아끼바레 및 밀양 23호 쌀 전분의 이화학적 성질, 전분 gel의 노화 및 음이온에 의한 호화양상을 조사하였다. 두 전분입자의 성상은 다각형이며 입자의 크기는 $3{\sim}6{\mu}m$ 정도였으며, 아끼바레가 밀양 23호 보다 다소 작았다. 두 전분의 X-ray 회절도는 A형으로 peak 형태와 강도에서 약간의 차이를 보였다. 아끼바레 및 밀양 23호 쌀 전분의 아밀로스함량은 각각 18.5 및 19.5%이었고 물 결합능력은 106 및 100%이었다. 팽화력은 $50^{\circ}C$까지는 큰 변화가 없었으나 이후에 급격히 증가하였고 밀양 23호 쌀 전분의 팽화력이 더 컸다. 전분 현탁액(0.1%)의 광투과도는 두 전분 모두 $60^{\circ}C$ 이후에서 급격히 증가하였으며 밀앙 23호 쌀 전분이 더 큰 광투과도를 보였다. 음이온에 의한 아밀로 그람 pattern은 NaCl과 NaF는 동일하였고 NaSCN과 NaI는 유사였다. 호화온도 및 최고점도시의 온도는 SCN-${SO_4}^=$의 순으로 증가하였고 SCN- 및 I-이온은 최고점도를 증가시켰으나 NaCl은 감소시켰다. ${SO_4}^=$ 이온을 첨가한 경우 점도는 계속 증가하였고 최고점도에 도달하지 않았다. 아끼바레 및 밀양 23호 전분 gel을 $21^{\circ}C$에서 저장한 경우 시간 상수가 각각 6.72 및 6.42일이었다.
장명품종(SA10, NTZN, 잠109, J037 및 설악)과 단명품종[한강, 괴축, PR, 천문 및 Daizo(sdi)]의 幼蟲, 용, 成蟲의 발육단계별 및 암수별 체액단백질의 변화과정을 전기영동상의 패턴에 의해 비교 분석하였다. Native 전기영동상 분석 결과로 볼 때, 용 1일째의 體液 蛋白質은 MHP-a, b, c 패턴에 따라 長命特異群(MHP-Ⅰgroup), 短命特異群(MHP-Ⅱgroup) 및 張${\cdot}$短命混合群(MHP-Ⅲgroup)등 3개의 단백질 유형으로 분류할 수 있었다. MHP-Ⅰgroup에는 SA10, 잠109, J037이, MHP-Ⅱgroup에는 한강, 천문, Daizo(sdi)가, MHP-Ⅲgroup에는 NTZN, 설악, 괴축 및 PR의 품종들이 각각 분포하고 있었으며, 이들 group내 소속 품종의 MHP패턴은 거의 유사하였다. 그리고 이들 MHP-a, b, c는 용의 발육에 따라 영동상의 변화를 보였다. 최단명품종인 Daizo(sdi)의 경우, 성충 1일 암컷과 수컷 모두 MHP-c가 뚜렷하게 존재하는 반면 최장명품종인 J037에서는 이 단백질이 관찰되지 않는 등 성충 체액 단백질 패턴에 있어서 J037과 Daizo(sdi)의 품종간에 뚜렷하게 차이가 인정되었다. 그러나 이들 단백질 밴드상의 수명의 장${\cdot}$단과 직접적인 관계가 있는 것인지 또는 수명과 관련된 특정 단백질 밴드가 존재하는지 등에 대해서는 앞으로 추구할 연구과제로 남는다. 한편, 최장명 J037품종과 최단명 Daizo(sdi) 품종의 체액단백질에 대한 SDS-PAGE상의 영동패턴을 비교 분석 결과, 幼蟲期, 용期 및 成蟲期에 있어서 장${\cdot}$단명 품종간에 단백질 패턴의 차이보다는 양적인 변화가 뚜렷하였다.
