• Elastomers and Composites
• /
• v.40 no.3
• /
• pp.181-187
• /
• 2005

Changes of physical properties or NR vulcanizates with different cure systems by thermal aging were investigated. Two sulfur cure systems and one resole cure system were employed, and total contents of the curatives were varied. For the NR vulcanizates with sulfur cure systems, hardness and modulus after the thermal aging at $90^{\circ}C$ for 3 days were increased, but elongation at break and tensile strength were decreased. For the NR vulcanizates with resloe cure system, the physical properties after the thermal aging were decreased. The change of physical properties by the thermal aging was explained with the crosslink density change. The crosslink densities or the NR vulcanizates with sulfur cure systems were increased after the thermal aging, but those with resole cure system were decreased. Influence of the migration of antidegradant on the changes of physical properties was also investigated. However, the changes of physical properties by the thermal aging were not explained sufficiently with the migration of antigradant.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.215-222
• /
• 1993

Malononitrile(MN) as a reactive additive was added to Diglycidyl ether of bisphenol A (DGEBA)/Methylene dianiline (MDA) system in order to modify a thermosetting epoxy resin. Cure ki. netics and cure mechanism of this modified system were investigated by using DSC(differential scanning calorimetry) and FT-IR(fourier transform infrared spectrometry). Cure kinetics gave an information that the DGEBA/MDA system modified with MN should cure at over $110^{\circ}C$ after curing at about $80^{\circ}C$ for the complete curing. The activation energy of the first cure was nearly constant and that of the second cure was increased as the MN content was increased. Cure mechanism for the system was investigated with the samples cured every $30^{\circ}C$, from $80^{\circ}C$ to $170^{\circ}C$, for Ihr. It was known that the cure reactions of the epoxy-diamine system were composed of PA -E, SA - E and E-OH reactions. Beside these three reactions, in the DGEBA/MDA/MN system PA-CN and CN-OH reaction was found.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.628-634
• /
• 2000

Crosslink is the most important chemistry in a rubber vulcanizate. Degree and type of crosslinks of the vulcanizate determine its physical properties. Change of crosslink density and deformation of a rubber vulcanizate by thermal aging were studied using natural rubber (NR) vulcanizates with various cure systems (conventional, semi-EV, and EV) and different cure times (under-, optimum-, and overture). All the NR vulcanizates were deformed by the thermal aging at 60-100 $^{\circ}C.$ The higher the aging temperature is, the more degree of the deformation is. The undercured NR vulcanizates after the thermal aging were deformed more than the optimumand overcured ones. The NR vulcanizates with the EV cure system were less deformed than those with the conventional and semi-EV cure systems. The deformation of the NR vulcanizates was found to be due to change of the crosslink density of the vulcanizates. The crosslink densities of all the vulcanizates after the extraction of organic materials were also changed by the thermal ging. The sources to change the crosslink densities of the vulcanizates by the thermal aging were found to be dissociation of the existing sulfur crosslink and the formation of new crosslinks by free sulfur, reaction products of curing agents, and pendent sulfide groups.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.728-736
• /
• 2002

The thermal and dielectric properties of unsaturated polyester resin system during cure were analyzed under Isothermal conditions. Both $varepsilon$′ and $varepsilon$" decreased and dipole relaxation was observed under isothermal conditions during cure. The ionic conductivity decreased linearly with the conversion according to the Kienle-Rate equation (ln($varepsilon$"$_{ionic}$we$_{0}$)=C$_{r}$$alpha$+C$_{0}$) up to $alpha$=0.15, after which it aparted from the relationship due to the entanglement of polymer chains. The effect of ionic conductivity was revealed to be larger than that of dipole motion during the whole cure through the electrical modulus analysis. Although dielectric motion was analyzed with Debye model, it was observed only at a narrow time region of middle stage of cure. In order to estimate the dielectric properties during the whole cure, the Havriliak-Negami model was considered and modified with the strong effect of ionic conductivity. The changes of $varepsilon$′ and $varepsilon$" were well estimated with this modified Havriliak-Negami model.

• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.246-255
• /
• 2023

In this study, we investigated for natural rubber foam to replace petrochemical-based neoprene foam. Experiments were conducted on vulcanization system and 2-step foaming process of natural rubber. The vulcanization system were EV(Efficient Vulcanization Cure), Semi-EV(Semi-Efficient Vulcanization Cure) and CV(Conventional Vulcanization Cure). In the 2-step foaming process, first molding temperature was 140℃, times were 15, 20, 25, and 30minutes, and the second molding temperature was 160℃, the times 5, 10, 15, and 20minutes. The cure and viscosity characterization were evaluated by oscillating disc rheometer (ODR) and mooney viscosmeter. Various mechanical characteristics, including hardness, tensile strength, elongation at the point of rupture, and tear strength, were quantified. Subsequently, an assessment of alterations in these mechanical attributes was conducted post-immersion in a NaCl solution. In addition degree of volume change was measured after immersing the NR foam in NaCl solution and the low-temperature permanent compression set was evaluated at 4℃. And expansion ratio and shrinkage ratio of NR foam were evaluated for 28 days. As a result the EV vulcanization system showed the least change in physical properties before and after salt water immersion, and the lowest shrinkage ratio for 28 days. In addition it was confirmed that the 2-step foaming optimum condition differed depending on the appropriate vulcanization condition.

