• 한국식품과학회지
• /
• 제18권3호
• /
• pp.221-225
• /
• 1986

소시지 배합시에 부산물의 사웅가능성을 Linear Programming에 의해 조사하였다. 원료육 중류만을 고려하여 8가지의 제한조건 조합((1)수분 및 고기함량, (1)+염통, (1)+내장육, (1)+머리고기, (1)+염통+등지방, (1)+염통, 十 내 장육,(1)+ 염통 + 머리고기 . (1) + 염통+머리고기+등지방)에 의해 최소가격 배합을 시도하여 본 결과. 현실적으로 가장 경제적인 배합은 수분 및 고기함량과 염통 및 내장육 사용을 고려한 것으로 나타났다. 등지방의 사용을 고려하였을 경우가 가장 비싼 배합비를 초래하였다. 그러나 이러한 결과는 국내 규정에 제한이 없는 식물성 단백질 등 결착제 및 증량제를 첨가할 경우에 달라질 수 있다.

• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.141-148
• /
• 2011

This paper presents the quantitative analysis results of research on the burnup effect on the nuclear fuel cycle cost of BeO-$UO_2$ fuel. As a result of this analysis, if the burnup is 60 MWD/kg, which is the limit under South Korean regulations, the nuclear fuel cycle cost is 4.47 mills/kWh at 4.8wt% of Be content for the BeO-$UO_2$ fuel. It is, however, reduced to 3.70 mills/kWh at 5.4wt% of Be content if the burnup is 75MWD/kg. Therefore, it seems very advantageous, in terms of the economic aspect, to develop BeO-$UO_2$ fuel, which does not have any technical problem with its safety and is a high burnup & long life cycle nuclear fuel.

• Current Photovoltaic Research
• /
• 제7권4호
• /
• pp.103-110
• /
• 2019

Cu(In,Ga)₃Se₅ (β-CIGS) has a band gap of 1.35 eV, which is an optimum value for high solar-energy conversion efficiency. The effects of Cu and Ga content on the cell performance were investigated previously. However, the effect of Se content on the cell performance is not well understood yet. In this work, β-CIGS films were fabricated by three-stage co-evaporation of elemental sources with various Se fluxes at the third stage instead of at all stages. The average composition of five samples was Cu_1.05(In_0.59,Ga_0.41)3Se_y, where the stoichiometric y value is 5.03 and the stoichiometric Se/metal (Se/M) ratio is 1.24. We varied the Se/metal ratio in a range from 1.18 to 1.28. We found that the best efficiency was achieved when the Se/M ratio was 1.24, which is exactly the stoichiometric value where the CIGS grains on the CIGS surface were tightly connected and faceted. With the optimum Se/M ratio, we were able to enhance the cell efficiency of a β-CIGS solar cell from 9.6% to 12.0% by employing a Na₂S post deposition treatment. Our results indicate that Na₂S post deposition treatment is very effective to enhance the cell efficiency to a level on par with that in α-CIGS cell.

• 마이크로전자및패키징학회지
• /
• 제10권4호
• /
• pp.73-79
• /
• 2003

Sn-Ag 전해도금시 도금욕의 Ag 이온의 농도, 전류밀도, 펄스 주기, 첨가제등의 인자들이 솔더의 조성과 표면형상에 미치는 영향에 관하여 연구하였다. Ag 이온의 농도와 시편에 가해지는 전류밀도를 변화시킴으로써 Sn-Ag 솔더내의 Ag 조성을 조절하는 것이 가능하였고 또한 전류밀도를 증가시키면 솔더의 미세조직의 크기가 감소되는것을 관찰하였다. 펄스 인가 주기와 첨가제의 양등을 변화시키면 솔더내 Ag의 조성이 달라지고 솔더의 표면 거칠기가 감소하면서 표면 형상이 변화됨을 확인하였다. 이러한 과정을 통하여 30 $\mu\textrm{m}$의 미세피치와 15$\mu\textrm{m}$의 범프 높이를 가지는 공정 Sn-Ag 솔더 범프를 형성하였다. 도금된 솔더의 조성은 EDS와 WDS 분석을 통하여 확인하였고 표면형상은 SEM과 3D surface analyzer를 사용하여 분석하였다.

• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.121-129
• /
• 2005

Basic design concept of the future steel structure requires environmental compatibility and maintenance free capability to minimize economic burdens. Recent trends in alloy design for advanced weathering steel include addition of various alloying elements which can enhance formation of stable and protective rust layer even in polluted urban and/or high $Cl^{-}$ environment. The effects of Ca, Ni, W, and Mo addition on the corrosion property of Ca-modified weathering steel were evaluated through a series of electrochemical tests (pH measurement and electrochemical impedance spectroscopy: EIS) and structural analysis on rust layer formed on the steel surface. Ca-containing inclusions of Ca-Al-Mn-O-S compound are formed if the amount of Ca addition is over 25 ppm. Steels with higher Ca content results in higher pH value for condensed water film formed on the steel surface, however, addition of Ni, W, and Mo does not affect pH value of the thin water film. The steels containing a high amount of Ca, Ni, W and Mo showed a dense and compact rust layer with enhanced amount of ${\alpha}-FeOOH$. Addition of Ni, W and Mo in Ca-modified weathering steel shows anion-selectivity and contributes to lower the permeability of $Cl^{-}$ ions. Effect of each alloying element on the formation of protective rust layer will be discussed in detail with respect to corrosion resistance.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.884-890
• /
• 2002

An inorganic-organic hybrid system, silica-poly(ethylene glycol) songel is reported. This system was prepared via sol-gel method by varying varous processing variables. e.g. ultrasonic radiation time, gelling temperanture, PEG content and its molecular weight. Various experimental techniques wee employed to analyze the morphological, mechanical and optical properties of the system. The results were discussed in the light of existing theories. The sonogel system exhibited the common features of inorganic-organic hybrids. $SiO_2-10$ wt% PEG sonogel exhibited the morphological and optical properties superior to those reported earlier for the classic gels and found suitable for device applications.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.412-417
• /
• 2011

Formation and characterization of hydroxyapatite-based porous ceramics derived from polymer pyroysis were investigated. Polymer based process is chosen for preparing porous hydroxyapatite-based ceramics having a high mechanical strength. The hydroxyapatite-based porous ceramic was prepared by a self-blowing process of a polymethylsiloxane with filler and pyrolyzed at above $1000^{\circ}C$. Biphasic material consisted of hydroxyapatite and CaO has been prepared by solid state reaction from calcium hydroxide($Ca(OH)_2$) and calcium hydrogen phosphate dihydrate($CaHPO_4{\cdot}2H_2O$) as a filler material. The influence of filler content on mechanical properties was evaluated. The change of crystalline phase, microstructure and mechanical properties were investigated and discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.184-185
• /
• 2007

We investigated the growth behaviors of ZnO epilayers on sapphire substrates fabricated sing RF magnetron puttering and RTA. The effects of deposition temperature and oxygen partial pressure in plasma on the structural and electrical properties were measured by XRD, AFM, SEM, and Hall effect measurement. It was found that ZnO thin films became denser and smoother with increasing deposition temperature and $O_2$ content in the puttering gas. ZnO thin film of oxygen and argon with a ratio of 5:5 had an electron concentration of $8.048{\times}10^{18}cm^{-3}$, resistivity of $0.0141{\Omega}{\cdot}Cm$, and mobility of $55.07cm^2/V{\cdot}s$.

• Journal of Welding and Joining
• /
• 제25권6호
• /
• pp.78-83
• /
• 2007

The wettability of Sn-Xwt%Cu(X=$0{\sim}3wt%$) solder was evaluated with wetting balance tester. And, the intermetallic compounds(IMCs) which were formed at the interface between solders and pads were investigated by using scanning electron microscopy(SEM) and energy dispersive spectroscopy(EDS). The wetting force of Sn-0.7wt%Cu solder was higher than that of 100wt%Sn and Sn-3.0wt%Cu solder. The value of $\gamma_{fl}$ and ($\gamma_{fs}-\gamma_{ls}$) had a tendency to increase with increasing the wetting temperature. The activation energy with bare Cu pad and flux with 15% solid content was increased in the following order: Sn-0.7Cu (68.42 kJ/mol) ; Sn-3.0Cu(72.66 kJ/mol) ; Sn solder(94.53 kJ/mol). It was identified that the Cu6Sn5 phase was formed at the interface between Sn-Xwt%Cu solder and Cu pad.

• Advances in concrete construction
• /
• 제15권1호
• /
• pp.11-22
• /
• 2023

Autogenous healing of concrete can be helpful in structural maintenance by healing cracks using a healing material created by the precipitation of calcite and by the hydration of unhydrated binder around the cracks. Against this backdrop, this study investigated the physicochemical properties and autogenous healing performance of ternary blended binder composed of ordinary Portland cement (OPC), blast furnace slag (BFS), and calcium sulfoaluminate (CSA) clinker. Ternary blended binders with various contents of OPC-BFS-CSA clinker were prepared, and their physicochemical properties and autogenous healing performances were examined using various analytical techniques and visually observed using a microscope. The obtained results indicated that increase in the BFS content accompanied the increased the amount of unreacted BFS even after 28 days of curing and had a positive effect on the autogenous healing performance due to its latent hydration. However, replacing the CSA clinker did not increase the autogenous healing performance owing to an insufficient sulfate source for the formation of ettringite. The main precipitates around the cracks were calcite, C-S-H. Other hydration products such as portlandite, monosulfate, and ettringite, which were not found in the Raman and scanning electron microscope analyses.