical tube of 10mm I.D. and 600mm in length at an adiabatic condition. The obtained experimental data were covered with the liquid superficial velocity ranging from 0.095m/s to 2.56m/s. and the gas superficial velocity ranging from 0.032m/s to 21.08m/s. The effects of the gas and liquid superficial velocity on the flow pattern transitions, frictional pressure drop, and film thickness and gas-liquid interface roughness were also examined. It was found that the film thickness increased and the liquid film wave length was more longer with the liquid superficial velocity $j_L$ increasing at $j_G$ constant. It was also showed that the frictional pressure drops were experienced in three regions. namely increasing region(bubbly flow), decreasing region (Taylor bubble and slug flows) and re-increasing region (annular flow).

• 한국재료학회지
• /
• 제32권4호
• /
• pp.223-229
• /
• 2022

A porous photocatalyst concrete filter was successfully produced to remove NOx, by mixing TiO₂ photocatalyst with lightweight aerated concrete. Ultra Fine Bubbles were used to form continuous pores inside the porous photocatalytic concrete filter, which was mixed via a bubble generation experiment. The optimal mixing condition was determined to be with 4 % of the bubble generation agent B. NO removal specimens were prepared for various photocatalytic loading conditions, and the specimen containing 3 % P-25 removed NO at a concentration of 1.03 µmol in 1 h. The NO removal rate of the porous photocatalytic concrete filter prepared in this study was 10.99 %. This photocatalytic filter performance was more than 9 times the amount of NO removed by a general photocatalytic filter. The porous photocatalyst concrete filter for removing NOx developed in this study can be applied to various construction sites and the air quality can be solved by reducing NOx contributing to the formation of fine particles.

• 대한기계학회논문집B
• /
• 제40권3호
• /
• pp.181-189
• /
• 2016

수평 관군에 대하여 수직이고 상향으로 흐르는 2상 유동에 의한 감쇠비를 예측하기 위한 해석모델이 Sim에 의하여 개발되었다. 이 모델에서 평가된 2상 유동의 기공률, 압력손실 등의 유동변수는 기존의 실험식을 사용하여 계산하였다. 그러나 관군의 경우에 사용하기에는 약간의 개선이 요구된다. 따라서 관군 내에 흐르는 2상 유동의 유동 변수에 대한 더 많은 정보를 획득하기 위하여 실험적으로 연구할 필요가 있다. 실험은 공기 - 물의 2상 유동이 흐르는 정사각형 배열 관군에서의 압력계수와 2상 유동 마찰승수를 계산하기 위하여 수행되었다. 피치 직경 비는 1.35이었고, 실린더의 직경은 18 mm이다. 압력센서와 신호처리 장치를 이용하여 관군에서의 압력차를 측정하였다. 2상 유동 마찰승수와 오일러수를 계산하기 위하여 관군에 적용되는 비균질 유동의 기공률은 Feenstra 등의 실험식을 사용하여 계산하였다. 균질과 비균질 2상 유동의 마찰승수와 오일러의 수를 실험적으로 구하고 Sim의 어림적 모델에 근거한 이론적 해석 결과와 비교 분석하였다.

• Nuclear Engineering and Technology
• /
• 제37권6호
• /
• pp.595-604
• /
• 2005

A new instrument, an average BDFT (Birectional Flow Tube), was proposed to measure the flow rate in single and two phase flows. Its working principle is similar to that of the Pilot tube, wherein the dynamic pressure is measured. In an average BDFT, the pressure measured at the front of the flow tube is equal to the total pressure, while that measured at the rear tube is slightly less than the static pressure of the flow field due to the suction effect downstream. The proposed instrument was tested in air/water vertical and horizontal test sections with an inner diameter of 0.08m. The tests were performed primarily in single phase water and air flow conditions to obtain the amplification factor(k) of the flow tube in the vertical and horizontal test sections. Tests were also performed in air/water vertical two phase flow conditions in which the flow regimes were bubbly, slug, and churn turbulent flows. In order to calculate the phasic mass flow rates from the measured differential pressure, the Chexal drift-flux correlation and a momentum exchange factor between the two phases were introduced. The test results show that the proposed instrument with a combination of the measured void fraction, Chexal drift-flux correlation, and Bosio & Malnes' momentum exchange model could predict the phasic mass flow rates within a $15\%$ error. A new momentum exchange model was also proposed from the present data and its implementation provides a $5\%$ improvement to the measured mass flow rate when compared to that with the Bosio & Malnes' model.

• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.97-106
• /
• 2009

기포콘크리트로 축조된 구조물은 하중 경감에 따른 지반의 침하와 토압을 감소할 수 있게 되어 구조물 시공과 관련한 제반 문제와 경제적 부담 저감이 가능하게 된다. 따라서 본 연구에서는 기포콘크리트의 강도향상 목적으로 다공질의 바텀애시를 기포콘크리트에 도입함으로써 과거의 방음이나 단열의 비구조적 용도 이외에도 구조적 목적에 활용하고자 하였다. 또한 시멘트 대체재로써 고로슬래그 미분말과 플라이애시의 혼입이 바텀애시로 보강된 기포콘크리트 성상에 미치는 영향을 단위체적중량, 플로우값, 공기량(기포량), 흡수율, 소요 기포제량 등을 통해 평가하였다. 실험결과, 잔골재비의 증가 즉, 바텀애시의 사용량이 증가할수록 단위체적중량은 증가하는 반면 공기량이나 플로우는 감소되는 것을 확인할 수 있었다. 그러나 적절한 비율의 바텀애시 적용은 오히려 소포의 영향이 작아져 균일한 품질의 기포콘크리트 제조가 용이한 것으로 나타났다. 고로슬래그 미분말이나 플라이애시의 무기혼화재는 시멘트 대체 비율이 증가할수록 단위체적중량이 감소되는 경향을 보이고 있으며 어느 일정 비율까지 대체하였을 때에는 유동성이 향상되는데 반해 그 이상의 대체에서는 급격한 유동성 저하가 나타났다.

• 한국터널지하공간학회 논문집
• /
• 제17권3호
• /
• pp.353-362
• /
• 2015

도시철도 지하역사에 설치되어 운영중인 승강장 안전문(PSD)은 승객의 추락방지 등 안전사고 예방에 큰 기여를 하고 있지만, 기존 승강장 선로 배기설비의 차단으로 인해, 일부 역사에서 승강장내 환기효율 저하문제를 발생시키고 있다. 본 연구에서는 PSD가 설치된 승강장의 기존 급배기 시스템의 환기효율 개선을 위해, 승강장과 대합실로 통하는 계단부 하부공간의 무효한 공간(창고)에 국부적인 하부 배기시스템을 추가하고, 승강장 배기용 덕트를 선로부의 기존 배기시스템에 연결하여 연동함으로써 기존 시스템에 무리 없이 승강장 실내환경을 개선하고자 하였다. 즉, PSD 설치이후 승강장 내부의 전체적인 기류혼합효과와 오염된 실내공기를 효율적으로 배출하기 위한 하부배기 방식을 연구하였다. 이러한 하부배기 방식의 효과를 예측하기 위하여, 서울지하철 2호선 역사를 선정하여 급배기량을 실측하고, 이를 바탕으로 전산수치해석 연구를 수행하여 개선효과를 예측해보았다. 하부 배기시스템의 적용은 승강장 기류의 지체상태 및 환기효율 특성을 나타내는 공기연령 측면에서 약 16.5%의 개선효과가 있는 것으로 분석되었다.