• 대한치과기공학회지
• /
• 제45권3호
• /
• pp.55-60
• /
• 2023

Purpose: This study aimed to evaluate the effects of a special heat treatment on Pd-Au-Ag metal-ceramic alloy after degassing treatment and on changes in the hardness of the alloy during the firing process. Methods: Specimen alloys were cast and subjected to degassing at 900℃ for 10 minutes. These specimens were then subjected to a special heat treatment at 600℃ for 15 minutes in a dental porcelain furnace. Further, the specimens were subjected to simulated firing in the porcelain furnace. The resulting specimens were then tested for hardness, and changes in the microstructure were observed. Results: There was a decrease in the hardness of the alloy during the simulated firing of the cast alloy due to the coarsening of the particles. Meanwhile, additional heat treatment after degassing was found to play a crucial role in preventing a decrease in hardness. This treatment effectively suppressed the coarsening of the precipitates during repeated firing at high temperatures. Conclusion: Specific heat treatment of the Pd-Au-Ag metal-ceramic alloy prevented a decrease in its hardness and extended the lifespan of the metal-ceramic prosthesis.

• 한국축산식품학회지
• /
• 제35권4호
• /
• pp.441-448
• /
• 2015

Blanching beef for use in home meal replacements (HMR) is an important process that determines the final quality of the beef after the cooking process. Thermal pretreatment also minimizes the change in quality during the main cooking process or storage. In this study, beef samples were washed and sliced, then treated by immersion in boiling water (1-10 min), steaming (1-10 min), or pan-frying in oil (30-240 s). The color after each thermal treatment showed higher L* and b* values and lower a* values compared with the raw beef, except for the pan-frying thermal treatment. The total color difference (∆E) and pH value were significantly increased by panfrying (p<0.05). There was no significant difference in the shear force of the beef samples, except for the sample pan-fried for 210 s. The nutritional content of beef was measured as the moisture, protein, fat, and ash contents, which were 69.96, 16.64, 3.49, and 1.13%, respectively, in raw beef. After thermal treatment, the crude protein and fat contents were increased, whereas the moisture and ash contents decreased. The mineral content, including Na, Mg, Fe, and Ca was highest after pan-frying. The heat treatment decreased microorganisms in all the samples. The total bacteria count in raw beef was 4.5-4.7 Log CFU/g, whereas the bacteria count decreased to 2.2-2.8 Log CFU/g after blanching. Thermophilic bacteria, coliform, mold, and yeast not detected in any thermally treated sample.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.300-305
• /
• 2010

Poly(ethylene terephthalate)(PET) tire cord has relatively lower adhesion properties caused by limited reacting sites. In order to improve the adhesion force between PET tire cord and rubber, an additional process to activate surface of PET has been employed. Atmospheric plasma was used to substitute the chemical finishing process of PET tire cord as a green dipping process. Contact angle was measured to confirm surface change of PET after plasma treatment. The treated PET tire cords with/without resorcinol-formaldehyde-latex(RFL) and unvulcanized rubber were vulcanized in a testing mold at $160^{\circ}C$. After atmospheric plasma treatment of PET tire cord, adhesion force was somewhat increased under some conditions.

