• Journal of Preventive Medicine and Public Health
• /
• v.34 no.2
• /
• pp.119-126
• /
• 2001

Air pollution epidemiologic studies are intrinsically difficult because the expected effect size at general environmental levels is small, exposure and misclassification of exposure are common, and exposure is not selective to a specific pollutant. In this review paper, epidemiologic study designs and analytic methods are described, and two nationwide projects on air pollution epidemiology are introduced. This paper also demonstrates that possible confounding issues in time-series analysis can be resolved and the impact on the use of data from ambient monitoring stations may not be critical. In this paper we provide a basic understanding of the types of air pollution epidemiologic study designs that be subdivided by the mode of air pollution effects on human health (acute or chronic). With the improvements in the area of air pollution epidemiologic studies, we should emphasize that elaborate models and statistical techniques cannot compensate for inadequate study design or poor data collection.

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.237-245
• /
• 2020

The effects of the mixed two solvents, Dimethylacetamide (DMAc) and Dimethylformamide (DMF), and Polyethylene glycol (PEG) and Polyvinylpyrrolidone (PVP) as additives on performance of Polyvinylidene fluoride (PVDF) membranes were studied. Initially, PEG200 was used as a primary additive at fixed percentage of 5% wt. PVP was then blended with PEG200 in different concentrations. PVDF and DMAc were used as polymer and solvent in the casting solutions, respectively. To control the diffusion rate of PVP in the presence of PEG200 and PVP blend, mixtures of DMAc and DMF were used as the mixed solvent in the casting solutions. Asymmetric PVDF membranes were prepared via phase inversion process in a water bath and the effects of two additives and two solvents on the membrane morphology, pure water flux (PWF), hydrophilicity and rejection (R) were investigated. Attenuated Total Reflection Fourier Transform Infrared Spectra (ATR-FTIR) analysis was used to show the residual PVP on the surface of the membranes. Atomic Force Microscopy (AFM) was utilized to determine roughness of membrane surface. The use of mixed solvents in the casting solution resulted in reduction of PVP diffusion rate and increment of PEG diffusion rate. Eventually, PWF and R values reduced, while porosity and hydrophilicity increased.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.7
• /
• pp.925-931
• /
• 2002

Gibbs sampling algorithms were implemented to the multi-trait threshold animal models with any combinations of multiple binary, ordered categorical, and linear traits and investigate the amount of bias on these models with two kinds of parameterization and algorithms for generating underlying liabilities. Statistical models which included additive genetic and residual effects as random and contemporary group effects as fixed were considered on the models using simulated data. The fully conditional posterior means of heritabilities and genetic (residual) correlations were calculated from 1,000 samples retained every 10th samples after 15,000 samples discarded as "burn-in" period. Under the models considered, several combinations of three traits with binary, multiple ordered categories, and continuous were analyzed. Five replicates were carried out. Estimates for heritabilities and genetic (residual) correlations as the posterior means were unbiased when underlying liabilities for a categorical trait were generated given by underlying liabilities of the other traits and threshold estimates were rescaled. Otherwise, when parameterizing threshold of zero and residual variance of one for binary traits, heritability estimates were inflated 7-10% upward. Genetic correlation estimates were biased upward if positively correlated and downward if negatively correlated when underling liabilities were generated without accounting for correlated traits on prior information. Residual correlation estimates were, consequently, much biased downward if positively correlated and upward if negatively correlated in that case. The more categorical trait had categories, the better mixing rate was shown.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.10
• /
• pp.1484-1489
• /
• 2006

This study was carried out to investigate the effect of high pressure and the addition of non-meat proteins on the physico-chemical and binding properties of restructured pork. Pressurizations were carried out at up to 200 MPa and non-meat proteins used as a binder were isolated soy protein (ISP), sodium caseinate (SC), whey protein concentrate (WPC) and egg white powder (EWP). The pH values of all treatments were affected by the level of pressure. $L^*$-value of all treatments increased significantly (p<0.05), while both $a^*$-value and $b^*$-value of all treatments showed a significant decrease (p<0.05) with increasing pressure level. Binders could contribute only additive effects on both pH and color of the treatments. It was found that high pressure improved the water binding capacities and binding strength of the treatments. Binders also improved the binding strength of restructured pork. However, SC and WPC had no effect on water binding properties under high pressure. These results indicate that the application of high pressure had more significant effect on restructuring meat than binders.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.3
• /
• pp.279-285
• /
• 2008

CNC (Carbon Nano Colloid) was used as an additive to the positive electrode to improve the discharge performance of sealed lead-acid batteries, The cathode active material ($PbO_2$) has a relatively low utility of less than 60 % compared with other kind of batteries, such as Ni-MH and Lithium ion, In this study, to overcome the above-mentioned problem we investigated the effects of CNC addition on the enhancement of electrical connection with not-utilized $PbO_2$ and resultantly electrical conductivity of electrode, We examined low rate discharge capacities, high rate discharge capacities and internal resistances of the batteries containing various amounts of CNC. From these results, we found out that the addition of CNC into the positive electrode made a significant improvement in high rate discharge capacity, We also suggested the optimum content of CNC material in positive electrode.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.10
• /
• pp.1406-1410
• /
• 2014

