충격쇄파압은 권파성 파랑이 구조물 전면에 갑자기 충돌할 때 발생하며 접촉면에서 공기포켓의 생성여부에 따라 충격쇄파압의 작용특성이 달라진다. 수괴의 직접적인 충돌에 따른 Wagner형은 접촉면에서 단일 압력 첨두치를 보이는 반면, Bagnold형은 공기포켓의 진동에 의하여 비접촉면에서도 압력의 첨두치를 보이는 특성이 있다. 본 연구에서는 시공 중의 수중터널 벌크헤드의 배면(육측면)에 발생하는 충격쇄파압을 고찰하였다. Navier-Stokes 방정식을 직접 푸는 수치해석을 적용하여 벌크헤드 인근에 발생하는 쇄파를 모의한 결과, 벌크헤드의 배면에서 강한 Bagnold형 충격쇄파압이 발생함을 확인하였다. 본 충격쇄파압의 존재는 동일 조건에 대하여 수행한 수리모형실험에 의해서도 확인되었으며, 실험결과와 수치해석결과가 대체적으로 유사한 성향을 보임을 확인하였다.
There are several methods used for screening and evaluating anti -inflammatory agents. Among these, 'Granuloma pouch' technic introduced by Hans Selye is considered as a simple and reliable method. The procedure of 'Granuloma pouch' technic is as follows: Rats were used as experimental animals. An air pocket was produced in the subcutaneous tissue of the mid-dorsal portion between the shoulders by the injection of 25ml of the air which was immediately followed by injection of 1 ml of 1% croton oil as irritant. Inflammatory exudate accumulated in the pouch during the succeeding 14 days. After sacrificing the rats on the last day of the experiment, the amount of the exudate in the pouch and the weight of the granuloma tissue was measured. The author observed and compared the anti-inflammatory activities of the several steroid compounds when they are given by different methods. 1. In the control rats, the amount of inflammatory fluid and the weight of the granuloma tissue after 14 days were 9ml and 3gm respectively. 2. Injection of hydrocortisone 1.5mg subcutanenusly, 24 hours prior to pouch formation into the area where the pouch is to be formed, successfully prevented the inflammatory processes. 3. Injection of hydrocortisone 1.5mg in the air pocket formed 24 hours prior to croton oil injection was ineffective. 4. Injection of hydrocortisone into the pouch at a distance of 5mm apart from the pouch formation did not prevent the development of inflammation. 5. Anti-inflammatory activities of hydrocortisone administered systematically(injected intramuscularly into the area which is not related to the area of pouch formation) for 10 days were proportional to the doses of hydrocortisone administered. 6. DOCA, testosterone, and progesterone did not show the anti-inflammatory activity.
본 연구는 도시화 과정에서 발생한 도시 열섬현상을 완화하기 위해 도시 내에서 시행할 수 있는 생활권 녹지 조성 방법인 근린공원 조성, 소공원 조성, 주차장 녹화, 가로수 식재, 옥상·벽면 녹화 다섯 가지의 유형에 대해 세부 녹화 시나리오를 설정하여 열환경 개선 효과를 정량적으로 분석하는 것을 목표로 한다. 열환경 개선 효과를 확인하기 위해 미기후 시뮬레이션 프로그램인 ENVI-met 4.4.6v 모델을 활용하였다. 분석 결과, 공원의 식재 밀도가 높아질수록 기온이 낮아졌으나 사람이 느끼는 온열 체감 정도인 열쾌적성 지수 PET는 기온과 정비례하지 않았다. 수목이 증가하며 기온은 감소하였으나 상대습도가 소폭 증가 및 풍속이 다소 감소하였으며, 특히 PET에 많은 영향을 미치는 평균 복사온도가 수목 밀도와 정비례하지 않아 PET 역시 기온과 다른 양상을 보였다. 소공원은 한 개소 조성 후 효과를 확인하였을 때 최대 56m 반경까지 기온 저감 영향을 주었고, 250m 간격으로 세 개소를 추가 조성한 경우 기온 저감 범위가 약 12.5% 증가하였다. 기온과 달리 PET는 식재된 수목 영역 인근만 영향을 미쳐 소공원 조성 후 주변 환경의 열쾌적성은 큰 차이를 보이지 않았다. 지표면 포장을 아스팔트에서 잔디블록으로 변경하거나 옥상 및 벽면녹화 시행 등은 직접적인 일사 차양의 역할을 하지 않으나 기온 저감에 긍정적인 효과를 주었고, PET는 세 유형 모두 조성 전후 유의미한 차이를 보이지 않았다. 가로수는 식재 간격이 좁을수록 더 높은 기온 저감 효과를 보였으나, PET는 수목 밀도와 정비례하지 않았다. 가로수 하부 관목 식재의 경우 기온 저감에는 큰 영향을 주지 않으나 열쾌적성 개선에는 긍정적인 영향을 주었다. 본 연구는 도시 열섬현상 해소를 위한 생활권 녹지 조성 전략을 개괄적으로 제시하고 효율적인 열환경 개선을 위한 세부 전략을 수립하는 데에 활용될 수 있을 것으로 판단된다.
