• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.247-256
• /
• 1998

To evalutate the change in shear bond strength according to dentin surface treatment, 4 materials were divided into control group(A) and experimental group(B). Group A was treated according to the instruction of manufacture. Group B was treated with 32% phosphoric acid. After dentin surface treatment, each material was bonded and stored in 100% humidity during 7 days, and then, the shear bond strength was evaluated. The results were as follows: 1. In the case of treatment according to the instruction of manufacture, the shear bond strength according to material showed Z-100 to be highest with 12.42 MPa, Compoglass had the lowest shear bond strength with 4.23 MPa and there was significant difference between Compoglass and Z-100, Dyract (p<0.01). 2. The group treated with 32% phosphoric acid showed lower shear bond strength than that of the group treated according to the instruction of manufacture but there was no statistical significance. 3. As a result of observation under SEM, the fracture pattern was a mixture of cohesive and adhesive failure in group 1, and there was more adhesive failure in group 2, and in group 3 and 4 there was cohesive failure of material or tooth structure. From the results above Dyract showed shear bond strength levels between resin and resin -modified glass ionomer but Compoglass showed much lower shear bond strength than that of resin-modified glass ionomer thus indicating that even though they are the same type of material they show evident differences in physical properties. And it is thought that the treatment of dentin surface with phosphoric acid did not increase the shear bond strength, unlike enamel.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1833-1836
• /
• 2008

Recently as the micro surface features become higher and diverse in their shapes, the releasing of the molded features becomes more crucial for manufacturing of the micro patterned products. The higher aspect ratio of the features or more complex shape of the features results in larger releasing force, elongation or cohesive failure of the features during the releasing. Another issue would be the uniformity of the released surface features after molding, especially for applications with large area surface. The micro patterned optical film, one of typical applications for micro surface features, consists of two layers, the thermoplastic base film and the micro formed UV resin layer. Therefore two interfaces are typically involved during the forming of this micro featured film; one is between the base film and the UV resin and another is between the resin and the pattern master. To improve the releasing of the molded surface features, the adhesive characteristic was investigated at these two interfaces. A PET film was used as a base film and two UV curable resins with different surface energy were prepared for different adhesiveness. Also the two different pattern masters were employed; one is made from brass-copper alloy and fabricated with PMMA. The adhesiveness at each interface was measured for some combinations of these base film, UV resins and the masters and the effect of this adhesiveness on the releasing was investigated.

• 대한치과교정학회지
• /
• 제37권4호
• /
• pp.283-292
• /
• 2007

새로운 접착 시스템의 개발로 브라켓의 접착 과정이 단순화되고 있는 추세이다. 본 연구에서는 통상적인 산 부식 방법과 더불어 수종의 교정용 및 수복용 self etching primer를 이용하여 브라켓을 접착한 후 전단결합강도를 측정하고 접착 파절 양상을 비교함으로써 self etching primer 유용성을 평가하였다. 교정 치료를 위해 발거한 상, 하악 소구치 75개를 레진 블록에 매몰하여 시편을 제작하였고, 산 부식이 필요한 Transbond XT primer와, 4종의 self etching primer (Transbond Plus Self Etching Primer, Unifill Bond, Clearfil SE bond, Adhese)를 각각 이용하여 브라켓을 접착한 후, 만능시험기로 전단결합강도를 측정하고, 브라켓 기저면을 광학현미경으로 관찰하여 접착 파절 양상을 관찰하였다. 접착제 잔류지수를 비교한 결과, 통계적으로 유의한 차이는 없었으나, 인산 처리군이 self etching primer 처리군에서 보다 낮은 값을 보여, self etching primer 처리군이 인산 처리군 보다 법랑질-레진 접착계면 부위에서의 파절이 많이 일어나는 경향이 있었음을 알 수 있었다. Self etching primer 처리군에서의 전단결합강도는 37% 인산 처리군의 전단결합강도보다 낮았지만(p < 0.05), 임상적으로 유용한 수준 이상이었으며, self etching primer 처리군 내에서 각각의 전단결합강도는 유의한 차이를 보이지 않았다 (p > 0.05). 따라서 self etching primer를 이용할 경우, 기존의 산 부식법에 비하여 다소 낮은 전단결합강도를 보이지만 임상적으로 충분히 사용 가능하다고 생각된다.

