• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.144-158
• /
• 2012

A higher spatial resolution is preferable to support the accuracy of detailed climate analysis in urban areas. Airborne LiDAR (Light Detection And Ranging) and satellite (KOMPSAT-2, Korea Multi-Purpose Satellite-2) images at 1 to 4 m resolution were utilized to produce digital elevation and building surface models as well as land cover maps at very high(5m) resolution. The Climate Analysis Seoul(CAS) was used to calculate the fractional coverage of land cover classes in built-up areas and thermal capacity of the buildings from their areal volumes. It then produced analyzed maps of local-scale temperature based on the old and new input data. For the verification of the accuracy improvement by the precise input data, the analyzed maps were compared to the surface temperature derived from the ASTER satellite image and to the ground observation at our detailed study region. After the enhancement, the ASTER temperature was highly correlated with the analyzed temperature at building (BS) areas (R=0.76) whereas there observed no correlation with the old input data. The difference of the air temperature deviation was reduced from 1.27 to 0.70K by the enhancement. The enhanced precision of the input data yielded reasonable and more accurate local-scale temperature analysis based on realistic surface models in built-up areas. The improved analysis tools can help urban planners evaluating their design scenarios to be prepared for the urban climate.

• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.275-284
• /
• 2017

TACAN(TACtical Air Navigation) was created to support military aircraft's short range navigation (200~300 mile). TACAN must fulfill a condition of MIL-STD-291C, the U.S. Military Standards, which addresses the sum of 15Hz and 135Hz should be within 55%, following the factor of modulations for both to be $21{\pm}9%$ each. Within the existing TACAN antenna, modulation factor for 15Hz and 135Hz are created differently depending on its diameter, wavelength, angle of gradient, internal modulation method or using frequency code. It brings up a problem where applications needed to be stopped and repaired when modulating signal exceeds the standard of MIL-STD-291C since the existing TACAN antenna does not have coordination function. Hence, plan and produce a modulating signal generator using FPGA, and check the changes in the modulation factor for 15HZ and 135Hz, depending on the values that have been set in each criteria. Moreover, allow the modulating signal generator to be automatically adjusted based on the monitoring signal emitted by antenna, and place alarm sound just in case if it exceeds the standard.

• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.51-58
• /
• 1993

The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.

• Journal of Periodontal and Implant Science
• /
• v.51 no.3
• /
• pp.147-162
• /
• 2021

Purpose: This systematic review and meta-analysis was conducted to assess the effects of glycine powder air-polishing (GPAP) in patients during supportive periodontal therapy (SPT) compared to hand instrumentation and ultrasonic scaling. Methods: The authors searched for randomized clinical trials in 8 electronic databases for relevant studies through November 15, 2019. The eligibility criteria were as follows: population, patients with chronic periodontitis undergoing SPT; intervention and comparison, patients treated by GPAP with a standard/nozzle type jet or mechanical instrumentation; and outcomes, bleeding on probing (BOP), patient discomfort/pain (assessed by a visual analogue scale [VAS]), probing depth (PD), gingival recession (Rec), plaque index (PI), clinical attachment level (CAL), gingival epithelium score, and subgingival bacteria count. After extracting the data and assessing the risk of bias, the authors performed the meta-analysis. Results: In total, 17 studies were included in this study. The difference of means for BOP in patients who received GPAP was lower (difference of means: -8.02%; 95% confidence interval [CI], -12.10% to -3.95%; P<0.00001; I²=10%) than that in patients treated with hand instrumentation. The results of patient discomfort/pain measured by a VAS (difference of means: -1.48, 95% CI, -1.90 to -1.06; P<0.001; I²=83%) indicated that treatment with GPAP might be less painful than ultrasonic scaling. The results of PD, Rec, PI, and CAL showed that GPAP had no advantage over hand instrumentation or ultrasonic scaling. Conclusions: The findings of this study suggest that GPAP may alleviate gingival inflammation more effectively and be less painful than traditional methods, which makes it a promising alternative for dental clinical use. With regards to PD, Rec, PI, and CAL, there was insufficient evidence to support a difference among GPAP, hand instrumentation, and ultrasonic scaling. Higher-quality studies are still needed to assess the effects of GPAP.

