• 제목/요약/키워드: adsorption ratio

검색결과 612건 처리시간 0.03초

SCR 탈질 폐촉매로부터 강염기성 음이온교환수지를 이용한 바나듐/텅스텐 분리거동 고찰 (Separation Behavior of Vanadium and Tungsten from the Spent SCR DeNOX Catalyst by Strong Basic Anion Exchange Resin)

  • 허서진;전종혁;김철주;정경우;전호석;윤도영;윤호성
    • 자원리싸이클링
    • /
    • 제29권5호
    • /
    • pp.38-47
    • /
    • 2020
  • 본 연구에서는 SCR 탈질 폐촉매의 소다배소-수침출 공정을 통해 얻은 침출액으로부터 강염기성 음이온교환수지인 Lewatit monoplus MP 600을 사용하여, V과 W의 분리/회수를 위한 흡착반응에 영향을 미치는 인자들에 대하여 알아보고, 이를 통하여 흡착 메커니즘을 조사하였다. V과 W 혼합용액의 경우 pH 2-6에서는 두 이온 모두 높은 흡착률을 보였지만, pH 8에서 W의 흡착은 크게 저하되었다. 흡착등온실험에서 V과 W 모두 Langmuir 흡착등온식에 적합하였고, 반응속도론적 고찰 결과 pseudo-second-order에 적합하였다. 침출액에서 V과 W의 흡착을 저해하는 Si를 제거하기 위하여 H2SO4로 pH를 조절하여 흡착실험을 수행한 결과, pH 8.5에서 가장 낮은 W 흡착률을 보였다. W의 탈착은 강산성 용액에서 거의 이루어지지 않았으며 V은 강산성 용액과 강염기성 용액 모두에서 탈착이 잘 이루어졌다.

Polysulfone으로 제올라이트를 고정화한 새로운 PS-zeolite 비드에 의한 Sr 이온 및 Cs 이온의 흡착 특성 (Adsorption Characteristics of Sr ion and Cs ion by a Novel PS-zeolite Adsorbent Immobilized Zeolite with Polysulfone)

  • 이창한;박정민;감상규;이민규
    • 한국환경과학회지
    • /
    • 제24권5호
    • /
    • pp.671-678
    • /
    • 2015
  • The adsorption characteristics of Sr and Cs ions were investigated by using PS-zeolite beads prepared by immobilizing zeolite with polysulfone (PS). The adsorption kinetics of Sr and Cs ions by PS-zeolite beads was described well by the pseudo-second-order model. The maximum adsorption capacities of Sr and Cs ions calculated from Langmuir isotherm model were 65.0 mg/g and 76.4 mg/g, respectively. In the binary system of Sr ion and Cs ion, the adsorption capacities of each ion decreased with increasing mole ratio of mixed counterpart ion, and Cs ion showed the higher hinderance than Sr ion. We found that thermodynamic properties of Sr and Cs ions on absorption reaction were spontaneous and endothermic at 293 to 323 K.

흡착제 크기에 따른 GAC의 멜라민 흡착 처리 : 반응속도와 분산-확산 (Treatment of Melamine by GAC Adsorption According to Adsorbent Size: Kinetics and Dispersion-Diffusion)

  • 이재엽;이상중;한인섭
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제18권3호
    • /
    • pp.65-72
    • /
    • 2013
  • Adsorption of melamine was examined using columns packed with granular activated carbon (GAC). Raw GAC was sieved with 20, 40, 60 and 80 mesh to determine the influence of adsorbent particle size on reaction and diffusion. The mass ratio of the adsorption capacity of GAC for melamine ranged from 9.19 to 11.06%, and adsorption rates increased with decreasing particle size within this range. Rate constants between 3.295 ~ 4.799 $min^{-1}$ were obtained using a pseudofirst-order equation that was used to determine adsorption kinetics. A surface diffusion model was adapted to take into account the unsteady-state equation of a spherical adsorbent by converting the surface concentration from a constant to a variable governed by a dispersion equation. The calculated values were fit with the experimental results by using the diffusion coefficients as regression parameters. The modified equation exhibited a more precise agreement with respect to the sum of the absolute error (SAE).