This study deals with the characterizing and the application like as insulation materials in the joint part in concrete surface layer and waterproofing sheet especially for roof slabs. Using steel materials and butil-rubber tape to band waterproofing sheet and concrete surface together before this waterproofing system will be applied. It can be expected to both the curability and the watertightness by coating poly-urethane 2 or 3 times with sheet surface. Therefore this waterproofing system can be possible to protect water without the damage when vapor is going out from concrete and without air pockets because of the difference temperature inside and out. This system particularly consists of air bents and elastic waterproofing sheet considering the physical damage while water can cause purely physical damage. This system is one of the most efficient ways of waterproofing system without air pocket.
항공기나 발전용 가스터빈(gas turbine) 및 대용량 압축기(compressor) 등과 같이 흡입공기의 유량이 매우 클 경우, 유입되는 공기 내부에 함유된 입자상 오염물질은 터빈의 기계적 성능에 큰 장애를 일으킬 수 있다(Klink and Schroth, 1996, Schroth, 1993). 이러한 입자상 오염물질을 효과적으로 제어하기 위해서는 처리기체의 유입구 부분에 대형 공기 정화용 여과시스템이 요구되며, 일반적으로 카트리지형 에어 필터(cartridge air filter)나 포켓형(pocket), 카세트형(cassette) 에어 필터가 적용 현장의 조건에 따라 사용된다. (중략)
In order to reduce the time and cost for assembly, automobile speaker grills have been injection molded with door trims or map pockets in one piece recently. However, several defects such as short shots or air traps can easily occur due to the decreased fluidity of the melting polymer according to the excessive heat transfer to the mold. Therefore, it is necessary to optimize the resin feed system and predict possible defects by CAE analysis. However it is not possible to obtain exact analysis results for the speaker grill by using general shell elements since the heat transfer in the thickness direction which is the dominant factor of the filling stage can not be considered. Therefore, there have been several efforts to simulate the injection molding nature of the speaker grill by using shell elements with an effective thickness which is smaller than the actual thickness of the part. Two empirical values have been recommended for the effective thickness in real practice. One is 50∼70% of the thickness of the speaker grill and another is the gap distance between the adjacent holes. In this paper, CAE analyses of a map pocket with a speaker grill were conducted using shell elements with both of these recommended effective thicknesses, and the predicted flow fronts were compared with the findings from injection molding experiments. The commercial code MOLDFLOW was used for injection molding analysis and an 850 ton injection molding machine was used for experiments.