• Knowledge Management Research
• /
• v.24 no.2
• /
• pp.185-209
• /
• 2023

The air travel industry, which had shrunk with COVID-19, is gaining wings again. Accordingly, this study investigated whether non-verbal communication factors experienced through interaction with airline flight attendants for passengers who have traveled abroad within the past year through domestic airlines affect customer engagement and brand intimacy. A total of 285 samples were collected, and SPSS 28 and AMOS 26 programs were used to verify the reliability and validity of the research tool, the suitability of the model, and hypotheses. As a result of the empirical study analysis, it was confirmed that Paralanguage and Proxemics in non-verbal communication of flight attendants had a significant effect on customer engagement. Although it is different from the results of previous studies following changes in perspective after COVID-19, it once again confirmed the importance of airline crew communication in providing face-to-face services at the interface with passengers. In order to induce customer engagement, which is a new customer satisfaction management index. In addition, it was confirmed that customer engagement has a significant effect on brand intimacy. These results support the view that it is necessary to establish new customer management indicators of emotion and relationship marketing in the existing marketing centered on price reduction or securing loyalty. It was confirmed that interactions with flight attendants can contribute to customer engagement, and these results have important implications for those working in the air transportation industry.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.612-618
• /
• 2023

Modern society spends more than 80% of its daily life indoors, emphasizing the need for attention to indoor air pollution due to the improvement in living standards. In this study, the performance and reaction characteristics of the Pt/TiO₂ catalysts prepared by liquid-phase reduction for the removal of formaldehyde (HCHO), one of the indoor air pollutants, at room temperature without the need for additional light or heat were investigated. As a result, it showed that catalysts prepared by the same method showed approximately 40~80% various activities depending on the type of TiO₂. XRD, BET, and XPS analyses were performed to investigate the particle size, crystal structure, specific surface area, and O/Ti molar ratio of the support material, and it revealed that the correlation between the properties and performance was insignificant. To explore the oxidation reaction pathway of formaldehyde (HCHO), in situ DRIFT analysis using carbon monoxide and H₂-TPR was perfomed. The results revealed that the performance was demonstrated by the oxidation state of the active metal and the adsorption-desorption characteristics of the adsorbate species.

• Journal of Forest and Environmental Science
• /
• v.40 no.2
• /
• pp.90-98
• /
• 2024

This study analyzes the characteristics of sound-absorbing materials made from forest by-products of the deciduous tree species Zelkova serrata (Z. serrata) by evaluating their sound absorption performance. Accordingly, sound-absorbing materials with varying sample thicknesses, leaf sizes, and drying conditions were fabricated. The sound absorption properties were measured using the impedance tube method via middle-type measurement tube (100 Hz-3,200 Hz). The sound absorption properties were evaluated using the average sound absorption coefficient (ASAC), which was calculated from the measured sound absorption coefficients at 250 Hz, 500 Hz, 1,000 Hz, and 2,000 Hz. The ASAC value significantly improved as the leaf size increased to 0.5×0.5 cm², 1.0×1.0 cm², and 2.0×2.0 cm². The ASAC values under the two drying conditions were similar. There was no significant difference in ASAC according to the leaf size under the air-dried leaf condition, with a thickness of 2.50 cm. The highest ASAC value according to the sound-absorbing material thickness was 0.47 at a thickness of 2.50 cm and leaf size of 2.0×2.0 cm² under the air-dried leaf condition. In addition, the variation in ASAC was 0.23, indicating that the sound absorption performance according to leaf thickness was more significant than the difference in absorption properties according to leaf size. A sound absorption coefficient (SAC) of 0.4 or higher was observed across the measurable frequency band (100 Hz-3,200 Hz). Furthermore, the SAC values with respect to leaf size and thickness were close to 1 in the high-frequency range above 2,000 Hz. Therefore, it is considered that sound-absorbing materials using Z. serrata leaves are advantageous in the field of absorbing noise in a high-frequency band of 2,000 Hz or more, and it is better to manufacture a thickness of 2.50 and 2.0×2.0 cm².