대나무 고온탄을 이용한 유기성 폐수처리 (Organic Wastewater Treatment by using Bamboo Charcoal)

  • 김선화;김해진;김준태
    • 환경위생공학
    • /
    • 제22권1호
    • /
    • pp.17-27
    • /
    • 2007
  • This study was conducted the adsorption experiment way of organic wastewater (BOD, COD, TOC, T-N, T-P) by changing the carbonization temperature and the size of adsorbent to examine the adsorption capacity of Korean traditional charcoal which has similar characteristics to activated carbon of organic pollutants. Also, it was performed the basic experiment for pH and inorganic materials. As a result of observing Korean traditional charcoal with has the greatest inorganic contents which are the important factor of chemical adsorption. As the carbonization temperature was better high temperature charcoal than law temperature charcoal to adsorption capacity of pollutant and as the particle was minute (D size : $3.35mm{\sim}2.0mm$), it was most effective. The result of adsorption experiment of organic wastewater show that the elimination ratio of pollutants by bamboo high temperature charcoal was found as BOD(82.1%), COD(91.7%), TOC(52.4%), T-N(66.6%), T-P(83.2%) and it has most excellent adsorption capacity of organic pollutants.

DBHQ-OPP foam에 의한 Hg(II)의 흡착과 분리 (On the Separation and Adsorption of Hg(II) by DBHQ-OPP Foam)

  • 성창근;문영자;김찬조
    • 농업과학연구
    • /
    • 제10권2호
    • /
    • pp.345-353
    • /
    • 1983
  • 수용액에 존재하는 중금속이온중의 Hg(II)을 정량적으로 분리 회수하기 위하여 DBHQ(5. 7-dibromo-8-hydroxyquinoline)을 Open-pore polyurethane foam (OPP foam)에 침윤시켜 수지의 응용성을 연구하였다. Hg(II)의 흡착은 DBHQ와 1:2 몰비의 착물형성이 이루어지며 Hg(II)의 흡착과 분리는 Batch법으로 실험하여 최적조건을 결정하였다. 가장 양호한 흡착은 DBHQ의 등전점인 pH5.0 부근에서 그리고 분리하는데는 4M-HCl, 50% 아세톤 용매를 사용하였을 경우가 비교적 정량적인 흡착과 분리가 이루어지는 조건이었으며 이와같은 결과를 기초로 DBHQ-OPP foam에 대한 Hg(II)의 흡착 및 분리에 대한 반응메카니즘을 제안했다.

  • PDF

Hexane 용액중(溶液中)에서 점토용물(粘土鏞物)에 의(依)한 PCP 흡착(吸着) (Adsorption of Pentachlorophenol (PCP) on Clay Minerals from Hexane Solution)

  • 최정
    • 한국토양비료학회지
    • /
    • 제7권3호
    • /
    • pp.141-145
    • /
    • 1974
  • Hexane 용액중(溶液中)에서 점토광물(粘土鑛物)에 의한 PCP 흡착실험(吸着實驗)을 행(行)하여 점토표면(粘土表面)에서의 PCP의 상태(狀態)를 조사(調査)하였다. PCP는 수용액(水溶液)에서 보다 Hexane 용액(溶液)에서 더욱 많은 양(量)이 점토(粘土)에 흡착(吸着)된다. 점토광물중(粘土鑛物中)에서도 규반비(珪礬比)가 약(約)1인 Allophane과 Imogolite가 가장 많은 PCP를 흡착(吸着)하며, 이 흡착현상(吸着現象)은 PCP와 점토광물간(粘土鑛物間)의 dipole-dipole interaction에 의하여 일어난다. Hexane 용액(溶液)에서 PCP가 점토광물(粘土鑛物)에 의하여 흡착(吸着)될 때는 점토광물(粘土鑛物)의 전표면적(全表面積)보다 표면성질(表面性質) 및 교환성(交煥性) 양(陽) ion에 의(依)하여 흡착량(吸着量)이 좌우(左右)되었다.

  • PDF

바이올린 플레이트의 도장처리(塗裝處理)가 흡습성(吸濕性)과 진동모드에 미치는 영향(影響) (Effects of Finishing of Violin Plate on Its Adsorption and Vibration Modes)

  • 권주용;정희석
    • Journal of the Korean Wood Science and Technology
    • /
    • 제26권3호
    • /
    • pp.16-25
    • /
    • 1998
  • This study was carried out to compare vibrational properties and adsorption among shellac, cashew finished plate and untreated plate of Sitka spruce(Picea sitchensis Carr). By the method of statistical regression modeling, the fundamental resonance frequency of finished plate was higher than that of untreated plate. The fundamental resonance frequency of cashew finished plate was higher than that of shellac finished plate. By the method of modal analysis, mode frequency ratio of cashew finished plate was higher than that of shellac finished plate. Amounts of adsorption of finished plate was lower than that of untreated plate, and amount of adsorption of cashew finished plate was lower than that of shellac finished plate. It was clarified that the vibrational properties and adsorption of finished plate were superior to those of untreated plate. The vibrational properties and adsorption of cashew finished plate was superior to those of shellac finished plate.

