• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.168-171
• /
• 2001

Organobentonite modified with hexadecyltrimethylammonium (HDTMA) was used to quantify an adsorption of heavy metals. Based on preliminary experiments, optimal soil/solution ratio, a range of pH, and electrolyte were selected. Adsorption experiments of cadmium and lead were conducted to quantify an adsorption selectivity to bentonite and organobentonite. Adsorption of cadmium and lead to bentonite was increased with increasing a soil/solution ratio. Adsorption of cadmium and lead to bentonite was increased with increasing a soil/solution ratio. Adsorptions of heavy metal to organobentonite were slightly reduced relative to bentonite. This study used the principle of hard-soft-acid-base (HBAB) to interpretate an adsorption mechanism. Because of competition between cadmium and lead. adsorption of cadmium and lead was reduced in mixture of heavy metals. Adsorption selectivity.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제7권4호
• /
• pp.24-30
• /
• 2002

본 연구에서는 카올리나이트에 대한 납의 흡착 특성을 규명코자 실내에서 회분식 흡착시험을 수행하였다. 회분식 흡착시험에서는 흡착평형도달시간, 흡착능 및 흡착등온식을 연구하였고 pH와 혼합비에 따른 카올리나이트에 대한 납의 흡착특성에 미치는 영향을 분석하였다. 실험결과 카올리나이트에 대한 납의 흡착은 24시간 이내에 평형에 도달하였고 초기오염농도가 증가함에 따라 카올리나이트에 대한 납의 흡착량은 증가하나 초기농도 198mg/l 이상에서는 흡착율은 감소하였다 Freundlich 흡착등온식에 적용한 결과 흡착강도를 나타내는 계수 1/n은 0.9584이다. 그리고 pH 값이 증가함에 따라 초기오염농도에 관계없이 카올리나이트에 대한 납의 흡착량 및 흡착율은 증가되었으며 pH 8 이상에서는 일정한 값에 수렴하였다. 또한 혼합비가 증가함에 따라 흡착량은 증가하였다. 반면에 흡착율은 점점 증가하다가 일정 혼합비 8 이상에서는 감소하는 경향이 있음을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.51-56
• /
• 1996

The Bark lignin(alkali- and acid lignin), bark extractives(hot water-and $Na_2SO_3$ extractives) of Quercus acutissima and Pinus densiflora, and flavonoids were used to detect heavy metal adsorption. The adsorption ratio of heavy metals by lignin was assigned for 40 to 50%, but was not dependent on lignin kinds. However, in case of the addition of light metals such as $Ca^{++}$ and $Mg^{++}$ to lignin the adsorption ratio was increased by 20 to 40%, and $Pb^{++}$ was almost completely adsorbed. On hot water extractives, the adsorption ratio was very low because the substrate was water-soluble, so the substrate should be water-insoluble to adsorb the heavy metals. However, the adsorption ratios of $Cd^{++}$ and $Pb^{++}$ on $Na_2SO_3$ extractives were significantly increased, while those of $Zn^{++}$ and $Cu^{++}$, were similar to lignin. When four kinds of heavy metals were treated to $Na_2SO_3$ extractives together, more than 97% of $Pb^{++}$ and $Cu^{++}$ was adsorbed_ and $Zn^{++}$ was more adsorbed by 40%, and $Cd^{++}$ was not changed, comparing with the case that on kind of heavy metal was treated. There were differences between adsorption ratio of the kinds of flavonoids and heavy metals, and the adsorption ratio of heavy metals was assigned to 20 to 45% per 0.1g flavonoid.