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.249-277
• /
• 2015

Regulation (EC) No 261/2004 ("Regulation") is a common rule on compensation and assistance to passengers in the event of denied boarding and of cancellation or long delay of flights. In some recent cases of European nations, passengers sued the air carrier in order to obtain monetary compensation under Article 7(1) of the Regulation. Some courts dismissed the actions on the grounds that, unlike denied boarding or cancellation of the flight, the Regulation provides no compensation in relation to delayed flights. However, Court of Justice of the European Union(CJEU) ruled that Regulation 261/2004 must be interpreted to mean that passengers whose flights are delayed have a right to compensation in cases when the loss of time is equivalent to, or is in excess of three hours - where the passengers eventually reached their final destination three hours or more later than the originally scheduled arrival time. It is true that a strict interpretation of the regulation would suggest that passengers whose flight has merely been delayed are not entitled to compensation. They should only be offered assistance in accordance with the Articles 6 and 9. Nevertheless, the Court recognized the same right to the same compensation for passengers of flights delayed by more than three hours as that explicitly provided for passengers of cancelled flights. On the one hand, the Court bases this ruling on the recitals of the Regulation, in which the legislature links the question of compensation to that of a long delay, while indicating that the Regulations seek to ensure a high level of protection for passengers regardless of whether they are denied boarding or their flight is cancelled or delayed. On the other hand, the Court interprets the relevant provisions of the Regulation in light of the general principle of equal treatment. Furthermore, the Court delivered a ruling that the loss of time inherent in a flight delay, which constitutes an inconvenience within the intention of Regulation No 261/2004 and which cannot be categorized as 'damage occasioned by delay' within the meaning of Article 19 of the Montreal Convention, cannot come within the scope of Article 29 of that convention. Consequently, under this view, the obligation under Regulation No 261/2004 intended to compensate passengers whose flights are subject to a long delay is in line with Article 29 of the Montreal Convention. Although the above interpretation of the Court can be a analogical interpretation, the progressive attitude of the Regulation and the view of Court forward to protect passengers' interest is a leading role in the area of international air passenger transportation. Hopefully, after the model of the positive support in Europe, Korea can establish a concrete rule for protecting passengers' right and interest.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.1
• /
• pp.3-54
• /
• 2013

Nowadays, major advanced countries in aviation technology are putting their effort to develop commercial and civil Unmanned Aircraft System(UAS) due to its highly promising market demand in the future. The market scale of commercial and civil UAS is expected to increase up to approximately 8.8 billon U.S. dollars by the year 2020. The usage of commercial and civil UAS covers various areas such as remote sensing, relaying communications, pollution monitoring, fire detection, aerial reconnaissance and photography, coastline monitoring, traffic monitoring and control, disaster control, search and rescue, etc. With the introduction of UAS, changes need to be made on current Air Traffic Management Systems which are focused mainly manned aircrafts to support the operation of UAS. Accordingly, the legislation for the UAS operation should be followed. Currently, ICAO's Unmanned Aircraft System Study Group(UASSG) is leading the standardization process of legislation for UAS operation internationally. However, some advanced countries such as United States, United Kingdom, Australia have adopted its own legislation. Among these countries, United States is most forth going with President Obama signing a bill to integrate UAS into U.S. national airspace by 2015. In case of Korea, legislation for the unmanned aircraft system is just in the beginning stage. There are no regulations regarding the operation of unmanned aircraft in Korea's domestic aviation law except some clauses regarding definition and permission of the unmanned aircraft flight. However, the unmanned aircrafts are currently being used in military and under development for commercial use. In addition, the Ministry of Land, Infrastructure and Transport has a ambitious plan to develop commercial and civil UAS as Korea's most competitive area in aircraft production and export. Thus, Korea is in need of the legislation for the UAS operation domestically. In this regards, I personally think that Korea's domestic legislation for UAS operation will be enacted focusing on following 12 areas : (1)use of airspace, (2)licenses of personnel, (3)certification of airworthiness, (4)definition, (5)classification, (6)equipments and documents, (7)communication, (8)rules of air, (9)training, (10)security, (11)insurance, (12)others. Im parallel with enacting domestic legislation, korea should contribute to the development of international standards for UAS operation by actively participating ICAO's UASSG.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.2
• /
• pp.43-54
• /
• 2014

Environmental pollution including air, land, and water has become one of the most critical issues in global interest. The damages due to environmental pollution lead to serious disasters. Nations have realized the importance of environment protection and have been starting to force organizations to implement environmental management system (EMS) as way of protecting environment. ISO 14001 requirements that are the most popular standard as EMS have been developed to support continuous improvement to environment management. It has been revised once since publication and ISO 14001 : 2004 version is currently available. Organizations globally started to acquire the certificate of EMS to observe environment related laws, accept customers' and stakeholders' request, increase market share, and fulfill implementation motives. This article examines the audit data that were collected for several years from manufacturing companies including shipbuilding, machinery, metal, automobiles, and chemical companies in southeastern Korea on the basis of ISO 14001 : 2004 requirements. The audit data were classified into minor nonconformities based on factors such as business size, business type, and EMS implementation period. We conduct hypotheses test using statistical methods in order to see if there are any significant differences based on the factors. We draw conclusions for the results of hypotheses test and address the necessities of energy, greenhouse gas, green management, and continuous improvement to enhance the efficiency of EMS implementation.