• Korean Journal of Materials Research
• /
• 제1권4호
• /
• pp.184-190
• /
• 1991

Oxygen chemisorption on single crystal ZrC(111) surface was studied by high-resolution electron energy loss and ultraviolet photoelectron spectroscopy. At a low amount of oxygen exposure, adsorbed oxygen atoms construct $(\sqrt{3}{\times}\sqrt{3})R30^{\circ}$ structure. On the other hand, oxygen adsorption changes into $1{\times}1$ structure as the amount of oxygen exposure increases. The adsorbed oxygen atoms show smaller vertical distance from the Zr topmost layer in the $1{\times}1$ structure than in the $(\sqrt{3}{\times}\sqrt{3})R30^{\circ}$ structure and approach to the bridge site rather than 3-fold hollow site. The two different oxygen adsorption behavior comes from the two different surface stales of the clean ZrC(111) surface.

• Journal of Korean Society on Water Environment
• /
• 제31권4호
• /
• pp.392-398
• /
• 2015

The aim of this study was to investigate the bio-adsorption using modified zeolite with Mg (Mg-zeolite) in the dyeing wastewater treatment. Mg-zeolite adsorbed successfully 100% of the color, suspended solid (SS). chemical oxygen demand (COD), biological oxygen demand (BOD), total nitrogen (TN) and total phosphorus (TP) in the dyeing wastewater at the following optimal Mg-zeolite loading: 20 mg/L for colour, SS, TN and TP, 30 mg/L for BOD and COD. These results indicated that the amount of 1 mg/L Mg-zeolite adsorbed 11.6 mg/L for color, 9.5 mg/L for SS, 45.0 mg/L for COD, 12.7 mg/L for BOD, 0.91 mg/L for TP and 2.25 mg/L for TN. The bio-adsorbent, Mg-zeolite, can be a promising adsorption due to its high efficiency and low dose requirements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.212-212
• /
• 2012

The Coverage dependent attachment of multifunctional groups included in threonine molecules adsorbed to Ge (100)$-2{\times}1$ surface was investigated using core-level photoemission spectroscopy (CLPES) and density functional theory (DFT) calculations. The core-level spectra at a low coverage indicated that the both carboxyl and amine groups participated in the bonding with the Ge (100) surface by "O-H dissociated and N-dative bonded structure". However, at high coverage level, additional adsorption geometry of "O-H dissociation bonded structure" appeared possibly to minimize the steric hindrance between adsorbed molecules. Moreover, the C 1s, N 1s, and O 1s core level spectra confirmed that the carboxyl oxygen is more competitive against the hydroxymethyl oxygen in the adsorption reaction. The adsorption energies calculated using DFT methods suggested that four of six adsorption structures were plausible. These structures were the "O-H dissociated-N dative bonded structure", the "O-H dissociation bonded structure", the "Om-H dissociated-N dative bonded structure", and the "Om-H dissociation bonded structure" (where Om indicates the hydroxymethyl oxygen). These structures are equally likely, according to the adsorption energies alone. Conclusively, we investigate in threonine on Ge (100) surface system that the "O-H dissociated-N dative bonded structure" and the "O-H dissociation bonded structure" are preferred at low coverage and high coverage.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.70.1-70.1
• /
• 2012

In-situ X-ray photoelectron spectroscopy (XPS) and infrared (IR) spectroscopy studies of SOFC cathode materials will be discussed in this presentation. The mixed conducting perovskites (ABO3) containing rare and alkaline earth metals on the A-site and a transition metal on the B-site are commonly used as cathodes for solid oxide fuel cells (SOFC). However, the details of the oxygen reduction reaction are still not clearly understood. The information about the type of adsorbed oxygen species and their concentration is important for a mechanistic understanding of the oxygen incorporation into these cathode materials. XPS has been widely used for the analysis of adsorbed species and surface structure. However, the conventional XPS experiments have the severe drawback to operate at room temperature and with the sample under ultrahigh vacuum (UHV) conditions, which is far from the relevant conditions of SOFC operation. The disadvantages of conventional XPS can be overcome to a large extent with a "high pressure" XPS setup installed at the BESSY II synchrotron. It allows sample depth profiling over 2 nm without sputtering by variation of the excitation energy, and most importantly measurements under a residual gas pressure in the mbar range. It is also well known that the catalytic activity for the oxygen reduction is very sensitive to their electrical conductivity and oxygen nonstoichiometry. Although the electrical conductivity of perovskite oxides has been intensively studied as a function of temperature or oxygen partial pressure (Po2), in-situ measurements of the conductivity of these materials in contact with the electrolyte as a SOFC configuration have little been reported. In order to measure the in-plane conductivity of an electrode film on the electrolyte, a substrate with high resistance is required for excluding the leakage current of the substrate. It is also hardly possible to measure the conductivity of cracked thin film by electrical methods. In this study, we report the electrical conductivity of perovskite $La_{0.6}Sr_{0.4}CoO_{3-{\delta}}$ (LSC) thin films on yttria-stabilized zirconia (YSZ) electrolyte quantitatively obtained by in-situ IR spectroscopy. This method enables a reliable measurement of the electronic conductivity of the electrodes as part of the SOFC configuration regardless of leakage current to the substrate and cracks in the film.