• KSBB Journal
• /
• 제10권4호
• /
• pp.358-369
• /
• 1995

A mathematical model using local thermodynamic equilibrium isotherms for adsorption in encapsulated adsorbent is proposed in order to optimize the design parameters in situ bioproduct separation process. The model accurately follows the experimental data on the adsorption of berberine, secondary metabolite produced in Thaictrum rugosum plant cell culture. The adsorption rate on encapsulated adsorbent is compared with that on alginate-entrapped adsorbent. The result shows that the higher loading capacity in encapsulated adsorbent is mainly due to the increase in the maximum solid phase concentration. Based on the adsorption rate and loading capacity, the encapsulated adsorbent would be more useful than the entrapped adsorbent when used in situ bioproduct separation process. Design parameters in situ bioproduct separation process, such as the size of the capsule, membrane thickness, the ratio of capsule volume to bulk volume, the ratio of single capsule volume to total capsule volume and the adsorbent content in the capsule, are evaluated by using the model. The ratio of single capsule volume to total capsule volume is the most effective parameter for adsorption of berberine on encapsulated adsorbent.

• Journal of the Korean Wood Science and Technology
• /
• 제28권2호
• /
• pp.49-56
• /
• 2000

본 연구는 용액의 처리조건에 따른 미처리 수피에 의한 중금속 흡착을 연구하기 위하여 계획되었다. 흡착에 미치는 용액의 온도와 pH, 수피의 입자크기, 경금속 첨가의 영향이 연구되었고, 또한 중금속간의 흡착경쟁도 평가되었다. 용액의 온도를 $-5^{\circ}C$에서 $10^{\circ}C$까지 증가시킴에 따라 $Cu^{2+}$와 $Zn^{2+}$의 흡착율이 증가하였다. 그러나, 이 흡착은 $10^{\circ}C{\sim}55^{\circ}C$에서는 거의 일정하였다. $Cr^{6+}$은 용액의 온도를 증가시킴에 따라 계속적으로 증가하였다. $Cu^{2+}$, $Zn^{2+}$ 및 $Pb^{2+}$의 최대 흡착율은 pH 6~7에서 나타났다. 그러나, 이 흡착율은 최적 pH 의 양 영역에서는 급격하게 감소하였다. $Cr^{6+}$의 흡착율은 용액의 pH를 증가시킴에 따라 계속적으로 감소하였다. 수피의 입자크기가 작을수록 흡착율은 감소하였다. 소나무 수피와 상수리나무 수피 간의 흡착 경향은 차이가 거의 없었다. $Ca^{2+}$이나 $Mg^{2+}$(10~25 ppm)의 첨가에 의해 $Cu^{2+}$, $Zn^{2+}$의 흡착율이 증가되었다. 흡착율의 증가는 소나무 수피보다 상수리나무 수피에서 더 높았다. 그러나 $Pb^{2+}$와 $Cr^{6+}$은 경금속의 첨가에 영향을 받지 않았다. 2~3종류의 중금속 혼합용액 ($Cu^{2+}$, $Pb^{2+}$, $Zn^{2+}$)을 미처리 수피로 처리할 경우, $Zn^{2+}$의 흡착은 중금속 이온간의 흡착경쟁 때문에 현저하게 감소되었다. 또한, $Cu^{2+}$의 흡착도 다소간 감소되었다. 그러나 $Pb^{2+}$의 흡착은 다른 중금속 이온의 존재에 의해서 영향받지 않았다.

• BMB Reports
• /
• 제30권5호
• /
• pp.346-351
• /
• 1997

The maximum adsorption/desorption conditions and the adsorption mechanism of globular proteins to vaccine adjuvants were determined. The maximum adsorption ratio of protein to the $Al^{3+}$ content of aluminum oxyhydroxide and the optimal adsorption pH are 2:1 (${\mu}g:{\mu}g$) for bovine serum albumin (BSA) at pH 6.0 and 2.5:1 (${\mu}g:{\mu}g$) for immunoglobulin G (IgG) at pH 7.0, respectively. The maximum adsorption ratio onto aluminum phosphate gel was 1.5:1 (${\mu}g$ Protein:${\mu}g$ $Al^{3+}$) at pH 5.0 for both BSA and IgG. Adsorption of the native globular proteins, BSA and IgG, to aluminum oxyhydroxide and aluminum phosphate gel was reversible as a function of pH. Complete desorption of these proteins from aluminum phosphate gel was observed at alkaline pH, whereas only 80~90% removal from aluminum oxyhydroxide was achieved with alkaline pH and 50 mM phosphate buffer. We conclude that electrostatic and hydrogen bonding interactions between the native proteins and adjuvants are important binding mechanisms for adsorption, and that the surface charge of the protein and the colloid components control the maximum adsorption conditions.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제6권3호
• /
• pp.21-29
• /
• 2001