  • PDF

Removal of volatile organic compounds from air using activated carbon impregnated cellulose acetate electrospun mats

  • Patil, Kashyap;Jeong, Seonju;Lim, Hankwon;Byun, Hun-Soo;Han, Sangil
    • Environmental Engineering Research
    • /
    • 제24권4호
    • /
    • pp.600-607
    • /
    • 2019
  • Volatile organic compounds (VOCs) are released from various sources and are unsafe for human health. Porous materials are promising candidates for the adsorption of VOCs owing to their increased ratio of surface area to volume. In this study, activated carbon (AC) impregnated cellulose acetate (CA) electrospun mats were synthesized using electrospinning for the removal of VOCs from the air mixture of ACs, and CA solution was electrospun at different proportions (5%, 10%, and 15%) in a single nozzle system. The different AC amounts in the electrospun mats were distributed within the AC fibers. The adsorption capacities were measured for acetone, benzene, and dichloromethane, using quartz crystal microbalance. The results elicited an increasing adsorption capacity trend as a function of the impregnation of ACs in the electrospun mats, while their capacities increased as a function of the AC concentration. Dichloromethane resulted in a faster adsorption process than acetone and benzene owing to its smaller molecular size. VOCs were desorbed with the N2 gas purging, while VOCs were adsorbed at higher temperatures owing to the increased vapor pressures. The adsorption analysis using Dubinin-Astakhov equation showed that dichloromethane is more strongly adsorbed on mats.

Cationized Lignin Loaded Alginate Beads for Efficient Cr(VI) Removal

  • Jungkyu KIM;YunJin KIM;Seungoh JUNG;Heecheol YUN;Hwanmyeong YEO;In-Gyu CHOI;Hyo Won KWAK
    • Journal of the Korean Wood Science and Technology
    • /
    • 제51권5호
    • /
    • pp.321-333
    • /
    • 2023
  • In this study, lignin, a lignocellulosic biomass, was chemically modified to produce polyethyleneimine-grafted lignin (PKL) with maximum hexavalent chromium [Cr(VI)] adsorption capacity. Changes in the physicochemical properties due to the cationization of lignin were confirmed through elemental analysis, Fourier transform infrared spectroscopy, and moisture stability evaluation. Alginate (Alg) beads containing PKL (Alg/PKL) were prepared by incorporating cationic lignin into the Alg matrix to apply the prepared PKL in a batch-type water treatment process. The optimal Alg/lignin mixing ratio was selected to increase the Cr(VI) adsorption capacity and minimize lignin elution from the aqueous system. The selected Alg/PKL beads exhibited an excellent Cr(VI) removal capacity of 478.98 mg/g. Isothermal adsorption and thermodynamic analysis revealed that the Cr(VI) removal behavior of the Alg/PKL beads was similar to that of heterogeneous chemical adsorption. In addition, the bulk adsorbent material in the form of beads exhibited adsorption behavior in three stages: surface adsorption, diffusion, and equilibrium.

금속 이온이 교환된 석탄 비산재 유래 합성 제올라이트 물질의 암모니아 흡착성능 평가 (Evaluation of Ammonia Adsorption Capacity Using Various Metal Ion-Exchanged Zeolitic Materials Synthesized from Coal Fly Ash )

  • 박종원;곽주영;이창한
    • 한국환경과학회지
    • /
    • 제32권5호
    • /
    • pp.343-353
    • /
    • 2023
  • A zeolite material (ZCH) was synthesized from coal fly ash in an HD thermal power plant using a fusion/hydrothermal method. ZCH with high crystallinity could be synthesized at the NaOH/CFA ratio of 0.9. Ion-exchanged ZCH adsorbents for ammonia removal were prepared by ion-exchanging various cation (Cu2+, Co2+, Fe3+, and Mn2+) on the ZCH. They were used to evaluate the ammonia adsorption breakthrough curves and adsorption capacities. The ammonia adsorption capacities of the ZCH and ion-exchanged ZCHs were high in the order of Mn-ZCH > Cu-ZCH ≅ Co-ZCH > Fe-ZCH > ZCH according to NH3-TPD measurements. Mn-ZCH ion-exchanged with Mn has more Brønsted acid sites than other adsorbents. The ion-exchanged Cu2+, Co2+, Fe3+, or Mn2+ ions uniformly distributed on the surface or in the pores of the ZCH, and the number of acidic sites increased on the alumina sites to form the crystal structure of zeolite material. Therefore, when the ion-exchanged ZCH was used, the adsorption capacity for ammonia gas increased.