The aim of this study was to investigate the physical properties of visible light curing Glass Ionomer cement for restorative esthetic filling. The control group was the autopolymerizing GC Fuji II Glass Ionomer cement (2.2: 1 P/L ratio) and the experimental groups were made by following procedure. To induce the polymerization by visible light, the powder of GC Fuji II GI cement and the liquid of Vitrabond for base & liner were mixed in an amalgam capsule with 2.5:1, 3.0:1, 3.5:1 P/L ratio (% wt/wt). After fabrication of specimens, compressive strength, fracture toughness ($K_{IC}$) Scanning Electron Microscope and X-ray Diffraction, water-leachable content, marginal leakage and surface roughness were studied. The results were as follows: 1. Only experimental No. 1 group (visible light curing) showed less compressive strength than control group 1 hour after curing. Strength was increased with aging in all groups, so the compressive strength of light curing groups was no less than that of autopolymerizing group after 3 weeks. 2. Experimental No.3 group (visible light curing) was inferior to No.2 group (visible light curing) in fracture resistance but light curing groups were more resistant to fracture than autopolymerizing group and showed ductile fracture pattern as compared with the brittle fracture pattern of autopolymerizing group. 3. From scanning electron microscopic image, various sized unreacted powder particles, surrounded by silica gel, were embedded in polysalt matrix. Light curing groups showed little crack and more dense unreacted particles than autopolymerizing group. 4. From X-ray diffraction analysis, GC Fuji II Glass Ionomer cement powder and all groups showed glassy appearance but light curing groups seemed to be more intensive in crystaline than autopolymerizing group. S. The most significant dissolution was shown in early setting period in all group. Light curing groups were dissolved less than autopolymerizing group. 6. Marginal leakage was not different significantly in case of cavity margin composed of same tooth structure (ex. only enamel margin, only dentin margin) but much more leakage was shown in dentin/cementum margin than enamel margin. In only case of only enamel margin, light curing groups were superior to autopolymerizing group. 7. All groups showed relatively smooth surface, which irregularity was less than $1{\mu}m$. Light curing groups were smoother than autopolymerizing group.
The purpose of this study was to observe in vitro chloride corrosion behavior from 5 kinds of amalgam (Caulk spheracal, Amalcap, Dispersalloy, Tytin, Sybralloy) as a function of time after tritruration by using potentiostat. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by the mechanical amalgamator, the triturated mass was inserted the cyrindrical matal mold ($12{\times}10mm$) and was condensed by using routine manner. The specimen was removed from the mold and was stored at room temperature for 1 week, 1 month and 3 months, and standard surface preparation was routine carried out. The 0.9% saline solution was used as electrolyte in pH 6.8~7.0 at $30{\pm}0.5.^{\circ}C$. The open circuit potential was determined after 30 minutes' immersion of 1 week, 1 month and 3 month old specimens. The scan rate was 1 mV/sec and the surface area of amalgam exposed to the solution was $0.65\;Cm^2$ for each specimen. All potentials reported are with respect to a silver / silver chloride electrode (SSE). The following result was obtained. 1. All amalgam specimens became more noble corrosion potentials which represent the improved corrosion resistance as the time elapsed. 2. Three kinds of high copper amalgam always exhibited more noble potential than low copper amalgam at 1 week, 1 month and 3 months. 3. Two kinds of low copper amalgam had the similar polarization curve pattern with 3 current peaks at each time period and current densities associated with these peaks were decreased as aging especially in caulk spherical amalgam. 4. All kinds of high copper amalgam had the similar polarization curve pattern with absence of prominent current peak at each time period, but the polarization curve of D amalgam had one apparent current peak at 1 week.