• 대한치과교정학회지
• /
• 제28권5호
• /
• pp.681-688
• /
• 1998

본 연구는 브라켓 간접부착술식시 레진 베이스의 표면처리에 따른 전단결합강도와 파절양상을 비교함으로써 레진 베이스 표면처리의 효과를 평가해 보기 위하여 시행되었다. 소의 하악 중절치를 포매하여 만든 90개 시편의 석고 모형에 광중합형 레진 접착제를 이용하여 금속 브라켓을 위치시킨 후 대조군은 표면처리하지 않은 반면 실험군은 레진 베이스를 Plastic Conditioner와 sandblasting으로 각각 표면 처리하여 시편에 옮겨 부착한 다음 만능물성 시험기를 이용하여 전단결합강도를 측정하고,파절양상을 관찰하여 다음과 같은 결과를 얻었다. 1. 레진 베이스를 표면처리하지 않은 경우에 비하여 Plastic Conditioner와 sandblasting으로 각각 처리한 경우 평균 전단결합강도가 높게 나타났으며 통계적으로 유의한 차이를 보였다. 2. Plastic Conditioner로 처리한 군과 sandblasting으로 처리한 군 간의 전단결합강도는 통계적 유의차를 보이지 않았다. 3. 각 군의 파절양상을 접착제 잔류지수를 통하여 비교 관찰한 결과 세 군 간에 통계적 유의차를 보이지 않았다. 4. 전단결합강도와 접착제 잔류지수 간의 상관검정 결과 전단결합강도가 높은 경우 레진 베이스와 브라켓 경계부에서의 파절이 빈번한 경향을 보였으나 그 통계적 유의성은 보이지 않았다. 이상의 실험결과는 브라켓 간접부착술식에서 결합강도 증가를 위하여 레진 베이스의 표면처리가 필요함을 시사하였다.

• Journal of Microbiology and Biotechnology
• /
• 제32권4호
• /
• pp.405-418
• /
• 2022

Simotang oral liquid (SMT) is a traditional Chinese medicine (TCM) consisting of four natural plants and is used to alleviate gastrointestinal side effects after chemotherapy and functional dyspepsia (FD). However, the mechanism by which SMT helps cure these gastrointestinal diseases is still unknown. Here, we discovered that SMT could alleviate gastrointestinal side effects after chemotherapy by altering gut microbiota. C57BL/6J mice were treated with cisplatin (DDP) and SMT, and biological samples were collected. Pathological changes in the small intestine were observed, and the intestinal injury score was assessed. The expression levels of the inflammatory factors IL-1β and IL-6 and the adhesive factors Occludin and ZO-1 in mouse blood or small intestine tissue were also detected. Moreover, the gut microbiota was analyzed by high-throughput sequencing of 16S rRNA amplicons. SMT was found to effectively reduce gastrointestinal mucositis after DDP injection, which lowered inflammation and tightened the intestinal epithelial cells. Gut microbiota analysis showed that the abundance of the anti-inflammatory microbiota was downregulated and that the inflammatory microbiota was upregulated in DDP-treated mice. SMT upregulated anti-inflammatory and anticancer microbiota abundance, while the inflammatory microbiota was downregulated. An antibiotic cocktail (ABX) was also used to delete mice gut microbiota to test the importance of gut microbiota, and we found that SMT could not alleviate gastrointestinal mucositis after DDP injection, showing that gut microbiota might be an important mediator of SMT treatment. Our study provides evidence that SMT might moderate gastrointestinal mucositis after chemotherapy by altering gut microbiota.

