• 한국멀티미디어학회논문지
• /
• 제14권3호
• /
• pp.414-422
• /
• 2011

본 연구는 얇은 유전체기판 위에 프린트 패턴으로 구현하는 상/하 대칭 루프안테나에 관한 것으로서, 유전체기판 상/하에 대칭으로 루프안테나용 동박패턴을 제작하여 기판의 상/하에 프린트된 루프패턴 간에서 방사되는 전자계가 서로 충돌하지 않게 방사되는 위상제어형 상/하 대칭 루프안테나에 관한 것이다. 이 방법으로 상/하에 프린트된 각 루프코일이 서로 동위상으로 보완적으로 배치되어 전자계가 원만하게 방사되어, 방사 손실이 없고 방사 효율이 뛰어나게 된다. 앓은 유전체기판의 상/하에 프린트하여 안테나를 구현함으로 연해 경박/소형화가 가능해지며, 이로 인하여 크기 $40mm{\times}6mm$ 이하의 사이즈에, 두께 0.2mm 이하의 박막의 유전체가판에 제 3세대 휴대폰대역인 WCDMA 안테나를 구현하여 액티브 시험에서 평균게인 -3dBi 이상 방사효율 50~70% 정도의 안테나특성이 얻어졌으며, 상용되는 이동형 멀티미디어단말기에 부착하여 액티브 시험결과 평균게인 -4dBi, 송/수신 효율이 43% 얻어졌다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권4호
• /
• pp.344-350
• /
• 2011

라디에타소나무 단판적층재(LVL)를 제조함에 있어서, CuAz 및 ACQ 방부처리와 비처리, 수성비닐우레탄 접착제와 페놀변성 리조시놀수지 접착제의 상온경화형 접착제를 적용함에 따른 밀도경사, 접착 강도성능 및 내부후성(방부효력)을 살펴보았다. 결과, LVL의 밀도경사에서 접착층 주변이 원추형으로 밀도가 커지는 경사패턴을 보였다. 접착성은 수성비닐우레탄 접착의 경우, 자비반복시험 후 전층이 박리되거나, 일부 층이 박리하고 할렬 틈새 현상이 일어났다. 페놀변성 리조시놀수지 접착제 접착의 경우, 자비반복시험 후 접착층의 응력이 큰데 연유한 굽음과 상하 접착층 사이의 단판의 수직할렬 현상이 있었으나, 접착층의 박리나 할렬이 거의 발견되지 않아 침지박리접착력은 높은 것으로 판단되었다. 한편, 방부효력시험에 있어서, 수성비닐우레탄 접착제로 적층한 LVL의 경우 갈색부후균에 의한 부후도가 백색부후균보다 크게 나타났다. 페놀변성 리조시놀수지 접착제로 LVL을 제조한 경우에는 갈색부후균에 의한 질량감소가 적었고, 약제를 처리하지 않더라도 그 피해가 낮았으며, 약제처리한 것은 질량감소율 0 수준을 보일 정도로 방부효력이 큰 것을 알 수 있었다.

• 대한소아치과학회지
• /
• 제30권1호
• /
• pp.143-152
• /
• 2003

본 연구는 자가부식 접착제의 치질로의 침투와 레진 tag 형성을 알아보고 부가적인 산부식이 레진 tag 형성에 미치는 효과를 관찰하기 위하여 계획되었다. 3종의 자가부식 접착제(SE bond, AQ bond and L Pop)와 one bottle adhesive(Single bond)를 사용하였고 발거한 구치로 교합면 법랑질과 상아질 시편을 제작하였으며 각 군당 5개씩 네 개의 군으로 나눈 총 20개의 시편을 양분하여 각각 접착제를 적용하기 전 35% 인산으로 산부식하거나 산부식처리하지 않았으며 이후 레진을 적용시키고 중합하였다. 시편은 Silverstone microtome으로 절단한 후 HCl 용액과 NaOCl 용액으로 처리하고 건조시킨 후 이온으로 피복하였으며 주사전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. 부가적 산부식 처리한 상아질은 모든 자가부식 접착제군에서 산부식하지 않은 상아질보다 resin tag의 길이와 두께가 증가하는 것이 관찰되었다. 2. 법랑질에서는 L Pop을 제외하고 부가적 산부식한 군에서 레진 tag의 두께가 산부식하지 않은 군보다 컸고 보다 명확한 부식양상을 관찰할 수 있었다. L Pop에서는 부식법랑질과 비부식법랑질간의 차이가 없었다. 본 연구의 결과는 자가부식형 접착제가 법랑질을 부식시키지 않고 상아세관으로 침투하는 정도가 산부식군에 미치지 못하다는 것을 의미한다. 이와 관련하여 접착강도와 미세누출 및 레진 tag 형태에 대한 부가적 연구가 필요할 것이다.

