• Journal of the Korea Furniture Society
• /
• v.15 no.2
• /
• pp.53-62
• /
• 2004

This study explored the development of wood furniture made of aged Castanea crenata Sieb. et Zucc, which has been largely planted in the southern area since 1960s and has hardly been used as furniture materials. First, the physical properties of the chestnut wood including specific gravity, stiffness, and shrinkage were compared with Zelkova serrata, Acer palmatum Thunb., Fagus crenata var. multinevis, Quercus, Tagayasan, Prunus serrulata var. spontanea, Juglans sinenis, Pteronrpus santalinus, Diospyros ebenum, and Fraxinus rhynchophylla, which have largely been used in manufacturing furniture. The chestnut wood had appropliate physical properties for wood furniture like other furniture woods. A piece of small table 50 cm in width, 50 cm in length and 60 cm in height by the chestnut tree was created for a current interior space. Since the diameter of the chestnut tree planted since 1960s is below around 30 cm, the top plate of the table had to be put together by an end-joint technique using a small strip. Finally, it is expected that this study will create a greate motivation for furniture designers, furniture studios and furniture companies in Korea to use the woods from the aged chestnut tree in developing furniture in the future.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.711-714
• /
• 2005

This paper focused on development of geopolymer for wood wool ceramic board. Geopolymer can substitude ordinary portland cement and its accelerator of wood wool cement board as inorganic polymer. In this study, what we would obtain geopolymer's properties such as initial setting time(KS L 5108), flow(KS L 5102) and compressive strength of 3days aged(KS L 5105), was less than 1 hour, more than $110\%$, more than 40Mpa. Geopolymer have three essential materials called filler, hardener and geopolymer liquor. So, We applied filler by quartz, hardener by blast furnace slag powder, metakaoline and fly ash, geopolymer liquor by NaOH, KOH and sodium silicate solution. As result of this experiment, what we could obtain best fitted geopolymer's properties such as initial setting time, flow and compressive strength of 3days aged, was 45min, $116\%$ and 43.6Mpa. This result can be applicable to commercial wood wool ceramic board.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.359-364
• /
• 2011

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.10a
• /
• pp.34-39
• /
• 2008

• Journal of the Korea Furniture Society
• /
• v.21 no.5
• /
• pp.403-412
• /
• 2010

Puzzles of various types were made of wood. Children aged 3 to 5 were play directly into a wooden puzzle, then, mainly in adults, the survey was conducted. Comparisons of affinity for the children, teachers, parents, survey were compared with the rating. As a result, the preferred material of the puzzle was in the timber. The type of puzzle children, teachers and parents preferred picture puzzle. For colors, teachers and parents of the puzzle as unpainted wood was preferred. In addition, the favorite play was the difference in difficulty and number puzzles. Therefore, the preference for children and adults aware of the puzzle with a big difference has been clearly identified.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.1-10
• /
• 2011

In this study, 13 water soluble polymers(6 natural polymer, 7 synthetic polymer) were treated on Hanji. Mechanical properties, morphology and oxidation index with thermal aging were measured on the aged Hanji, dewaxed Hanji and polymer treated Hanji. 3 natural polymer(such as CMC, EC, MC) and 3 synthetic polymers(such as PVA 1500, 2000, PEG 1500) treated Hanji had higher strength than other polymer treated Hanji. The oxidation index of 3% methyl cellulose solution treated Hanji did a little increase with thermal aging. Finally, methyl cellulose was found to be the most efficient method for strengthening the dewaxed Hanji. The best aging safety and thermal stability were obtained at the methyl cellulose 3% water solution.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2012

In this study, 5 solvent soluble polymers were treated on Hanji. Mechanical properties, morphology and oxidation index with thermal aging were measured on the aged Hanji, dewaxed Hanji and polymer treated Hanji. Synthetic polymers(such as polylactic acid, polybutylene succinate, polystyrene) treated Hanji had higher strength and thermal stability than cellulose derivatives(such as cellulose nitrate and cellulose acetate) treated Hanji. Polymer treated Hanji showed a little bit of color change. The oxidation index of PS treated Hanji did not increase with thermal aging because it did not have a carboxyl group in chemical structure. Finally, polystyrene was found to be the most efficient method for strengthening the dewaxed Hanji. The best aging safety and thermal stability were obtained at the polystyrene 3% solution.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.57-64
• /
• 2012

When papers each made with sea-algae pulp 1%, 5% and soft, hard wood pulp were aged for 12days. Paper made with soft wood pulp is 30% loss of folding endurance, made with hard wood pulp is 50% loss of folding endurance. On the other, papers each made with 9% sea-algae pulp and soft, hard wood pulp were 18% loss of folding endurance. In the aging test of paper made with different freeness paper made with 300ml CSF, is more effective than 400ml CSF, 500ml CSF.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.625-628
• /
• 2006

It is known that cement production not only consumes large amount of energy but also contributes substantially to the green house gas emission. Therefore, there is a demand to develope a new technology to produce energy efficient and environmental conscious cements. The most recent, wood wool ceramic board is being applied in various building material field, for example thermal insulating and acoustic absorption material. This paper focused on improvement of alumino-silicate binder's physical properties for wood wool ceramic board. As the result of this experiment, what we could obtain best fitted alumino-silicate binder's properties such as initial setting time, flow and compressive strength of 3 days aged, was 58min, 110% and 66.0Mpa. This result can be applicable to commercial wood wool ceramic board.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.24-30
• /
• 2019

The deck floor of a the cargo truck becomesis damaged and aged due to the continuous loading of the loading cargo and external environmental factors. Floor boards made of wood and metal are often used. In the case of wood, the cost is high due to the use of imported wood, and the strength is easily deterioratesd due to environmental factors. In the case of metal materials, the durability is higher than that of wood, but problems are raised due to the effect of major factors that hinder the weight reduction, and the effects of corrosion. In order to replace this stucturestructural design, this study proposed a wood fiber composite using natural raw materials. Woody composites are being used as environmentally and friendly exterior materials with the combined advantages of plastic, and wood,; low cost and low density. However, due to the nature of the woody composites, the properties are differentdiffer depending on the contents of the matrix, reinforcing agent, additives, compatibilizer, etc. In this study, we investigate these problems through analysis of the microstructure and mechanical properties according to proper content and injection molding conditions. As a result, it is considered that the wood deck composite can replaced the current Deck Floor Boardreplace current deck floor boards through continuous continued research and results of this study.