An experiment has been performed using a facility, which simulates the safety depressurization system (SDS) and in-containment refueling water storage tank (IRWST) of APR1400, an advanced PWR being developed in Korea, to investigate the dynamic load resulting from the blowdown of steam from a steam generator through a sparser. The influence of the key parameters, such as air mass, steam pressure, submergence, valve opening time, and pool temperature, on frequency and peak toads was investigated. The blowdown phenomenon was analyzed to find out the real cause of the initiation of bubble oscillation and discrepancy in frequencies between the experiment and calculation by conventional equation for bubble oscillation. The cause of significant damping was discussed and is presumed to be the highly tortuous flow path around bubble. The Rayleigh-Plesset equation, which is modified by introducing method of image, reasonably reproduces the bubble oscillation in a confined tank. Right after the completion of air discharge the steam discharge immediately follows and it condenses abruptly to provide low-pressure pocket. It may contribute to the negative maximum being greater than positive maximum. The subsequently discharging steam does not play as at the driving force anymore.
The purpose of this study is to develop a high-strength, high-toughness, thin-walled aluminum shock absorber housing product by applying a high vacuum die casting method to improve internal gas defect and formability. The analysis program dedicated for the casting was used because it was too costly and time-consuming to adopt the gating system design. The final casting plan was designed based on the flow pattern of the material filled into the mold and the result of air pressure and air pocket after the material was completely filled in the mold. Gaty shape was designed as a split type. The runner was designed to have the same shape as the initial inlet curve of the cavity, and the flow of the molten metal was prevented from turbulent flow. The most favorable results were obtained when the injection speed was $V_2=4.0m/s$. Defects on pores were reduced by applying high vacuum level inside the mold.
최근 들어 서울시를 비롯한 대도시에 건립되는 초고층건물은 주변 공기의 대류를 변화시켜 난류현상을 유발하여 빌딩바람과 도시열섬 및 대기오염 물질 집적 등 주변 환경에 영향을 미치고 있다. 그 중에서도 고층건물의 주변지역의 기온의 공간적 변화는 환경 경사가 심한 것으로 판단된다. 이에 본 연구에서는 서울시 강남구의 초고층건물 지역과 인접 지역의 기온차이를 파악하고자 2008년 3월 16일부터 2009년 3월 15일까지 고정관측과 이동관측을 수행하였다. 타워팰리스(TPL)와 숙명여고(SMG)의 거리는 불과 200m이지만 두 관측지점의 연평균 기온차는 $0.7^{\circ}C$로 관측되었고, TPL의 열대야 일수는 13일, SMG는 5일이었다. TPL의 기온이 다른 곳보다 높은 것은 고층건물에 의한 도로협곡으로 인해 sky view factor가 현저히 낮아 장파복사의 대기 중 방출이 억죄되 도시열섬현상을 가중시키고 냉난방의 단위면적 당 전력 수요가 높아, 이로 인한 인공폐열이 도로협곡에 갇혀 고층건물 지역인 TPL의 열섬현상이 인접 지역보다 높은 것으로 관측되었다.
This study analyzed the expressive characteristics of padding in contemporary fashion. The methodology of this study was quantified through documentaries, fashion collections, and internet news. The results of expressive characteristics and methods were as follow. First, variability showed the creation of dwelling space by air filling, detail mode by zipper, and diversity of recycled filling by zipper pocket. It reflected the pursuit of nomadism and subversion of permanence by change of filling. Second, it was sexual symbolicity that showed the blurred androgynous silhouette by air filling and padding bar design of the chest, stomach, shoulder for the male body silhouette. It emphasized male sexual identity and power through the expression of a modern ideal body. Third, decoration displayed various crafts (such as knitting), various fabric such as polapolis, suedette, corduroy, denim, leather, knit, and spangle. It reflected visual pleasure, scarcity and various interpretations. Fourth, playfulness character forms throug hair filling, unfamiliar fashion items, diversity of silhouette and change of uses. It reflected a pleasant feeling through astonishment and surprise, nostalgia involved in memory and childhood play and disembarrassment from reality. Fifth, simplicity showed the elimination of a sportswear's factor with regular wad quilting, elimination of wad quilting, wad quilting following the structural line of clothes and the structual line of clothes omitted. It reflected disembarrassment from stereotype and an emphasis on essential elements.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.