• 유기물자원화
• /
• 제31권3호
• /
• pp.93-102
• /
• 2023

본 연구는 NOx, SOx를 동시 제거하는 방법에 추가로 대기 중에 존재하는 중금속 오염물질에 대해 처리가능한지를 스크러버에 산화제와 환원제를 마이크로버블 장치에 투입하여 2차 오염물질이 발생 되지 않는 친환경적인 처리방식을 연구하고자 하였다. 마이크로버블로 처리하고자 하는 대기 중 중금속 물질은 납화합물(Pb)을 선정하여 제거효율을 확인하였다. 마이크로버블을 스크러버에 연결하여 처리함으로써 NOx, SOx 뿐만 아니라 대기 중 중금속 물질 저감효과 및 비용 절감과 2차 환경오염물질이 발생 되지 않는 것을 확인하였다. 본 연구를 통하여 기존에 SCR과 같이 고비용의 처리방식이 아닌 친환경적인 방법을 적용하여 저비용으로 NOx, SOx, 중금속을 동시 제거가 가능하였으며, 산화제와 환원제 및 마이크로버블을 적절히 사용하면 경제적이고 효율적인 대기오염물질 처리가 가능하였으므로 환경방지시설의 기술 발전에 도움이 될 것으로 기대된다.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.256-273
• /
• 2023

Among the dyeing industries, the tenter process is a process that improves the quality of fibers by drying and ironing (heat treatment) dyed fabrics, and drugs such as water repellents, antistatic agents, and fiber softeners are mainly used in these tenter processes. These drugs are vaporized in the process of treatment by high temperatures (180 ~ 230℃), and are observed in a complex form such as white smoke, oil mist, and fine dust, causing odor. To treat the complex exhaust gas at the rear end of the tenter facility, most companies operate by installing a wet scrubber and an adsorption tower alone or in parallel, but there are many problems. In particular, the insoluble oil mist at the rear end of the tenter has significantly low processing efficiency in the cleaning dust collection facility, and there is a problem in the facility by adsorption due to the occlusion phenomenon caused by the oil mist. In addition, the odor gas at the rear end of the tenter contains a lot of aldehydes, and in order to improve these various problems, a complex exhaust purification device using cyclone and electric support collector was developed. This study examined the applicability of economical and efficient technology by removing complex air pollution at the rear end of the tenter and applying improved technology than the existing technology.

• 환경위생공학
• /
• 제17권2호
• /
• pp.26-33
• /
• 2002

Ultimate objective of industrial hygiene is the prevention of health impairment that may result from exposure to chemicals at workplace. Workers in solvent thinner-using occupation environment may be highly exposed to VOCs (volatile organic compounds) because solvent thinner has been used extensively such as painting, spraying, degreasing, coating and so on in Korea. The purpose of this study was to recognize, evaluate, and propose the control methods of VOCs from solvent thinner-using workplace. Five target volatile organic compounds (benzene, toluene, ethylbenzene, o-xylene, and m-xylene) were monitored in H company of Shiwa Industrial Complex and analyzed in perosnal, occupational indoor and outdoor during working hours simultaneously. Engineering control such as local ventilation should be made in considering the long-term exposure, though measured VOCs concentration did not exceed the workplace exposure standards. In addition, air cleaning device should be installed in local ventilation because Shiwa Industrial Complex has had the serious ambient air pollution. Currently, environmental purification using $TiO_2$ photocatalyst have attracted a great deal of attention with increasing number of recent environmental problems. In this study, $TiO_2$ sol coated on the ceramic bead was prepared by sol-gel method and the photodegradation of target compounds was investigated in gas phase by the exposure to UV-A lamp(365nm) in a batch system.

• 한국대기환경학회지
• /
• 제22권3호
• /
• pp.353-360
• /
• 2006

This study identified a particle size distribution (PSD) of fine particulate matter and emission characteristics of V and Ni by the comparison between anthropogenic sources of oil combustion (industrial boiler, oil power plant, etc.) and lab-scale combustion using a drop-tube furnace. In oil combustion source, the mass fraction of fine particles (less than 2.5 micrometers in diameter) was higher than that of coarse particles (larger than 2.5 micrometers in diameter) in $PM_{10}$ (less than 10 micrometers in diameter) as like in lab-scale oil combustion. In addition to this, it was identified that ultra-fine particles (less than 0.1 micrometers in diameter) had a large distribution in fine particles. Toxic metals like V and Ni had large mass fractions in fine particles, and most of all was distributed in ultra-fine particles. Most of ultra-fine particles containing toxic metals have been emitted into ambient by combustion source because it is hard to control by the existing air pollution control device. Hence, we must be careful on these pollutants because it is obvious that these are associated with adverse health and environmental effect.

• 환경정책연구
• /
• 제14권2호
• /
• pp.133-148
• /
• 2015

폐유의 발생량에 비해 폐유 정제업체수가 크게 증가하여 폐유의 물량이 부족하고, 수거경쟁으로 인해 과도한 비용이 투입되고 있으며, 질이 나쁜 폐유를 함께 수거해 정제하고 있어 환경오염의 가능성이 높다. 과도한 비용으로 인한 정제유의 가격 상승은 소비자에게 부담을 주고 있다. 이러한 상황을 해결하기 위해 폐유 재활용 활성화 방안을 제시하였다. 재활용 활성화 방안 첫 번째로 부족한 폐유 물량 확보를 위한 폐유 수입은 선진국으로부터 가능하다. 수입국의 국제공인기관에서 품질검사를 실시한 후 국내에 반입 시 석유품질관리원에서 이중으로 검사를 실시하여야 하여 철저한 관리가 필요하다. 폐유 정제 비용 중 큰 비율을 차지하는 수분 및 침전물 품질기준의 완화를 고려하였으나, 이 경우 침전물의 함량이 높아져 환경적으로 문제가 될 수 있기 때문에, 영향이 적은 수분을 따로 측정하여 기준을 완화하고 침전물의 기준은 2%로 유지하였다. 마지막으로 폐유를 난방기 연료로 사용하는 경우가 있어 환경오염의 가능성이 있으며, 적절한 관리가 요구된다. 폐유난방기 사용은 품질이 우수한 자동차용 폐윤활유를 연료로 사용하고, 대기오염방지장치가 포함되어 있다면 사용가능하다. 폐기물 발생자 처리원칙에 부합되고, 품질이 우수한 폐유를 수거과정과 처리과정을 통해 투입되는 비용을 절감할 수 있다.