• 유기물자원화
• /
• 제12권1호
• /
• pp.104-109
• /
• 2004

본 연구는 공기주입에 의한 고형 폐기물의 빠른 안정화를 달성할 수 있는 매립지의 호기성 공정을 평가하는 것을 목표로 하였다. 실험은 매립지에서 최적의 공기주입방법을 평가하기 위해 선별토사를 충전한 4개의 모의 매립조(혐기성, 1PV(pore volume/day)공기주입, 5PV 공기주입, 10PV 공기주입)를 운영하였다. 선별토사를 충전한 bioreactor를 호기성으로 운전한 경우에 공기를 주입하지 않은 bioreactor에 비해 유기물 분해가 뛰어난 것으로 나타났다. 매립가스의 발생량 및 조성변화와 soil respiration test 결과로부터 5 PV/day으로 공기를 주입한 bioreactor가 유기물 분해율이 가장 높은 것으로 나타났다.

• 생물환경조절학회지
• /
• 제29권3호
• /
• pp.306-312
• /
• 2020

본 연구에서는 여름철 고온기 시설재배시 수시차광이 내부환경과 오이 생리적 반응에 미치는 영향을 검토하였다. 온실차광이 오이의 고온 스트레스 완화 정도를 추정하기 위하여 잎 온도, 엽기온차, 최대 카르복실화속도, 최대 전자전달 속도, 열파괴, 광호흡과 같은 오이의 생리적 반응을 측정 분석하였다. 오이 시설하우스의 차광율은 90% 수시차광, 40% 수시차광, 무차광 3수준의 실험 조건으로 하였다. 90% 수시차광은 외부 일사량이 650 W·m^-2일 때 차광되도록 하였다. 기온, 일사량, 엽온, 엽기온차, 광호흡은 90%의 수시차광에서 40% 수시차광과 무차광 처리 보다 낮은 값을 나타내었다. 최대 카르복실화속도, 광호흡율은 90% 수시차광 온실이 다른 처리구보다 유의하게 낮은 것으로 나타났다. 고온저항성을 나타내는 thermal breakdown 값은 90%의 수시차광에서 다른 처리구 보다 유의하게 높은 것으로 나타났다. 따라서, 90% 수시차광이 여름철 오이 재배에 있어 고온스트레스를 덜받는 생육환경을 조성하였다는 결과를 얻었다.

• 대기
• /
• 제17권1호
• /
• pp.109-114
• /
• 2007

The mist on the inside of an automobile windshield is not only uncomfortable but also very dangerous because it obstructs the driver's vision. However, the removal process of the mist has never been studied in detail. This study performed experiments analyzing the mechanism causes the mist in a car and investigated the appropriate removal process. The experiments were performed on two rainy days, 10 April 2006 and 26 May 2006, with temperature and relative humidity sensors of testo-175-H2 and DICKSON-TK500. We found a passenger increased water vapor by 0.2 g $min^{-1}$ through respiration and thereby relative humidity (RH) from 55% to 67% in 8 minutes. Even though RH was not saturated, misting occurred because the humid air contacted the colder surface of the window. To remove the mist, it is necessary to increase the temperature or inflow drier air in the car. Therefore, we expected that the heater would be more effective than air conditioner for this matter. However, the outcome was the other way around due to the structure of the heating and cooling system in the car. When the air-conditioner was on, colder and drier air was generated and flowed through the so-called evaporator. Droplets were produced in the evaporator due to cooling procedure. When the heater was on, the warm air evaporated the droplets and increased the water content in the air resulting in an increase of relative humidity. Consequently, the air conditioner is more effective than the heater to remove the mist.