• Journal of the Korean Vacuum Society
• /
• 제6권2호
• /
• pp.159-164
• /
• 1997

We have studied initial oxidation of the alkali metal(AM)/Si(111) surface using X-ray photoelectron spectroscopy(XPS) and reflection high energy electron diffraction(RHEED) at room temperature(RT) and high temperature(HT)(300~50$0^{\circ}C$). The oxidation of the Si(111)7$\times$7 surface was promoted by the adsorption of 1 momolayer(ML) AM, whereas no promotion occurred for submonolayer(<0.5 ML) adsorbed Si(111)7$\times$7 surface at RT. O Is core level spectra were measured with increasing oxygen exposure. It was found that the oxygen adsorbed on the Si(111)7$\times$7-AM surface have two different bond configuration, Si-O and Am-O, respectively. From these results, we discussed the role of AM-O bonding in the promoted oxidation. At HT(300~50$0^{\circ}C$), the AM-adsorbed surface became very inactive with the structural transformation to the 3$\times$1-AM. We present the results of the oxidation of the Si(111)3$\times$1-AM(Na, K, Cs) surface.

• Journal of Soil and Groundwater Environment
• /
• 제10권2호
• /
• pp.44-51
• /
• 2005

Fractional composition and mobility of some heavy metals in sediments from Okdong stream are investigated. The fractional scheme for heavy metals in the sediment was established for five chemically defined heavy metal forms as adsorbed fraction, carbonate fraction, reducible fraction, organic fraction, and residual fraction. The most abundant fraction heavy metals in the sediments is reducible and secondly abundant is organic fraction. Adsorbed fraction is minor part of the total heavy metals. Mobilization of heavy metals in the sediments from Okdong stream occur $19.8{\sim}56.7%$ of total cadmium concentrate. The most abundant fraction of the sediment metal is organic fraction in Cu, Pb metals investigated. Labile fraction of sediment metals are $0.5{\sim}48.5%$ of total Zn, $2.6{\sim}48.1%$ of total Pb, and $0.2{\sim}36.9%$ of total Cu, respectively. Most of labile fraction consists of reducible fraction for Cd, Zn, adsorbed fraction for Pb, reducible fraction for Cu, adsorbed fraction for Ni. The Mobilization of Zn and Cu is most likely to occur when oxygen depletes and that of Pb and Ni occurs when physical impact, oxygen depletion and pH reduction.

• Bulletin of the Korean Chemical Society
• /
• 제15권11호
• /
• pp.933-939
• /
• 1994

Using an atom superposition and electron delocalization molecular orbital (ASED-MO) method, we have investigated the vibrational and chemisorptive properties of adsorbates on a Pt(100) surface during CO oxidation. The calculated vibrational stretching frequency for a predicted structure of $[CO{\cdot}{\cdot}{\cdot}O]^*$ complex is 1642 $cm^{-1}$. The CO bond stretches by 0.05 ${\AA}$ when adsorbed on one-fold site, and is tilted by 30 ${\AA}$ from the surface normal. We find the decrease in CO vibrational frequency on going from the one-fold to the high coordination sites. Binding at the two-fold site is predicted to be favored for $Pt_{18}(100)$ and at the 1-fold site for $Pt_{23}(100)$. From the calculations of the steric interactions, we have found that pre-adsorbed oxygen modifies the surface so that CO is adsorbed on the one-fold site ordered in a $(\sqrt{2}{\times}{\sqrt}{2})R45^{\circ}$. Our results are in good agreement with recent experimental findings of Hong et al. [J.Phys. Chem. 1993, 97, 1258].

• Bulletin of the Korean Chemical Society
• /
• 제13권1호
• /
• pp.30-32
• /
• 1992

The apparent depth of space charge region on the ZnO $(10{\bar{1}}0)$ surface in chemisorption of oxygen has been estimated from the capacitance of two contacting faces. When the sample (donor concentration: $2.4{\times}10^{22}\;m^{-3}$) was evacuated at 773 K for 1 hr the depth reached to 40-100 ${\AA}$ depending on sample assembly. Admission of oxygen to the sample resulted in an increase of the depth to 3600 ${\AA}$ where the increment was greater at higher oxygen pressure between 6.6-1600 $N/m^2$. Admission of CO to the sample previously exposed to oxygen yields a decrease in the depth. The results of the measurement support that oxygen is adsorbed as an acceptor on ZnO $(10{\bar{1}}0)$.

• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.18-23
• /
• 2019

Chemical looping combustion (CLC) is a promising carbon capture and storage (CCS) technology whose efficiency and cost primarily relies on the oxygen carrier materials used. In this paper, gadolinium-doped ceria (GDC, Ce0.9Gd0.1O1.95) was added as a promoter to improve the oxygen transfer rate of MgMnO3-δ oxygen carrier materials. Increasing GDC content significantly increased the oxygen transfer rate of MgMnO3-δ-GDC composites for the reduction reaction due to an increase in the surface adsorption of CH4 via oxygen vacancies formed on the surface of the GDC. On the other hand, the oxygen transfer rate for the oxidation reaction decreased linearly with increasing GDC content due to the oxygen storage ability of GDC. Adsorbed oxygen molecules preferentially insert themselves into oxygen vacancies of the GDC lattice rather than reacting with (Mg,Mn)O to form MgMnO3-δ during the oxidation reaction.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.403-405
• /
• 2002

To study photocatalytic mechanism of metal doped $Ti0_2$, we investigated photodecomposition effect, photocurrent effect and antibacterial effect. When aluminium content was 2 wt %, photodecomposition effect was better than the others. Silver doped thin films had high photocurrent efficiency and antibacterial effect. This reactions were caused by dissolved oxygen in solution and oxygen adsorbed on surface of thin films.