• 상하수도학회지
• /
• 제21권1호
• /
• pp.13-25
• /
• 2007

The water treatment plants in Seoul Metropolitan Area, which are under Korea Water Resources Corporation(KOWACO)'s management, take water from Paldang Reservoir in Han River System for drinking water supply. There are taste and odor (T&O) problems in the finished water because the conventional treatment processes do not effectively remove the T&O compounds. As part of countermeasures for taste and odor control, KOWACO is planning to introduce advanced water treatment process such as ozone and GAC in near future. This study evaluated the removal characteristics of T&O and dissolved organic matter (DOM) to find design and operation parameters of advanced water treatment processes in a pilot-scale treatment plant. The GAC adsorption capacity for DOC in the two GAC system (GAC and $O_3$-GAC) at an EBCT of 14min was mostly exhausted after 9months. The differency of the removal efficiency of DOC between $O_3$-GAC and GAC increased with increasing operation time because the bioactivity in $O_3$-GAC process was enhanced by post-ozone process. Removal by conventional treatment was unable to reach the target TON(threshold odor number) of 3 but GAC systems at an EBCT(empty bed contact time) of 14 min were able to archive the target with few exception. During the high T&O episodes, PAC as a pretreatment together with GAC could be useful option for T&O control. However, substantial TON removal continued for more than two year (> 90,000 bed volumes). At the spiking of less concentration 26 to 61 ng/L in the influent of GAC systems, GAC absorber and $O_3$-GAC processes could meet the treatment target. The better spike control after 12 and 19 months of operation compared to that after 7 months of operation is a strong indication of biological control. The results presented in this study had shown that $O_3$-GAC process was found to be more effective for T&O control than GAC process. And the main removal mechanism in GAC systems were adsorption capacity and biodegradation.

• 열처리공학회지
• /
• 제31권5호
• /
• pp.220-230
• /
• 2018

The objective of this study is to investigate the effect of solution treatment on the microstructure and corrosion behavior of cast AZ91-4%RE magnesium alloy. In the as-cast state, microstructure of the AZ91-4%RE alloy was characterized by intermetallic ${\beta}(Mg_{17}Al_{12})$, $Al_{11}RE_3$ and $Al_2RE$ phase particles distributed in ${\alpha}-(Mg)$ matrix. After solution treatment, the ${\beta}$ particles with low melting point dissolved into the matrix, but Al-RE phases still remained due to their high thermal stabilities. It was found from the immersion and potentiodynamic polarization tests that corrosion rate of the AZ91-4%RE alloy increased after the solution treatment. On the contrary, EIS tests and EDS compositional analyses on the surface corrosion products indicated that the stability of the corrosion product was improved after the solution treatment. Examinations on the corroded microstructures for the ascast and solution-treated samples revealed that dissolution of the ${\beta}$ particles which play a beneficial role in suppressing corrosion propagation, would be responsible for the deterioration of corrosion resistance after the solution treatment. This result implies that the microstructural features such as amount, size and distribution of secondary phases that determine corrosion mechanism, are more influential on the corrosion rate in comparison with the stability of surface corrosion product.

• 한국분말재료학회지
• /
• 제21권2호
• /
• pp.142-146
• /
• 2014

Fundamental experiences have been studied for development of pre-treatment process of Sn by-products such as solders. Dry and wet separation/recovery processes were considered by the differences of physical properties. The by-products, which are analyzed by solder metal and oxides. The metal and oxide were simply separated by dry ball-milling process for 12 hours, after that recovery metal powder might be reusable as lead or lead-free solders. In terms of wet separation process, samples were dissolved in $HNO_3+H_2O_2$ and the precipitation were analyzed by $SnO_2$. Overall efficiency of recovery might be increasing via developing simple pre-treatment process.

• 한국재료학회지
• /
• 제28권3호
• /
• pp.174-181
• /
• 2018

Three kinds of STS304-Zr alloys were fabricated by varying the Zr content, and their microstructure and fracture properties were analyzed. Moreover, we performed heat treatment to improve their properties and studied their microstructure and fracture properties. The microstructure of the STS304-Zr alloys before and after the heat treatment process consisted of ${\alpha}-Fe$ and intermetallics: Zr(Cr, Ni, Fe)2 and Zr6Fe23. The volume fraction of the intermetallics increased with an increasing Zr content. The 11Zr specimen exhibited the lowest hardness and fine dimples and cleavage facets in a fractured surface. The 15Zr specimen had high hardness and fine cleavage facets. The 19Zr specimen had the highest hardness and large cleavage facets. After the heat treatment process, the intermetallics were spheroidized and their volume fraction increased. In addition, the specimens after the heat treatment process, the Laves phase (Zr(Cr, Ni, Fe) 2) decreased, the Zr6Fe23 phase increased and the Ni concentration in the intermetallics decreased. The hardness of all the specimens after the heat treatment process decreased because of the dislocations and residual stresses in ${\alpha}-Fe$, and the fine lamellar shaped eutectic microstructures changed into large ${\alpha}-Fe$ and spheroidized intermetallics. The cleavage facet size increased because of the decomposition of the fine lamellar-shaped eutectic microstructures and the increase in spheroidized intermetallics.