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.479-488
• /
• 2008

The purpose of this study was to re-interpret the traditional patterns in modern point of view and connect them to the apparel textile design to use them widely in our real life. For this, a documentary research on the traditional patterns and arabesque patterns was made first, and then, through the manual and photoshop workings, two apparel textile designs were suggested. As a result, the followings were acquired: First, the arabesque pattern, which is a traditional pattern of Korea, has a continuous life power and a natural formative characteristics. In its pattern, there is an abundant possibility of change. So, it has a wide usability regardless of time and space. As the symbolic image of the arabesque pattern is connected with the instinctive beauty sense of human beings, it has shown the more adhesive affinity that any other materials. Second, two kinds of textile design were suggested. The motif of work 1, "Fragrance of Woman," was the richness and the harmony, and so a lotus arabesque pattern was selected to present its concept, "Classic Elegance." The expression technique was to use a manual work and cloths to make it a voluminous one. The motif of work 2, "Green Field" was to show the clean beauty with a lotus arabesque pattern. Its concept was the "Natural Elegance," and the expression technique was to repeat the motif by using the Adobe Photoshop to complete the work.

• 대한치과교정학회지
• /
• 제34권4호
• /
• pp.325-332
• /
• 2004

본 연구의 목적은 산부식과 전처리 과정을 결합하여 접착 단계를 단순화시킨 self-etching primer의 임상적인 유용성 을 판단하고자, self-etching primer로 브라켓을 접착하는 방법과 기존의 $37\%$ 인산으로 부식하여 접착하는 방법을 사용하여, 광중합시 사용되는 광원 및 브라켓 종류에 따른 전단결합강도와 접착파절양상에 관하여 비교 연구하는 것이다. 사람의 상하악 소구치를 포매하여 만든 시편을 부식 및 전처리 방법에 따라 각각 $37\%$ 인산으로 산부식 후 Transbond XT primer를 사용하여 접착한 군과 Transbond Plus self-etching primer를 사용하여 접착한 군으로, 광원 종류에 따라 가시광선과 plasma arc light을 이용하여 중합한 군으로 나누었고, 브라켓 종류에 따라 금속브라켓과 세라믹 브라켓을 사용하여 접착한 군으로 분류하여 각 군간의 전단결합강도와 접착파절양상을 관찰하여 다음과 같은 결과를 얻었다. 1. 광원과 브라켓 종류가 동일한 조건일 때, self-etching primer를 사용하여 접착한 군과 XT primer를 사용하여 접착한 군간의 전단결합강도는 통계적으로 유의한 차가 없었다. 2. 금속브라켓을 접착한 경우, 광원과 부식 및 전처리 방법에 따른 전단결합강도는 통계적으로 유의한 차가 없었다. 3. Self-etching primer와 XT primer를 사용하여 접착한 군 모두에서 세라믹 브라켓을 사용하여 접착한 군의 전단결합 강도는 금속브라켓을 사용하여 접착한 군보다 통계적으로 유의하게 컸다(p<0.001). 4. 접착제 잔류지수는 self-etching primer를 사용하여 접착한 군과 XT primer를 사용하여 접착한 군에서 통계적인 유의한 차가 없었으며, 세라믹 브라켓을 사용하여 접착한 군에서 금속브라켓을 사용하여 접착한 군보다 유의하게 커서, 법랑질-레진 접착 계면 부위의 파절이 더 많은 것으로 나타났다. 이상의 결과로 미루어 보아 Transbond Plus self-etching primer를 사용하여 브라켓을 접착하는 것은 적절한 결합강도를 얻으면서도 사용이 간편하고 시술 시간을 단축시킬 수 있으므로 임상적으로 유용할 것으로 판단된다.

• 대한가정학회지
• /
• 제39권8호
• /
• pp.137-154
• /
• 2001

This study was made to draft the tight fitting bodice pattern which horizontal and perpendicular stands are to be lightly set, with the consideration of characteristics of body shape in design of clothes. Measurement of body was conducted on 53 women in twenties, and observation was made on surface development pattern by adhesive tape addition method and gypsum method on three standard objects. In the study, bodice pattern was completed by using already made Somato- measurer, compared with existing bodice pattern, and the results are as follows. The result of the correlation analysis by body measurement shows that chest circumference has a relation to B$.$P-front neck point, side neck point, shoulder point, front interscye breadth point, and the item in spine scapulae point has relation to the item of back neck line, and front & back horizontal values. The degree of shoulder slant, width of armhole and of its depth, the amount of breast, back space, back length were shown to be directly measured from the body. In surface development pattern, tight-fit bodice pattern necessary to the breast volume and back space were shown to be investigated and these volume have to be given in setting up basic line for clothes design together with body measurement value. The result of sensory evaluation for appearance test on fitness shows higher value of research bodice including line of shoulder line, front and back interscye breadth, chest circumference, waist circumference, armhole circumference and of its depth, compared with the research bodice in most items. The result of this study is seen showing high effectiveness for the basic data to design the ready-made dress of high sensitivity of high value added tat.