• 한국환경보건학회지
• /
• 제2권1호
• /
• pp.25-28
• /
• 1975

The main purpose of the aeration units in activated sludge process is to enable micro-organisms to metabolize the constituents of the waste effectively by supplying sufficient oxygen for their respiration. Normally, aeration is achieved by bringing the mixture of waste and sludge into intimate contact with air. The main type of aeration unit is diffused air unit in which air is injected into the liquid in the form of bubbles. The object of these laboratory studies is to compare the performance of three laboratory scale aeration systems at various depths of submergence, aerating water with and without the addition of a surface active agent.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.833-839
• /
• 2013

Cardiopulmonary resuscitation (CPR) is performed by thoracic compression and artificial ventilation for the patient under emergent situation to maintain at least the minimum level of respiration and blood circulation for life survival. Good quality CPR requires monitoring respiration, however, traditional respiratory air flow transducers cannot be used because the transducer elements are facing the whole area perpendicular to the flow axis. The present study developed a new air flow transducer conveniently applicable to CPR. Specially designed "sensing rod" samples the air velocity at 3 different locations of the flow cross-section, then transforms into average dynamic pressure by the Bernoulli's law. The symmetric structure of the sensing holes of the sensing rod enables bi-directional measurement simply by taking the difference in pressure by a commercial differential pressure transducer. Both inspiratory and expiratory flows were obtained with symmetric measurement characteristics. Quadratic curve fitting provided excellent calibration formula with a correlation coefficient>0.999 (P<0.0001) and the mean relative error<1%. The present results can be usefully applied to accurately monitor the air flow rate during CPR.

• 한국식품위생안전성학회지
• /
• 제31권3호
• /
• pp.201-209
• /
• 2016

실내 공기질 관리의 중요성이 대두되면서 쾌적한 실내 환경에 도움을 주는 공기청정 기능과 습도 조절 기능을 동시에 갖춘 제습기와 공기청정기가 각광받고 있다. 하지만 오랜 기간 동안 공기정화제품을 사용하게 될 시에는 필터가 오염되어 본연의 기능을 상실하게 되는 것으로 알려져 있지만 이에 대한 구체적인 연구나 보고는 드문 편이다. 이에 본 연구에서는 가정과 사무실 등에서 사용한 공기정화제품을 수거하여 주요 부위별 미생물 오염도 및 주요 오염 미생물들을 분석하였다. 그 결과, 4 종류의 공기정화제품에서 오염도가 높은 부위는 필터부위, 물이 직접 닿는 부위 및 공기가 외부로부터 직접적으로 들어오는 입구부위 등에서 미생물학적 오염도가 가장 높았다. 하지만 공기정화제품은 사용하는 환경과 조건에 따라서 미생물학적 오염도 및 오염 미생물의 성상은 각각 다르게 나타났다. 하지만 이들 공기정화제품들에는 공통적으로 Staphylococcus sp., Micrococcus sp. 그리고 Bacillus sp.의 세균과 Cladosporium sp. 및 Penicillium sp.의 진균이 공통적으로 오염되어 있는 우점종인 것으로 분석되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1971-1972
• /
• 2008

Cardiopulmonary resuscitation(CPR) is an important clinical technique performing artificial ventilation and chest compression on a patient under emergent situation before arriving in hospital. Since the quality of CPR significantly affects the survival rate, it would be of great advantage to monitor respiration in real time during CPR. However, currently applied respiratory air flow transducers are difficult to apply with sensing elements in the middle of the flow axis. The present study developed a new turbulent air flow transducer conveniently applicable to CPR. Abrupt changes in diameter of the flow tube generated turbulence in air flow, thereby pressure difference was obtained to estimate the air flow rate, with no physical object on the flow plane. Expiration and inspiration were separated by the direction of the pressure difference, resulting in good symmetry. Pressure-flow relationship was tested on a quadratic model, which provided accurate enough estimation results. Therefore, the present turbulent air flow transducer seemed appropriate to monitor respiration during CPR.

• 센서학회지
• /
• 제18권4호
• /
• pp.294-300
• /
• 2009

Cardiopulmonary resuscitation(CPR) is performed by artificial ventilation and thoracic compression for the patient under emergent situation to maintain at least the minimum level of respiration and blood circulation for life survival. Quality of the pre-hospital CPR not only significantly affects the patient's survival rate but also minimizes side effects caused by CPR. Good quality CPR requires monitoring respiration, however, traditional respiratory air flow transducers cannot be used because the transducer elements are located on the flow axis. The present study developed a new technique with no physical object on the flow stream but enabling the air flow measurement and easily incorporated with the CPR devices. A turbulence chamber was formed in the middle of the respiratory tube by locally enlarging the cross-sectional area where the flow related turbulence was generated inducing energy loss which was in turn converted into pressure difference. The turbulence chamber was simply an empty enlarged air space, thus no physical object was placed on the flow stream, but still the flow rate could be evaluated. Both inspiratory and expiratory flows were obtained with symmetric measurement characteristics. Quadratic curve fitting provided excellent calibration formula with a correlation coefficient>0.999 (P<0.0001) and the mean relative error<1 %. The present results can be usefully applied to accurately monitor the air flow rate during CPR.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.163-173
• /
• 2020

