• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.77-80
• /
• 2006

Graft copolymerized polycarboxylate(PC)-type superplasticizers(PCs) which have carboxylic acid with $\pi$ bond among the molecular structure and polyethyleneglycol methyl ether methacrylate(PMEM) were synthesized by free radical reaction and investigated the chemical structure, polymerization condition, and physical and chemical properties. Also, the effects of PCs in the dispersion, adsorption and hydration of cement were evaluated. As the molecular weight of graft chain decreases, the adsorption amount on cement particles increased. It was advantageous for the flow to reduce molar ratio, the lower the side bone molecular weight, and increase the molar ratio, the larger the side bone molecular weight. The hydration reaction speed was highly delayed at day 1, due to increase in molar ratio and reduction in side bone molecular weight, but it was recovered in the days after.

• 한국염색가공학회지
• /
• 제20권1호
• /
• pp.16-21
• /
• 2008

In this study the effects of swelling and fixing agent for the cotton side of polyester/cotton blended fabrics and the thermosol temperature on the dyeing properties and fastness. were investigated, when the polyester/cotton blended fabrics were dyed with a disperse dye which was able to dye both side of fiber by one bath one step thermosol process. The obtained results are as follows; The dye adsorption decreased with the increase of cotton blend ratio in polyester/cotton blended fabrics, when the ratio of swelling and fixing agent for cotton side was constant. As the thermosol temperature increased up to $210^{\circ}C$, the dye adsorption were increased, but that effect was less significant when the cotton blend ratio was higher.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.446-450
• /
• 2003

T.f. 및 T.t. 박테리아의 흡착정도와 침출효율 간에 선형적인 비례관계는 관찰되지 않았다. 동일 배양균에서 재생로의 분진 즉 기질입자의 크기가 감소함에 따라 박테리아의 흡착정도와 Cu의 추출속도는 분명하게 선형적으로 증가했다. 다른 종류의 기질에 비해 재생로 분진에서 침출속도가 빠른 것은 주로 분진입자의 부서지기 쉬운 성질 때문으로 추정된다.

• 한국환경과학회지
• /
• 제7권1호
• /
• pp.104-111
• /
• 1998

The Dongbok lake water before and after alum coagulation and activated carbon adsorption were analyzed in terms of organic contents, molecular weight distributuin (MWD), and UV-absorbance. Dissolved organic compounds in the Dongbok lake were fractionated into three molecular size classes by gel permeation chromatography. The fractionation was reasonably successful in isolating compounds with The bulk of the dissolved carbon was present in compounds of molecular weight in the range of 3,000~10,000. Alum coagulation preferentially treated molecules of high molecular weight, which has molecules larger than 10,000. The dissolved organic carbon (DOC) removal after activated carbon adsorption was high in the Fraction B , IR . The $A_{260}$/DOC ratio after alum and activated carbon treatment the Fraction II, III. This results suggest that the organics remaining after each treatment has a trihalomethane formation potential

• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.577-582
• /
• 1999

Activated carbon fibers were prepared from stabilized PAN fibers by chemical activation using hydroxide. The variations in specific surface area amount of iodine adsorption micro-structure and pore size distribution in the activated carbon fibers after the activation process were discussed. In the chemical activation using potassium hydroxide specific surface area of about 2545m2/g and amount of iodine adsorption of 2049 mg/g were obtained at the condition of KOH/fiber ratio of 1 and 800$^{\circ}C$ Nitrogen adsorption isotherms for PAN based activated carbon fibers showed the type I in the Brunauer-Deming-Deming-Teller classification indicating the micro-pores consisting the activated fibers.

• 대한환경공학회지
• /
• 제27권3호
• /
• pp.231-239
• /
• 2005

본 연구에서는 MTBE, 카드뮴의 점토광물 종류 및 물리화학적 특성에 따른 흡착 경향 및 계면동전위의 특성을 규명하고자 흡착시간, 혼합비(용매 대 흡착질 비), 오염물질의 농도, 휴믹산 및 pH 변화에 따른 회분식 흡착실험을 수행하였다. 혼합비가 증가할수록 초기농도에 상관없이 흡착량은 증가한 반면, 흡착 효율은 감소하였다. MTBE의 흡착량은 vermiculite> bentonite> CTAB-bentonite 순으로 높았으며, 카드뮴의 흡착량은 bentonite> vermiculite> CTAB-bentonite 순이었다. 이때 MTBE 흡착은 Freundlich 등온 흡착식에 가장 잘 부합되었으며, 카드뮴의 경우 Langmuir 등온 흡착식에 잘 적용되었다. 유기물 함량에 따른 MTBE의 흡착실험 결과 CTAB-bentonite는 유기물의 함량이 높을수록 흡착량이 증가하였으나 bentonite는 유기물 함량 1%, vermiculite는 5%에서 최대 흡착량을 보인 후 감소하였다. 반면 카드뮴은 유기물 함량이 증가할수록 모든 흡착제의 흡착량과 흡착율이 급격히 증가하였다. 카드뮴의 흡착량과 흡착율은 모든 흡착제에 대해 pH 8 이상부터 급격히 증가하였으며, pH 10 이상의 경우 흡착율이 90%까지 증가하였다. 또한 pH가 증가할수록 각 흡착제의 계면동전위는 감소하였고, 카드뮴의 농도가 증가할수록 계면동전위의 절대치가 감소하여 분산안정성이 낮아져 결과적으로 카드뮴의 흡착 효율이 증가하였다.