• 헤리티지:역사와 과학
• /
• 제55권2호
• /
• pp.200-211
• /
• 2022

청자 투각고리문 의자는 4점 일괄유물로 경기도 개성에서 출토된 것으로 전해진다. 청자 의자는 고려시대 당시 청자 제작기술의 우수성과 화려한 생활상을 보여주는 등 미술사적으로 가치가 높아 보물로 지정 관리되어 왔다. 그러나 일괄유물 중 1점의 경우 과거 수리 복원된 것으로, 처리 재료의 열화, 처리자의 미숙함 등으로 인해 미적가치가 하락되었고, 구조적으로 불안하여 재처리의 필요성이 제기되었다. 처리 전 보존상태를 조사한 결과, 물리적 손상은 전반적으로 제조상 결함부위를 중심으로 인위적 손상이 가중되어 구조적으로 취약한 상태를 보였다. 균열부위 및 탈락된 편은 접합면이 맞지 않고 접착제가 청자 표면에 흐른 자국과 접착제 표면에 분진 등 2차적 오염물이 생겨 변질된 상태였다. 수리복원 상태를 조사하기 위해 자외선과 확대현미경을 이용하여 균열부의 접합 부위의 위치와 범위, 상태를 파악하였다. 적외선분광 분석(FT-IR)과 휴대용 X-선 형광분석을 실시하여 보존처리에 사용한 재료를 분석한 결과, 접착제로 셀룰로오스계 수지와 에폭시계 수지가 사용된 것을 확인하였다. 또한 일부 힘을 받는 접합부위에서는 접합강도를 높이기 위해 접착제에 석고(CaSO₄·2H₂O) 또는 골분(Ca₁₀ (PO₄)₆(OH)₂)을 첨가한 것을 알 수 있었다. 상태조사 결과를 바탕으로, 유물의 보존처리는 기존 접합된 상태에서 전면 해체하고 물리적으로 취약한 부분을 중심으로 접합·복원을 통해 보강하는데 중점을 두었다. 기존에 사용된 접착제를 제거하고 해체한 결과, 청자 의자는 크게 상부와 하부, 굽다리, 일부 고리 문 등 총 6개 편으로 분리되었다. 해체 후 접합면에 남아 있는 잔류 접착제 및 오염물은 화학적 및 물리적으로 제거하고 스팀세척기로 파단면 세척을 통해 재접합의 효율을 높였다. 유물의 접합은 접합부위와 크기에 따라 접착제를 다르게 적용하였다. 편의 위치만 고정하는 접합부에는 시아노아크릴계 수지 Loctite^® 401을 사용하고 구조적으로 안정화시키는 부분에는 가역성을 위해 아크릴계 수지인 Paraloid^® B-72 20%(in xylene)로 단면처리한 후 에폭시계 수지 Epo-tek^® 301-2를 이용하여 접합하였다. 상·하부 접합 같이 힘을 받는 부위는 Epo-tek^® 301-2에 Kaolin을 첨가하여 접합강도를 보강하였다. 연속되는 문양으로 추정 가능한 고리문의 결실 부분은 SN-Sheet로 뼈대를 만들고 Wood epos^®로 파손단면을 연결하여 모델링하면서 고리문을 복원하였다. 그 외 접합하면서 생긴 복원 부위는 심미적 및 구조적 안정화를 위해 Wood epos^®로 메움처리하였다. 복원부위 및 메움처리한 부분은 추후 전시활용에 있어 이질감이 없도록 색맞춤하였다. 다양한 과학기술을 활용한 조사와 처리과정은 체계적으로 기록하여 보존 관리하는데 기초자료로 활용하도록 하였다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.468-476
• /
• 1998

The purpose of this study was to observe the morphologic change of dentinal surface, adhesion in interface between dentin and bonding agents, and penetration pattern of resin tags into dentinal tubles according to bonding procedure of ONE-STEP universal adhesive system. Ten extracted human molars were mounted in dental stone and sectioned to expose mid-coronal occlusal dentin and again sectioned tooth crown apically. Specimens were randomly assigned to three groups for dentin conditioning with 32% phoshoric acid, two coats of bonding agents after dentin conditioning, and bond of composite resin. The surfaces of dentin were treated with etch ant and applied bonding agent, and bonded composite resin according to the directions of manufacturer. Specimens which were boned composite were sectioned longitudinally for observing interfaces between resin and dentin. Two of specimens which were sectioned longitudinally were immersed in 6 N HCL for 30 seconds and 1% NaOCL for 12 hours to partially demineralize and deproteinize the dentin substrate. Each specimen was mounted on a brass stub, sputter-coated with gold and observed under SEM. The result were as follows : 1. On the dentinal surface which was conditioned with 32% phosphoric acid. the smear layer was completely removed. orifices of dentinal tubules were opened 3-$5{\mu}m$ wide. and dentinal surface was irregular. 2. On the dentinal surface which was applied ONE-STEP. bonding agent. resin particles were observed on the orifices of dentinal tubules and intertubular dentin. 3. There were close adaptation between dentin and resin and were the pattern which composite invaded into dentin. 4. 1-$3{\mu}m$-wide hybrid layer was visible in the interface between dentin and resin. 5. Long and funnel shaped resin tags were observed in demineralized specimens. and the surfaces of tags were rough.