연구목적: 국내 항만시설의 진단을 통한 성능 및 안전에 대한 점검과 진단을 20년 넘게 진행되었지만 그 진단 이력과 결과를 활용한 중장기적인 시설개선과 성능개선을 위한 발전전략이나 방향이 현실적으로 작동하지 않고 있다. 특히, 사용년수가 오래된 항만구조물의 경우, 선박의 대형화와 사용빈도 증가, 기후변화로 인한 자연재해의 영향 등으로 안전성능과 기능적 면에서 상당히 많은 문제점을 내포하고 있다. 연구방법: 본 연구에서는 중력식 안벽에 대한 부재수준의 유지관리 이력 데이터를 수집하여 이를 빅데이터로써 정의하고 해당 데이터를 바탕으로 프로젝트 수준의 시설물의 노후화 패턴 및 열화를 추정하기 위한 예측근사모델을 도출하였다. 특히 GP 및 SGP 기법의 머신러닝 알고리즘을 통하여 생성된 상태기반 노후도 패턴 및 열화 근사모델에 대한 유효성 검토를 통해 빅데이터 활용에 적합한 모델을 상호비교하고 제안하였다. 연구결과: 제안된 기법의 적합성을 검토한 결과 GP기법은 RMSE 및 R2는 0.9854와 0.0721, SGP기법은 0.7246과 0.2518로 GP기법을 적용한 예측모델이 적합한 것으로 검토 되었다. 결론: 머신러닝 기법을 통해 이러한 연구는 향후 항만시설 데이터취합이 지속적으로 이루어진다면 향후 항만시설 투자의사결정에 중요한 역할을 할 것으로 기대한다.
본 연구는 고령화사회에서 노인의 경제활동과 사회참여가 노인 개인뿐만 아니라, 지역 사회 및 국가 전체에 긍정적 파급효과를 미칠 수 있다는 전제를 바탕으로, 우리나라 노인의 경제활동과 사회참여에 대한 시간 배분의 패턴 및 그 변화를 통계청에서 조사한 1999년, 2004년, 2009년 『시간활용조사』를 통해 경험적으로 분석하고자 하였다. 시간 배분과 패턴에 대한 기술적 분석결과, 60-64세 노인의 유급노동 시간이 빠르게 감소하는 반면, 수동적 여가시간은 상대적으로 느리게 증가하는 것으로 나타났다. 그러나 적극적 여가활동만을 비교하면 사회기여적·대인관계 중심적인 여가활동이 감소하고, 자기계발 및 신체적·정신적 건강 증진을 목적으로 하는 개인중심적 여가활동은 증가하는 것으로 나타나, 경제활동 및 사회참여에 배분하는 시간이 전반적으로 감소하고 있는 것으로 나타났다. 이러한 경향은 1930년대 후반 출생집단에 비해 1940년대 후반 출생집단에서 강하게 나타났다. 이것은 노인의 경제활동과 사회참여를 필요로 하는 시대적 요구와 상반되는 것으로 정책적 대응이 필요함을 보여준다. 노인의 여가활동을 종속변수로 하는 토빗분석 결과, 개인중심적 여가활동에 소비하는 시간은 최근에 이를수록 증가해왔으며, 고학력 집단일수록 증가하는 것으로 나타났다.
오늘날의 어촌은 심각한 고령화와 인구유출로 지역소멸의 위기에 처해있다. 최근 어촌지역을 대상으로 추진되고 있는 사업이나 연구들의 경우 어촌을 외부인 중심적 시각으로 바라봄으로써, 일상생활 공간으로서의 어촌 공간에 대한 지역민 중심적 이해가 부족한 상황이다. 이에 본 연구에서는 어촌 지역 정주환경에 대한 이해를 목적으로, 어촌 거주민들의 이용 행태를 분석하여 어촌지역 외부공간 이용행태의 특성과 생활상을 이해하고 이를 바탕으로 장래 어촌공간 계획의 개선사항을 도출하고자 하였다. 이를 위해 우선 연구참여자들을 대상으로 한 설문과 마을주민들이 직접 작성한 마을지도를 통해 마을 거주민의 공간인식을 살펴보았으며, GPS를 통해 주민들의 마을 공간 이용행태를 분석하였다. 분석 결과 어촌 주민들은 어업 등의 생산활동에 집중하여 그 밖의 여가활동 등의 공간에 대한 인식이 부재한 것으로 나타났으며, 행태분석을 통해 나타난 실제 이용 공간도 어항구역을 중심으로 어촌계사무실·선착장 등 생산활동 관련 시설 및 공간에 집중되어 있었다. 이러한 마을 내 공간의 단조로운 이용행태는 대상지 내 이용 가능한 시설의 절대적 부족에서 기인한 것으로 보인다. 이는 마을 내 시설들이 관광객 유치를 목적으로 도입되어 주민들의 생활 편의성과 이용성이 고려되지 않았음을 보여준다. 따라서 향후 어촌지역 주민들의 삶의 질 개선을 위한 마을 재생사업 추진 시에는 어촌지역민들의 공간인식과 이용에 대한 이해가 선제적으로 고려되어야 할 것이며, 본 연구의 결과가 이러한 어촌마을 공간과 주민들의 공간이용에 대한 이해의 기초자료로 유용하게 활용될 수 있을 것으로 판단된다.