Objectives: The study was evaluated exposure variation and daily absorption level of cadmium, lead concentration of ambient air of monthly data from 1999 to 2017 for main exposure factor in outdoor workers. Methods: Based on the monthly data from 'The annual report of air quality in Korea from 1999 to 2018' in 'Air Korea' website in the Korean Ministry of Environment. The monthly data of PM_2.5, PM₁₀, cadmium, lead concentration of ambient air were recalculated to average, minimum, and maximum. And these data were combined to Asian-dust exposure data from 'The annual report of Asian-dust·smog in 2017' of National Institute of Meteorological Sciences in Korea. Results: Geometric mean(minimum-maximum) concentration in ambient air of monthly data were 0.0017 (ND-0.2015) mg/㎥ in cadmium and 0.0467(ND-0.8554) mg/㎥ in Pb from 1999 to 2017. Both of Cd and Pb concentration in ambient air showed the highest concentration in January and the lowest in August among annual variation from 1999 to 2017. PM₁₀ and PM_2.5 level showed the highest in March(PM₁₀) and February (PM_2.5) the lowest in August both of PM₁₀ and PM_2.5. Discussion: Based on exposure data and prior reports, daily Cd absorption was estimated to 0.013(ND-1.511) mg/day from respiration and 1.89 mg/day from daily food(25.2 mg/day of daily Cd intake). In case of Pb, daily absorption was estimated to 0.350(ND-6.416) mg/day from respiration and 1.38-1.71 mg/day from daily food intake. Conclusion: Cd and Pb with Asian-dust have high influential factor to increase the Cd and Pb exposure at Winter and Spring season in outdoor workers.

• 한국식품저장유통학회지
• /
• 제11권3호
• /
• pp.304-312
• /
• 2004

감귤의 수확 후 저장, 유통과정에서 부패 억제 및 품질유지 효과를 얻기 위하여 환경친화적 방법으로서 중-고온 예조처리의 적용 가능성을 확인하고자, 조생종 온주 감귤의 열풍처리에 따른 저장 중 품질특성 변화를 살펴보았다. 45$^{\circ}C$에서 2, 4, 6시간 동안 열풍을 가한 다음, 충분히 냉각시킨 감귤을 통기성 천공 LDPE 필름에 포장하여 5$^{\circ}C$에서 3주, 18$^{\circ}C$에서 1주간저장하면서 호흡률, 과실내부 기체조성,pH, 산도, 가용성 고형분 함량, 과피 표면색, 생체 중량 감소율, 경도, 부패과 발생률, 관능특성 등을 평가하였다. 열풍처리 직후 초기 호홉률은 처리구 모두 무처리구와 비교하여 높았으나 처리시간과는 유의적 상관성이 없었고, 저장 중처구 감귤의 호흡률은 감소하여 21일째는 무처리구와 유사한 수준을 나타내었다. 과실내부 기체조성은 처리구간에 유의적인 차이를 보이지 않았으며, 과즙의 pH, 산도, 가용성 고형분 함량 및 과실의 생체 중량감소와 경도, 과피 표면색 역시 열처리에 의해 거의 영향을 받지 않았다. 한편 부패과 발생률에 있어서는 4시간 이상의 처리구가 꼭지 썩음 현상과 곰팡이 발생정도, 검은 썩음병인 표피 흑변 정도에서 저장 중 낮은 수준을 나타내었다. 그러나 외관품질 및 체감품질에 대한 관능평가에서는 열풍처리구와 무처리구 사이에서의 유의적인 차이를 발견할 수 없었다. 결론적으로 45$^{\circ}C$, 4-6시간의 제한적 열풍처리는 조생 온주 감글의 저장 중 부패과 발생률을 현저히 감소시킴으로서 수확 후 품질유지에 효과적인 중-고온 예조처리 조건임을 확인할 수 있었다.