• Journal of ILASS-Korea
• /
• v.15 no.2
• /
• pp.53-60
• /
• 2010

This study presents development of digital particle holographic system and its application to spray field to measure three-dimensional velocities and sizes of spray droplets. A double exposure hologram recording system with synchronization system for time control was established and digital holograms can be recorded in a short time interval. To process recorded holograms, the correlation coefficient method was used for focal plane determination of particles. To remove noises and improve the quality of holograms and reconstructed images, the Wiener filter was adopted. The two-threshold and image segmentation methods were used in binary image transformation. For particle pairing, the match probability method was adopted. The developed system was applied to spray field and three-dimensional velocities and sizes of spray droplets were measured. The measurement results of digital holographic system were compared with those made by laser instruments, PDPA(Phase Doppler Particle Analyzer), which proved the feasibility of in-line digital particle holographic system as a good measurement tool for spray droplets.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.63-68
• /
• 2004

The high pressure vessels that are constructed by welding process have many welding lines and most of the leakage defects are occurred on these welding lines. The acoustic emission(AE) technique has adopted to detect the defect location and leakage on welding parts, but the AE signal in leakage are incomplete due to the attenuation, reiteration, instability and limit of defect size. To overcome these troubles, the experiments in this study are conducted to measure the indirect media-propagated AE signal perpendicular to the leakage hole. The AE signals that are acquired from the direct and indirect media are analyzed, and the reliability of the indirect media-propagated AE signal are examined experimentally. By AE signal investigation, this method can be adopted to detect efficiently the leakage in welding parts.

• Journal of Technology Innovation
• /
• v.11 no.1
• /
• pp.125-145
• /
• 2003

In the knowledge-based economy, the accumulation of technological knowledge is undoubtedly the core competency to reinforce the competitiveness of individual firms and to raise the innovation capability of social and economic systems. Thus far, however, only single or fragmentary indicators, such as R&D expenditure, R&D stock, the number of researchers and the number of R&D employees have been adopted to measure the amount of technological knowledge. In this research, we suggest an approach for aggregating and structuring respective indicators. Applying correlation and factor analysis, we examine the relationship among nine conventional proxy measures for technological knowledge and present a new approach for gauging an aggregated measure.

• Korean System Dynamics Review
• /
• v.8 no.1
• /
• pp.211-227
• /
• 2007

Like the saying "You can't manage what you can't measure," performance measurement is considered as one of the most important management activities for the organizations in either private or public sector. Performance measurement, however, has thus far relied too much on financial statements. Realizing the importance of a more scientific and comprehensive performance measurement, many organizations have adopted several different systems in order to objectively estimate their balanced performance results. The Balanced Scorecard (BSC) has become a popular means to measure performance. But the BSC has also received some criticisms. In this paper four limitations in the use of the BSC are discussed : BSCs focus on unidirectional causality, are unable to distinguish delays between actions and their impacts on performance, integrate insufficiently strategy with operational measures, and lead to internal biases. We propose a system dynamics approach with causal loop diagram(CLD) to develop a Dynamic BSC in order to overcome these limitations. The results suggest that developing a BSC with system dynamics is a promising approach to supplement existing BSC frameworks.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.2
• /
• pp.146-151
• /
• 2013

Carbon nanofibers (CNFs) are electrically conductive. When CNFs are used as fillers in resin, this electrical conductivity can be yielded without adversely affecting the mechanical properties of the resin. When an elastomer is adopted as the resin, a conductive elastomer can then be produced. Due to its flexibility and conductive properties, a large strain sensor based on changes in resistivity may be produced, for strain sensing in flexible structures. In this study, a patch-type large strain sensor using resistivity change in a CNF/elastomer composite was proposed. The measurement limits of the sensor were investigated experimentally, and the limit was found to be 40%, which greatly exceeded the limits of conventional metal-foiled strain gages. Also, the proposed CNF/elastomer large strain sensor can be used to measure flexible materials, while conventional strain gages cannot be used to measure such strains.

• Proceedings of the Technology Innovation Conference
• /
• 2003.02a
• /
• pp.27-40
• /
• 2003

Though it has been recognized that the accumulation of technological knowledge has been the core competency to reinforce the competitiveness of individual firms and to raise the innovation capability of social and economic systems, only single or fragmentary variables, such as R&D expenditure, R&D stock, the number of researchers and the number of R&D employee have been adopted to measure the amount of technological knowledge. In this research, we use nine conventional technological knowledge measures under the conceptual structure of input-output framework to technological knowledge. Applying correlation and factor analysis, we examine the relationships among the nine proxy measures quantitatively and suggest the new approach for the calculation of technological knowledge index as a aggregated measure.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.169-172
• /
• 1998

A phyaical model of the Czochralski method for silicon single crystals is designed to measure the change of velocities and temperature profilles in the melt. Wood's metal(Bi 50%, Pb 26.7%, Sn 13.3%, Cd 10%, m.p. 70℃) is used to simulate the silicon melt in the crucible. To measure the local velocity change, electromagnetic probe is adopted as a velocity sensor. The output voltage of the sensor shows linear relationship to the velocity of the melt.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.569-570
• /
• 2009

An improvement of the test method is proposed to more accurately measure early-age autogenous shrinkage in concrete particularly within first 24 hours after casting. Experiments were conducted considering existing and improved method. In improved method, hydration temperature was artificially controlled to prevent thermal deformations. Test results indicate that the autogenous shrinkage calculated by existing approach is underestimated which might be due to the wrong assumption of considering the thermal dilation coefficient to be constant (equal to 10 ${\times}$ $10^{-6}/^{\circ}C$) at early-age. We recommend that the proposed method should be adopted to better assess precise value of autogenous shrinkage or an appropriate method of determining the time-evolution of thermal dilation coefficient be considered.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.24-30
• /
• 2007

The FPCs(Flexible Printed Circuit) are currently used in several electronic products like digital cameras, cellular phones because of flexible material characteristics. Because the FPC is usually small size and flexible, only one FPC should not enter chip mounting process, instead, several FPCs are placed on the large rigid pallette and enter into the chip mounting process. Currently the job of mounting FPC on the pallette is carried by totally manual way. Thus, the goals of the research is develop the automatic machine of FPC mounting on pallette using vision alignment. Instead of using two cameras or using moving one camera, the proposed vision system with only one fixed camera is adopted. Moreover, the two picker heads which can handle two FPCs simultaneously are used to make process time shortened. The procedure of operation is firstly to measure alignment error of FPC, correct alignment errors, and finally mount well-aligned FPC on the pallette. The vision technology is used to measure alignment error accurately, and precision motion control is used in correcting errors and mounting FPC.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.845-850
• /
• 2012

Currently power of the diesel engine is increasing continuously, where the wearing problems become more severe. The wearing happens irregularly inside the cylinder, which causes a high burden to the marine engine. In this paper, a novel scheme to measure the wearing and to represent the engine states has been proposed. To monitoring the states of the marine engine efficiently, a laser displacement sensor has been utilized to measure the wearing happening inside the marine engine. To eliminate the noise signals in the distance measurement, the wavelet transform has been adopted, which is robust against the noises caused by vibrations. An engine simulator is designed to develop the system for measuring the engine wears, where the superiority of the wavelet transform against the conventional filtering schemes has been demonstrated.