• Computers and Concrete
• /
• 제16권2호
• /
• pp.275-285
• /
• 2015

This paper reports the results of an experimental study on the compressive strength and the stress-strain curve (SSC) of recycled fine glass aggregate concrete with different replacement percentages of recycled fine glass aggregate. The results show that the recycled fine glass aggregate contents have significant impact on the workability, compressive strength, the elastic modulus, the peak and the ultimate strains of recycled fine glass aggregate concrete. Analytical expressions for the stress-strain relationship of recycled fine glass aggregate concrete are given, which can satisfactorily describe the effect of the recycled fine glass aggregate on the SSC.

• 한국건축시공학회지
• /
• 제12권3호
• /
• pp.323-331
• /
• 2012

1970년대부터 고온을 받은 콘크리트의 압축강도, 탄성계수, 열응력 등 콘크리트에 영향을 미칠 수 있는 내적, 외적 인자들의 역학적 특성은 조사되어 왔다. 특히, 골재의 열적 특성이나 냉각 방법은 잔존 역학적 특성을 평가하는데 가장 중요하다. 본 연구에서는, 골재 종류와 냉각 방식에 따른 콘크리트의 역학적 특성에 대해 평가했다. 본 연구에서는 열적특성이 다른 일반 골재와 경량골재를 사용했다. 또한, ${\O}100{\times}200mm$ 원주형 공시체를 사용하여 목표 온도, 서냉 및 급냉조건 후에 역학적 특성을 평가하였다. 결과적으로, 보통 골재를 사용한 콘크리트는 경량골재를 사용한 콘크리트보다 냉각조건이 미치는 영향이 큰 것으로 나타났다. 그리고 냉각 속도가 빠르지 않을수록 콘크리트의 잔존 역학적 특성이 크게 나타났다.

• 자원리싸이클링
• /
• 제10권1호
• /
• pp.16-24
• /
• 2001

본 연구는 재생골재를 콘크리트의 구조체로 이용하기 위한 기본적인 공학적 특성을 고찰하는데 목적이 있다. 구조체의 일부로 사용할 경우 내구성과 인성, 특히 강도에 문제가 발생하므로 혼합 물질간의 최적배합비를 산출할 필요성이 있고, 원콘크리트의 물성과 생산방법에 따라 공학적 특성이 다르므로 원콘크리트에 대한 데이터베이스와 생산방법의 차이에 따른 재생골재의 역학특성을 제고할 필요가 있다. 따라서, 본 연구는 콘크리트 구조체의 한 구성원으로 사용된 재생골재의 성분을 물리적 ·화학적 방법을 통해 분석한 후, 총 2계열의 콘크리트 공시체를 제작하여 압축강도를 비롯한 여러 실험값을 산출하여 그 상관관계를 연구하였다. 본 연구결과는 재생골재를 사용한 구조체의 해석, 설계 및 시공에서 기초자료로 활용될 수 있을 것으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.95-98
• /
• 2006

This study investigates spalling properties of high performance concrete, 60MPa clan, made with the various types of coarse aggregate and adding ratio of polypropylene(PP) fiber. As experimental parameters, totally sixteen specimens of ${\phi}100{\times}200mm$ in size are prepared: one specimen for control without fiber, ten specimens with different coarse aggregate types, along with 0.05, 0.1, 0.15 percent of PP fiber in each. 1 hour fire test is conducted and then spalling appearance, spalling degree and residual compressive strength are examined. In addition, sit specimens made with two types of coarse aggregate site, along with same adding ratio of fiber are supplementally done, and only spalling properties is examined. Test results showed that control concrete and most specimens containing 0.05% of PP fiber exhibited 4 to 3 level of spalling degree, resulting severe explosive spalling, except for the specimen using basalt aggregate(Bc) showing 2 to 3 level of that. Especially, the Bc specimen containing 0.1% of the fiber exhibited that residual compressive strength value was 32%, which is 10% higher than other specimens using limestone or granite. Spalling resistance performance was also effective as aggregate size increase.

• 한국농공학회지
• /
• 제37권1호
• /
• pp.73-80
• /
• 1995

This study was carried out to investigate the engineering properties of no-fines con- crete, consisting only of coarse aggregate, cement and water. The used coarse aggregates were two, one is natural coarse aggregate grading 4.75~ lOmm, the other is synthetic lightweight coarse aggregate grading 3~8mm. The results of this study are summarized as follows; 1. The W/C ratio of each type was increased with increase of additional amount of coarse aggregate. 2. The unit weight of used ndtural coarse aggregate was shown 1.762~2.184g/cm$^3$, and synthetic lightweight coarse aggregate was shown 0.756 ~ 1 .348g/cm$^3$. 3. The ahsorption rate of used natural coarse aggregate was shown 8.4 ~ 9.4 %, and synthetic lightweight coarse aggregate was shown 17.0~42.4%. 4. The compressive, tensile and hending strength was decreased with increase of coarse aggregate, respectively. The compressive strength of natural coarse aggregate 1:3 was shown 309kg/cm$^2$. 5. The ultrasonic pulse velocity and dynamic medulus of elasticity of each type was de- creased with increase coarse aggregate, respectively. Also, the decreasing rate of the natural aggregate was larger than that of the synthetic lightweight coarse ag- gregate.