• Elastomers and Composites
• /
• v.26 no.2
• /
• pp.115-122
• /
• 1991

Polychloroprene rubber was moisture-cured after treating them with silane coupling agents such as 3-mercaptopropyltrimethoxysilane(MPS), 3-methacryloxypropyltrimethoxysilane(MAS) and vinyltriethoxysilane(VES), especially MPS. The cure reaction is composed of two steps. The first is the reaction between chlorine atoms of CR and silane coupling agents. The second is the formation of cross-links which are siloxane linkage. The linkage is formed by the condensation of silanol groups which are produced by the hydrolysis of alkoxysilyl groups. The first reaction was kinetically studied and the reactivity of CR to silane coupling agents was determined in previous literature. Crosslinking density and mechanical properties of the moisture-cured elastomer filled with silica or non-filled were studied and the feasibility of this cure system was discussed.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.6
• /
• pp.1261-1266
• /
• 2009

The wrinkle is a typical sign showing aging. These days lots of people want to have a young and healthy appearance and many medical doctors are studying about wrinkle cure. In fact a young face without wrinkle looks more healthy and energetic. Therefore the wrinkle cure is important at the point of medical view. This research is an investigation of several studies about wrinkle cure using acupuncture needle. We have to consider the problem of the whole body which is related 12 meridians and meridian muscles as well as topical skin and tissues. There are three parts affecting wrinkle formation and cure. The first is a meridian and meridian muscle, the second is a local muscle and fascia on the head and neck, the third is a local skin structure. There are three kinds of method to cure the wrinkle locally. The first one is the perpendicular treatment of acupuncture, called the microneedle therapy, the process of this method is that lots of microneedles stab in the skin to dermis. The second one is the transverse treatment of acupuncture. The process of this method is that an acupuncture needle inserts just under the wrinkle skin. The third one is the incision treatment of acupuncture, called subcision, the process of this method is to cut the fibrous band which connect from the facial muscle to SMS(superficial musculoaponeurotic system) using cuttable needle. The hematoma after treatment let a collagen increase.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.11 no.2
• /
• pp.83-95
• /
• 2005

The purpose of this study is to analyze, durability of motor effort after finishing rehabilitation program and the influence from the isotonic lumbar region extension exercise after an operation according to the different operation way in invasive degrees. We selected randomly 80 patients who have no complication and musculoskeletal system diseases with finishing the 12 weeks' rehabilitation program after getting laser discectomy, but fail to conservative treatment, about Lumbar HNP, and divided into minimal invasive groups 38 and invasive groups 42 for study. As the results, in minimal invasive group, after finishing cure and 6 months later, the degree of hold muscle of women is much better than that of men. but in Invasive group, that of men is better than that of women, in case of women, the $0^{\circ}$ and $72^{\circ}$ in lumbar flexion angle have weaken or no improvement than before beginning exercise. and muscle force in $72^{\circ}$ in lumbar flexion angle increased to all men and women than before beginning exercise in Minimal invasive group. but in invasive group. it decreased. When analyze the lapsed time in Minimal invasive group, the groups who start the exercise within 3 months are better than the groups who start the exercise above 3 months after an operation the hold muscle degree all angles after finishing cure and 6 months later. Meanwhile, in invasive group, the groups who start the exercise within 3 months are better than the groups who start the exercise above 3 months after an operation about the hold muscle degree in 36-72 of lumbar flexion angle but 0-36 are not good after finishing cure and 6 months later. When analyze BMI in Minimal invasive group, the normal groups are better than the overweight groups about hold muscle degree in all angles after finishing cure and 6 months later.

• Macromolecular Research
• /
• v.12 no.3
• /
• pp.282-289
• /
• 2004

We have extensively characterized the fluorescence behavior of unsaturated polyester (UP) resin in the absence and presence of a 1,3-bis-(l-pyrenyl)propane (BPP) fluorescent probe at various dynamic and isothermal cure histories by means of a steady-state fluorescence technique using a front-face illumination equipment. In addition, we explored the effect of the fluorescence intensity on the relaxation of the fluorescent probe in the UP resin by resting the dynamically and isothermally cured resin at ambient temperature and pressure for 24 h. The monomer fluorescence intensity, which has two characteristic peaks at 376 and 396nm, changed noticeably depending on the cure temperature and time and provided important information with respect to the molecular and photophysical responses upon curing. The result of the fluorescence study indicates that the increased local viscosity and restricted molecular mobility of the UP resin surrounding the BPP probe after curing are both responsible for the enhancement of the monomer fluorescence intensity. Our results also demonstrate that once the BPP probe has enough time to rearrange and become isolated prior to fluorescence, a sufficient amount of fluorescence is emitted. Therefore, we note that the fluorescence behavior of this UP resin system is influenced strongly by the relaxation process of the fluorescent probe in the resin as well as process used to cure the resin.

• The Journal of Korean Academy of Prosthodontics
• /
• v.23 no.1
• /
• pp.155-164
• /
• 1985

Acrylic resin has some disadvantages in its physical properties such as a low surface hardness, being easily abraded as well as low degree of impact resistance. To overcome these disavantages, Perma Cure System was introduced in 1981, in which photo polymerizing monomers coated on acrylic resin surface were polymerized. In this study, to observe the effect of Perma Cure System on physical properties of treated surface of different types of acrylic resin, abrasion resistance, surface hardness and surface roughness of 4 different types of resin (Premium, Ortho-jet acrylic, Quick resin, Thermo jel) were tested before and after coating treatment. The conclusions arised from this study are as follows; 1. In all types of resin, the abrasion resistance of coated specimen was higher than that of uncoated specimen, and there was difference in amount of abrasion among the types of coated resin. 2. In all types of resin, the surface hardness of coated specimen was higher than that of uncoated specimen, and there was no difference in surface hardness among the types of coated resin. 3. In all types of resin, surface roughness of coated specimen was lower than that of uncoated specimen, and was different according to the degree of surface roughness before coating treatment in same sort of resin specimen.