• 한방재활의학과학회지
• /
• 제28권1호
• /
• pp.109-120
• /
• 2018

Objectives This is one of the manuals of East-west integrative medicine which was created by the Committee on integrative medicine of Chung-Yeon Korean Medicine Hospital. The purpose of this manual is to support clinical decision making and communication during the rehabilitation of patients after shoulder surgery. Methods The drafting was done by two rehabilitation specialists in Korean medicine. After a rehabilitation specialist in western medicine reviewed the draft and exchanged their ideas, a revised version that reflects the goal of consultation was made. Then the Committee agreed to adopt the manuals through the process of review and feedback in addition to face-to-face discussions. Results This manual describes clinical decision making for rehabilitation after arthroscopic rotator cuff repair, SLAP repair, and arthrolysis. Therefore it contains the schedule of rehabilitation treatment through the surgical technique, general goal of the rehabilitation by phase, guide for patients and postoperative infection management. Conclusions The proposal of this manual has a significance for it provides information about decision making process and contents of treatment in one medical institution for East-west integrative rehabilitation treatment after shoulder surgery.

• 한방재활의학과학회지
• /
• 제28권4호
• /
• pp.59-69
• /
• 2018

Objectives This is one of the manuals of East-west integrative medicine which was created by the Committee on integrative medicine of Chung-Yeon Korean Medicine Hospital. The purpose of this manual is to support clinical decision making and communication during the rehabilitation of patients after lumbar spine surgery. Methods The drafting was done by two rehabilitation specialists in Korean Medicine. After a rehabilitation specialist in western medicine reviewed the draft and exchanged their ideas, a revised version that reflects the goal of consultation was made. Then the Committee agreed to adopt the manuals through the process of review and feedback in addition to face-to-face discussions. Results This manual describes clinical decision making for rehabilitation after lumbar microdiskectomy, interbody fusion, and kyphoplasty. Therefore it contains the schedule of rehabilitation treatment through the surgical technique, general goal of the rehabilitation by phase, scales for outcome measure and postoperative infection management. Conclusions The proposal of this manual has a significance for it provides information about decision making process and contents of treatment in one medical institution for East-west integrative rehabilitation treatment after lumbar spine surgery.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권8호
• /
• pp.1048-1054
• /
• 2011

레이저 표면경화처리는 고밀도 에너지 열원에 의해 레이저 조사부위만 급속 가열한 후 표면의 열이 내부로 전도되어 급속히 자기냉각 됨으로써 표면을 경화시키는 방법이다. 이 표면처리 방법은 열처리에 의한 열변형이 거의 없고, 표면경화처리 이후 다른 공정을 수반하지 않는다. 또한 국부적인 가공이 가능하기 때문에 복잡한 형상을 가지는 금형에는 적합한 표면처리 방법이다. 본 연구에서는 열처리에 적합한 빔 프로파일을 가진 고출력 다이오드 레이저를 이용하여 금형재료용 주철의 표면처리를 실시하였다. 프레스 금형 공정에 따른 금형의 형상이 다르기 때문에 적용부위에 따라 시험편을 평면과 모서리부로 나누어 열처리를 실시하였다. 이때 모서리부의 열처리는 광학헤드를 $10^{\circ}$ 기울인 상태에서 진행하였다. 그 결과, 모서리부의 열처리는 평면부와 비교하여 형상에 따른 열전달 루트가 제한되므로, 입열이 집중되기 쉬워 평면 열처리보다 빠른 이송속도에서 경화가 이루어졌다.