• 한국건설순환자원학회논문집
• /
• 제12권2호
• /
• pp.178-187
• /
• 2024

본 연구에서 순환 굵은 골재를 콘크리트에 적용하는 데 있어 치환율을 고려할 필요가 있다고 판단되어 기존 연구 동향 및 결과에 대한 자료를 수집하고 순환 굵은 골재 치환율에 따른 콘크리트의 역학적 특성을 분석하였다. 순환 굵은 골재에 대한 자료를 수집하는 데 있어 콘크리트 측정항목 중 압축강도의 있는 것과 및 순환 굵은 골재에 부착된 잔여 모르타르의 제거 등의 공정을 거치지 않은 자료를 수집하였다. 순환 굵은 골재를 50 %와 100 % 치환한 콘크리트의 경우 보통 콘크리트 대비 역학적 특성이 평균적으로 각각 -36.0 ~ 9.9 %와 -40.0 ~ 10.4 % 밑돌거나 상회하는 것을 확인할 수 있었다. 이에 따라 배합 시 흡수율을 고려하여 추가적인 물을 혼입해야 하며, 보통 콘크리트 대비 80 % 이상의 역학적 특성이 나오는 순환 굵은 골재 치환율을 50 % 이하로 하여야 한다고 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1231-1238
• /
• 2010

Recently, the utilization of recycled aggregates for backfilling a power transmission pipeline trench has been increasing due to the issues of eco-friendly construction and shortage of natural aggregate resource. It is important to investigate the physical and thermal properties of the recycled aggregates that can be used as a backfill material. This study presents the thermal properties of two types of recycled aggregates with various particle size distributions. The thermal properties of the recycled aggregate were measured using the transient hot wire method and the probe method after performing the standard compaction test using an automatic compactor. Similar to silica sand, the thermal resistivity of the recycled aggregates decreased when the water content increased. This study shows that the recycled aggregate can be a promising backfill material substituting for natural aggregate when backfilling the power transmission pipeline trench.

• 한국해양공학회지
• /
• 제25권1호
• /
• pp.73-79
• /
• 2011

The various properties of concrete have been required, as civil engineering structures are getting larger and complicated. Therefore, the high performance of concrete, such as high strength, high fluidity, and low hydration heat, has been investigated largely. In this study, the properties of lightweight concrete-reducing self-weight of structure member have been studied in order to check the applicability of lightweight aggregate concrete to structural material. The experiments on compressive strength, splitting tensile strength, unit weight, and modulus of elasticity have been conducted with varying PLC, LWCI, LWCII, LWCII-SF5, LWCII-SF15 to check the basic properties. The compressive strength of 21MPa was obtained easily by using lightweight aggregate concrete and the addition of silica fume to increase the compressive strength slightly. To use lightweight aggregate concrete for civil engineering structures, systematic and rigorous studies are necessary.

• Computers and Concrete
• /
• 제10권2호
• /
• pp.95-104
• /
• 2012

This study uses recycled green building materials based on a Taiwan-made recycled mineral admixture (including fly ash, slag, glass sand and rubber powder) as replacements for fine aggregates in concrete and tests the properties of the resulting mixtures. Fine aggregate contents of 5% and 10% were replaced by waste LCD glass sand and waste tire rubber powder, respectively. According to ACI concrete-mixture design, the above materials were mixed into lightweight aggregate concrete at a constant water-to-binder ratio (W/B = 0.4). Hardening (mechanical), non-destructive and durability tests were then performed at curing ages of 7, 28, 56 and 91 days and the engineering properties were studied. The results of these experiments showed that, although they vary with the type of recycling green building material added, the slumps of these admixtures meet design requirements. Lightweight aggregate yields better hardened properties than normal-weight concrete, indicating that green building materials can be successfully applied in lightweight aggregate concrete, enabling an increase in the use of green building materials, the improved utilization of waste resources, and environmental protection. In addition to representing an important part of a "sustainable cycle of development", green building materials represent a beneficial reutilization of waste resources.

• 콘크리트학회논문집
• /
• 제23권4호
• /
• pp.431-440
• /
• 2011

콘크리트 구조물은 화재에 노출시 고온에 의해 내부 구조가 변화하며 보유하고 있는 강도와 변형 성능이 저하되어 최종적으로 수명이 단축하게 된다. 그 성능 저하 수준은 도달된 온도, 고온에 노출된 시간, 콘크리트의 배합, 골재의 특성 및 콘크리트 자체의 특성 등에 의해 결정된다. 이 연구는 물시멘트비, 잔골재율 및 굵은 골재의 최대 크기등의 변수에 대한 초고강도 콘크리트의 열적 거동을 평가하기 위해 실시되었다. 상온 및 $500^{\circ}C$의 온도에 대하여 초음파 속도, 동탄성 계수, 정탄성 계수 및 압축강도 시험은 ${\varnothing}100{\times}200\;mm$ 원주형 콘크리트 시험체를 사용하여 실시되었다. 결과로서 $500^{\circ}C$의 온도에서 가열된 초고강도 콘크리트의 잔존 역학적 특성은 물결합재비, 잔골재율 및 굵은 골재 최대 치수의 변화에 영향을 받는 것으로 나타났다.