• Journal of Mechanical Science and Technology
• /
• 제19권3호
• /
• pp.820-825
• /
• 2005

This paper proposes non-destructive ESPI technique to evaluate inside defects of semiconductor package quantitatively. Inspection system consists of ESPI system, thermal loading system and adiabatic chamber. The technique has high feasibility in non-destructive testing of semiconductor and gives solutions to the drawbacks in previous technique, time-consuming and the difficulty of quantitative evaluation. In result, most of defects are classified in delamination, from which it is inferred to the insufficiency of adhesive strength between layers and nonhomogeneous heat spread. The $90\%$ of tested samples have a delamination defect started at the around of the chip which may be related to heat spread design.

• 대한치과교정학회지
• /
• 제21권1호
• /
• pp.7-16
• /
• 1991

To estimate the possibility of the application of TiN ion-plating to the orthodontic appliance, colorimetric properties, and characteristics of ion-plated film as well as adhesive strength of TiN film to the substrate and mechanical properties of ion-plated orthodontic appliance were investigated. The obtained results were as follows: 1) TiN ion-plated film had the colorimetric properties which were the hue of about 2.5 Y, the brightness of about 6, and the chroma of about 4 by the standard color chip of JIS. 2) TiN ion-plated film was $2{\mu}m$ in thickness and its deposition pattern was rather irregular. 3) TiN phase was confirmed on the X-ray diffraction pattern. 4) Critical load for delamination of ion-plated film from stainless steel band was 10N. 5) Tensile and yield strength of ion-plated specimen was increased about 10Kg $f/mm^2$, while elongation was decreased $1\%$ compairing to the values of the non ion-plated specimen.

• Restorative Dentistry and Endodontics
• /
• 제25권2호
• /
• pp.180-192
• /
• 2000

One bottle system was recently developed in order to simplify the clinical skills and save chair time after continuous improvements on dentin bonding agents. There has been many studies to measure the bond strength of one bottle systems but no actual work has been done on micromorphologic study of resin-dentin interdiffusion zone after one bottle system application. To evaluate the bonding patterns of various commercially available one bottle systems to dentin, observation of resin-dentin interdiffusion zone under TEM was performed. Caries-free human third molars within one month of extractions were chosen for the experiments. The molars were sectioned 1mm above the cementoenamel junction and got rid of the root portions. Crown portions of the teeth were sectioned parallel to occlusal surface so that dentin discs of 1mm in thickness were remained. 7 one bottle systems and 1 two bottle system were applied according to manufacturer's instructions and followings were the results. 1. In every experimental groups, cross bandings of collagen fiber were distinguishable and tight bon dings between the bonding agents and dentin were observed. 2. Hybrid layer was clearly observed in ONE-STEP$^{(R)}$, Prime & Bond$^{(R)}$ 2.1, Syntac$^{(R)}$ SC, MAC-BOND II groups but it was not clear in Single Bond, D-Liner Dual PLUS, ONE COAT BOND groups. 3. Electron-density of hybrid layer was uniform in pattern in MAC-BOND II, Prime & Bond$^{(R)}$ 2.1 groups but not so uniform in ONE-STEP$^{(R)}$ group. 4. Electron-dense amorphous phase in most superior layer of the resin-dentin interdiffusion zone was characteristically observed in Single Bond, Syntac$^{(R)}$ SC, ONE COAT BOND groups. It can be concluded that bondings between the dentin bonding agents and dentin can be various in pattern according to their chemical compositions and the condition during applications.

• 한국의류산업학회지
• /
• 제23권1호
• /
• pp.129-141
• /
• 2021

This study investigated fabrics, washing and cares, design, pattern, subsidiary materials, and sewing methods with a focus on the functional outers using moisture-permeable waterproof fabric as a shell; in addition, each element was analyzed for differences depending on fabric type. The characteristics of 34 outers were investigated through labels, online product introductions, visual inspection, observations from two experts with more than 30 years experience and wear tests. Moisture-permeable waterproof fabrics used for the outer were classified into two types; in addition, the shell of the high-density fabric and the 2 & 3-layer fabrics had different characteristics. Various fabrics, detailed designs, and three-dimensional patterns suitable for each part of the human body were used to improve functionality. In addition, various subsidiary materials and sewing methods were used to form an organic relationship. The same washing and cares, patterns and subsidiary materials were used regardless of fabric type; however, the fabric type influenced the detailed design and sewing. The outers with high-density fabric had a loose fit, short placket, e-banded cuffs, lock-stitch, and lock-stitch+binding. However, the outer with 2 & 3 layer fabric had a slim fit, hood width adjustment, zippered pockets, cuffs with tab, seamless adhesive sewing such as laminating, lock-stitch+ seam-sealing, and welding.