• Fisheries and Aquatic Sciences
• /
• 제24권11호
• /
• pp.375-382
• /
• 2021

In this study, the reproductive behavior and embryonic and larval development of the short ninespine stickleback Pungitius kaibarae was described and illustrated based on observations during spawning, hatching, and larval rearing trials. Adult P. kaibarae were collected downstream in Jinhae during the reproductive season (April-May). Males had nuptial coloration on their entire black bodies, with blue dorsal spines and yellow eyes, whereas females had a brown spotted pattern on their bodies. Males built nests on the stems of water weeds and attracted females. Fertilization occurred in the nest immediately after spawning, and males guarded the eggs until hatching. The fertilized eggs of P. kaibarae were spherical, demersal, adhesive, and transparent, and each egg measured 1.43 ± 0.07 mm in diameter. The morula, blastula, and gastrula stages, as well as hatching began at 5, 18.5, 21.5, and 96 post fertilization (HPF), respectively, at 20.0 ± 0.5℃. The newly hatched larvae had a total length (TL) of 5.67 ± 0.50 mm, with a yolk volume of 0.583 ± 0.059 mm³. Their mouths and anuses had not yet opened. At 2 days posthatching (days post hatching, DPH), the yolk was completely absorbed and the larvae began to feed exogenously. Pigmentation was observed in freshly hatched larvae 4 h after hatching, with the presence of eight areas with a dotted pattern on the dorsal surface of the larvae and dispersed spots on the head and yolk sac. At 30 DPH, the TL of the juveniles was 21.34 ± 1.70 mm. The nest area and number of eggs were 259.56 ± 101.39 mm² (75.18-506.04) and 155.33 ± 114.12 (0-437), respectively.

• 한국인쇄학회지
• /
• 제29권2호
• /
• pp.45-58
• /
• 2011

Gravure off-set printing recently is used in electronics display market. This method has advantages of mass production and high printing speed. It is also fine pattern can be implemented. We have manufactured low-curable conductive Ag pastes for gravure off-set printing. When printing, the pastes be used different silver powder shape because of the printing characteristics. The pastes were prepared with silver powder by silver powder shape and size, epoxy resin, solvent and homogenized on a standard three-roll mill. And the pastes exhibited a shear-thinning flow at viscosity profile. Moreover the adhesive strength and resistivity of silver film had a good characteristics. With the manufactured paste in this study, touch panel had is manufactured and it had $4{\times}10-5{\Omega}.cm$.

• 한국인쇄학회지
• /
• 제29권2호
• /
• pp.1-13
• /
• 2011

The recent spotlight on electronic touch-screen display, a rapid breakthrough in the information society is evolving. Touch panel input device such as a keyboard or mouse without the use of, the on-screen character or a specific location or object on the person's hand touches a particular feature to identify the location of a panel is to be handled. The touch screen on the touch panel is used in the Ag paste is used mostly for low-curable paste. The thermal-curing paste according to the drying process of thermal energy consumption and improve the working environment of organic solvents have problems. In this study, Ag paste used in the non-thermal curing friendly and cost-effective UV curable paste was prepared. Current commercially available thermal-curable binder, was used instead of the flow characteristics of UV-curable oligomers and monomers with functional groups to give a single conductive Ag paste with the addition of a pattern could be formed. Ag paste as a result, thermal-curing adhesive, hardness, resistance and excellent reproduction of fine patterns and was available with screen printing environmentally friendly could see its potential as a patterning technology.