• 한국환경농학회지
• /
• 제11권3호
• /
• pp.195-200
• /
• 1992

매장량(埋藏量)이 풍부한 peat를 중금속(重金屬) 흡착제(吸着劑)로서의 이용(利用) 가능성(可能性)을 확인(確認)하기 위한 실험(實驗)을 행한 결과(結果) 다음과 같았다. Peat의 입자(粒子)가 적을수록 중금속(重金屬) 흡착(吸着)이 효과적(效果的)이었으며 동일(同一) 농도용액(濃度溶液)에서 중금속(重金屬) 흡착량(吸着量)은 $Cu^{2+}$ > $Cd^{2+}$ > $Zn^{2+}$순(順) 이었다. Peat는 pH $4{\sim}5$사이에서 중금속(重金屬)의 최대흡착(最大吸着)이 일어났다. 중금속(重金屬) 농도(濃度)가 증가(增加)할수록 중금속(重金屬)의 흡착량(吸着量)의 증가(增加)되었으나 흡착율(吸着率)은 감소(減少)되었다. Peat에 의한 중금속(重金屬) 이온흡착은 Freundlich 흡착등온식(吸着等溫式)에 잘 적용(適用)되므로 효과적(效果的)인 흡착제(吸着劑)로 생각되며 peat에 PEI(polyethylenimine)를 처리(處理)하면 중금속(重金屬)의 흡착량(吸着量)이 증가(增加)하여 효과적(效果的)이었다. 중금속(重金屬) 흡착후(吸着後) peat의 처리방법(處理方法)은 열량(熱量)이 풍부하여 연료원(燃料源)으로 사용후(使用後) 용량(容量)을 줄일 수 있어서 경제적(經濟的)인 처리방법(處理方法)으로 생각된다.

• 환경위생공학
• /
• 제17권3호
• /
• pp.99-109
• /
• 2002

Charcoal $tube/CS_2$ method are more popularly used than any other in the measurement of the working environment for the exposure evaluation of organic solvent, but it is some weak points that the lower accuracy can be obtained on the polar materials and within the range of the low concentration. Thus solvent desorption method has been developed to make accuracy higher and to overcome some weak points. However, because of high price of adsorption tube for thermal desorption and the short of study on its application to the working environment, it is not popularly used in the domestic industrial hygiene fields. This dissertation aims to develop thermal desorption and adsorption tubes for measuring organic solvents in the working environment, by comparing and analyzing breakthrough condition and adsorption capacity with ACF. Specific surface area of ACF used in this study is wider than the one of AC and micropore of ACF related with adsorption has been developed, and adsorption velocity and adsorption amount are very excellent by linking a pore of surface and an inside well into micropore. 1. Result of analysis on physical characteristics of adsorbent, the specific surface area of ACF was 1.3 times higher than that of AC. Distribution ratio of micropore related to adsorption was 94% on ACF and AC. Result of SEM, micropore of the AC is opened to the surface. In contrast, ACF shows that extremely fast adsorption speed. Because of micropore are exposed on the surface and penetrate through each other. 2. Breakthrough characteristics of adsorbents was not different from slop of breakthrough curve. The effluent concentration reaches 10% of initial concentration($C_{out}/C_{in}=0.1$, break point) of ACF was 30~316min longer than that of AC. Therefore, the adsorption capacities of ACF was 1.1~4.6 times higher than that of AC. ACF can be used as a proper adsorbent for measurement of organic solvent.

• 상하수도학회지
• /
• 제11권4호
• /
• pp.110-117
• /
• 1997

Performances of combined adsorption and coagulation were evaluated as one of the options for pre-treatment or post-treatment of MSW landfills leachate and industrial landfill leachate. The COD and color removals of leachate from an old MSW landfill were 35% and 33% at an alum dose of 300mg/L with preceding PAC(powdered activated carbon) dose of 200mg/L, respectively. The COD and color removals of leachate from an young MSW landfill were 58% and 25% at an alum dose of 700mg/L and PAC dose of 500mg/L, respectively. The COD and color of biologically treated leachate from an industrial waste landfill were removed up to 32% and 68%, respectively, with pH control at addition of 500mgAlum/L and 1,000mgPAC/L. Adsorption and coagulation process with pH control showed better COD and color removals than the process without pH control for biologically treated leachate from an industrial waste landfill. The color removal was influenced greatly by pH control, while COD removal was not significant. No difference in removal efficiency was observed between adsorption-coagulation and coagulation-adsorption process. The COD removal was accomplished mainly by adsorption, while coagulation was a key mechanism of color removal. However, the mechanism of COD removal was obscure, when BOD/COD ratio was high. Maximum net increases in COD and color removals by the adsorption-coagulation process were respectively 45% and 46% compared with the unit process of adsorption or coagulation, although those removals depended on leachate characteristics. Thus, adsorption-coagulation process was considered to be effective for pre- and post-treatment of landfill leachate, and has distinct features of simple, flexible, stable and reliable operation against fluctuation leachate quality and flowrate.

• 공업화학
• /
• 제9권1호
• /
• pp.20-27
• /
• 1998

CTAB에 의한 CuS 침전 미립자의 응집과 기포 흡착특성을 고찰하였다. CTAB의 기포흡착은 Langmuir흡착식을 따르며, 포말간 본체액의 동반을 고려한 회분해석으로부터 구한 흡착열은 3700cal/mol로 나타났다. CTAB에 의한 CuS미립자의 기포흡착은 기포-입자간 충돌흡착으로 설명되었고, 흡착분리에 대한 최적 농도비는 CuS의 최적 응집농도비와 일치하였으며, 그 값은 [CTAB] 대 [CuS]가 0.1로 얻어졌다. 기포에 의한 포집효율은 pH와 CTAB농도 등에 의존하나 공기의 유량에는 무관하였으며, 최대 포집효율은 최적 첨가농도에서 0.0002로 나타났다. 또한 Cu-Cd-Zn 황화물의 혼합계에서 CTAB를 사용한 기포흡착의 경우 ZnS의 선택적 분리가 가능하였다.