양이온성 계면활성제인 HDTMA를 이용하여 치환시킨 유기 벤토나이트의 중금속 흡착능을 알아보았다. 카드뮴과 납의 흡착량은 pH와 흡착제 대 용액 비가 증가함에 따라 증가하였다. 이 실험을 통해 적정 pH 범위와 흡착제 대 용액 비를 결정하였다. 유기 벤토나이로의 중금속 흡착은 벤토나이트에 비해 약간 감소하였으며, 두 가지 중금속이 함께 존재하는 경우 경쟁에 의해 흡착량은 더 감소하였다. 유기 벤토나이트의 경우 카드뮴에 비해 납의 흡착 감소량은 더 두드러지게 나타났다. 이러한 흡착 mechanism을 hard-soft-acid-base (HSAB) 원리를 사용하여 설명하였다.

• 한국환경농학회지
• /
• 제15권3호
• /
• pp.391-398
• /
• 1996

The pretreatment of bark powder with sodium hydroxide and formalin showed the most excellent adsorption ratio, but this method could not practically be used because of the occurrence of dark-colored pigments in filtrates during pretreatment. Instead, acid and formalin were the most affirmative and effective among the pretreatment methods tested, and could be used for this purpose. Among tested species, Quercus acutissima and Robinia pseudo-accacia showed the largest amount of metal adsorption, and $Pb^{2+}$ was the best(83 to 96%) among the four heavy metals tested. The order of adsorption ratios other metals was as follows; $Cu^{2+}$ > $Zn^{2+}$ > $Cd^{2+}$, and the ratio was approximately 45 to 55%. In addition, as the substrate amount increased, the amount of adsorbed heavy metals in subtrates gradually increased, but the adsorbed amount was not proportional to the substrate amount. The order of heavy metal adsorption was as follows; $Pb^{2+}$ > $Cu^{2+}$ > $Cd^{2+}$ > $Zn^{2+}$. Depending on flow rate and column size, pine bark power adsorbed more heavy metals in the 5ml/min flow rate and 3.5cm column size rather than the 10ml/min and 2.0cm. However, oak bark power showed contrary results compared with pine bark powder. The adsorption of $Pb^{2+}$ occurred rapidly in the incipient stagte. Even though bark powders were repeatedly used three times, there was no change in the adsorption ratio(45%), but after four times, the adsorption ratio was significantly reduced to 35%.

• 설비공학논문집
• /
• 제25권12호
• /
• pp.660-667
• /
• 2013

This study presents a numerical investigation of the heat and mass transfer kinetics of a fin-tube-type adsorption bed using a two-dimensional numerical model with silica-gel and water as the adsorbent and refrigerant pair. The performance is strongly affected by the heat and mass transfer in the adsorption bed, but the details of the mass transfer kinetics remain unclear. The validity of inter-particle models used to simulate mass-transfer kinetics were examined, such as a constant pressure model and non-constant pressure model, and the valid ranges of the diffusion ratio for each model are proposed. The COP and SCP have been numerically calculated as the performance indexes according to the diffusion ratio. The constant pressure model, which is commonly used in previous research, was found to be valid only in a limited range of diffusion ratio.

• 한국환경과학회지
• /
• 제17권8호
• /
• pp.919-924
• /
• 2008

The surface properties and adsorption rates of activated carbon modified with acid and base were compared. The distribution ratio of C and C-H on the surface of activated carbon were decreased by modification with acid and base, but the distribution ratio of C-O, C=O, and O=C-O were increased. Base modification damaged the surface of activated carbon more than acid modification, it caused the effect of 6 percent increments of surface area. Adsorption rate model was more suitable to second order equation than first order equation. Adsorption rate was controlled by adsorption in pore better than in surface.