Purpose: At the moment, a lot of poor older people live in permanent rental housing in Korea. But many rental apartments are not suitable for elderly living because most of them have many problems related to the lack of accessibility and adaptability for older people with physical and mental disabilities. So it is necessary to upgrade the old permanent rental housing for convenience of elderly living. The purpose of this paper is to construct basic data for remodeling of worn out and small rental housing block in order to realize the concept of "Aging in Place". Methods: Questionnaires and interviews about elderly living have been conducted on 104 elderly who live in Suwon Wooman permanent rental apartment block which was constructed 21 years ago. From the collected data, dining pattern, inconvenient area, small area, satisfaction level on unit area and demand for unit expansion type have been analysed in order to find out the direction for remodeling of permanent rental apartment unit. Results: The problems of existing permanent rental apartment can be summarized into improper laundry space, small dining area, inconvenient bath and so on. According to the family size, the elderly resident has the different preference about the expansion type of his resident unit. Big families usually want to enlarge their living unit though they pay for additional monthly rental fee. Implications: Lifetime home concept adopting Universal Design has to be applied to the whole residential block especially to the social rental housing. And this concept had better be expanded to Lifetime neighbor design.
Lee, Sanghoon;Jung, Min Hee;Oh, Hyun Ju;Koo, Ok Jae;Park, Se Chang;Lee, Byeong Chun
한국수정란이식학회지
/
제31권3호
/
pp.179-183
/
2016
Even though klotho deficiency in mice exhibits multiple aging-like phenotypes, studies using large animal models such as pigs, which have many similarities to humans, have been limited due to the absence of cell lines or animal models. The objective of this study was to generate homozygous klotho knockout porcine cell lines and cloned embryos. A CRISPR sgRNA specific for the klotho gene was designed and sgRNA (targeting exon 3 of klotho) and Cas9 RNPs were transfected into porcine fibroblasts. The transfected fibroblasts were then used for single cell colony formation and 9 single cell-derived colonies were established. In a T7 endonuclease I mutation assay, 5 colonies (#3, #4, #5, #7 and #9) were confirmed as mutated. These 5 colonies were subsequently analyzed by deep sequencing for determination of homozygous mutated colonies and 4 (#3, #4, #5 and #9) from 5 colonies contained homozygous modifications. Somatic cell nuclear transfer was performed to generate homozygous klotho knockout cloned embryos by using one homozygous mutation colony (#9); the cleavage and blastocyst formation rates were 72.0% and 8.3%, respectively. Two cloned embryos derived from a homozygous klotho knockout cell line (#9) were subjected to deep sequencing and they showed the same mutation pattern as the donor cell line. In conclusion, we produced homozygous klotho knockout porcine embryos cloned from genome-edited porcine fibroblasts.
This study was carried out to offer basic data that can be used for clothing industry for active senior males emerging as a new consumer bracket in the rapid aging age. To this end, this study conducted a questionnaire survey on consumers' wearing condition targeting active senior males. As a result of the questionnaire survey targeting active senior males, the outdoor wear items that they had the most were windbreaker jackets, long pants, and they said the most important reason for their preferred brand was wearing sensation. The matters to consider in purchasing outdoor wear were also wearing sensation and size. Consequently, the active senior males regard wearing sensation as very important. The measurements that they felt uncomfortable by body part were the abdominal extension circumference, sleeve length and jacket length of a jacket, and the rise and lengths of pants. To design the outdoor wear patterns suitable for the active senior male's body type, the pattern measurements of these body parts need to be modified. From the fact-finding survey result on outdoor wear companies, their measurement indicating method was the same for jackets, but each brand used different methods for pants. Based on the results of this survey, outdoor wear needs to be developed to meet active senior needs.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.