Age at first calving is an important trait for achieving earlier reproductive performance. To detect quantitative trait loci (QTL) for reproductive traits, a genome wide association study was conducted on the 96 Hanwoo cows that were born between 2008 and 2010 from 13 sires in a local farm (Juk-Am Hanwoo farm, Suncheon, Korea) and genotyped with the Illumina 50K bovine single nucleotide polymorphism (SNP) chips. Phenotypes were regressed on additive and dominance effects for each SNP using a simple linear regression model after the effects of birth-year-month and polygenes were considered. A forward regression procedure was applied to determine the best set of SNPs for age at first calving. A total of 15 QTL were detected at the comparison-wise 0.001 level. Two QTL with strong statistical evidence were found at 128.9 Mb and 111.1 Mb on bovine chromosomes (BTA) 2 and 7, respectively, each of which accounted for 22% of the phenotypic variance. Also, five significant SNPs were detected on BTAs 10, 16, 20, 26, and 29. Multiple QTL were found on BTAs 1, 2, 7, and 14. The significant QTLs may be applied via marker assisted selection to increase rate of genetic gain for the trait, after validation tests in other Hanwoo cow populations.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.6
• /
• pp.754-760
• /
• 1996

Effects of washing and additives on the texture of squid surimi gel which has been known to hard to gelation due to high protease activities and many water solubles were studied by SDS-PAGE, compression test, jelly strength and transmission electron microscopy analysis (TEM). Myosin (205 kDa) heavy chain was the major protein in water soluble fractions. It was impossible to make a gel after washing of the minced squid meat. These results suggested that squid (Todarodes pacificus) minced meat does not need a washing for good jelly products. $3.0\%$ of bovine plasma protein (BPP) produced the hardest gel ($16\%$ harder than the control) among the additives including egg white (EW), potato extracts (PE) and transglutaminase-K (TG-K) by compression test (P>0.05). Microstructure of control, $2\%$ EW and $4\%$ TG-K treated gels showed a sponge-like structure with more vacant space. Gels containing $3\%$ BPP formed the most rigid and arranged networks. Those results indicates that poor gel-network formation Was due to the degradation of myofibrillar proteins by proteases contained in the minced meat, which result in non-interlinkage.

• Korean Journal of Animal Reproduction
• /
• v.22 no.1
• /
• pp.35-42
• /
• 1998

This experiment was carried out to improve in vitro development of rabbit one-cell embryos to the blastocyst stage. One-cell rabbit embryos were collected at 19\ulcorner20hr after superovulation induction and incubated at 39\ulcorner in 5% CO2 for 72hr. In order to find optimum conditions in medium that affects the rabbit embryo's development in vitro, RDH medium which mixed with RPMI1640, DMEM and Ham's F10 was compared with the previously reported mediums (Ham's F10 and RD) for embryo development and cell numbers. Three additives (BSA, taurine and glucose) were tested for the development of rabbit one-cell embryos in vitro. When the embryos were cultured in RDH medium, their development was markedly promoted as compared with Ham's F-10 or RD alone. Glucose exhibited no significant effects on embryo development and cell numbers. BSA a, pp.ared to promote transition from morula to blastocyst stage and taurine increased cell numbers of cultured embryos markedly regardless of medium. BSA and taurine together in RDH medium showed the additive effects on embryos development and cell number.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.2
• /
• pp.1-18
• /
• 1999

The purpose of this study was to compare performances of two analytical methods, the OSHA 42 and the NIOSH 5522, of quantifying total isocyanates in air. These methods were compared in terms of accuracy and precision and the detection limits using four(4) spiked samples in each of four(4) concentration levels which ranged from 0.25 to 2.0 times of the ACGIH TLV-TWA. In addition, two methods were used to as sess airborne concentrations of total isocyanates at the following processes including autobody spray painting, furniture spray painting, polyurethane foaming, urethane adhesion, UV coating, and pigment mixing. The results of this study showed that the NIOSH 5522 method was better than the OSHA 42 method in terms of accuracy, precis ion, and detection limit for quantifying airborne total isocyanates. It was also clear that the NIOSH method was capable of detecting not only monomeric but also non-monomeric isocyanates. The results of air concentrations of total isocyanates among processes studied indicate that some processes may exceed the recommended level of isocyanates. In addition, to evaluate toxicological effects of total isocyanates, it is recommended to consider additive effects of isocyanates present in mixtures.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.4
• /
• pp.361-368
• /
• 2012

The present study was conducted to develop persimmon peel, a by-product of dried persimmon manufacturing, as a feed additive via lactic acid bacteria fermentation. Pediococcus pentosaceus, Lactobacillus plantarum, and three strains of Leuconostoc mesenteroides were used as a starter culture in the solid state fermentation of persimmon peel, and antioxidant activity and total polyphenol content were assessed. Leuconostoc mesenteroides KCTC 3100 showed high antioxidant activity (p<0.05), whereas Pediococcus pentosaceus showed high total polyphenol content (p<0.05). These two strains were thus selected as starter culture strains. Glucose, sucrose and molasses were used as variables for optimization and a total 15 experimental runs were produced according to Box-Behnken design. Regarding significant effects of variables, molasses showed linear and square effects on antioxidant activity of persimmon peel fermentation (p<0.05). In conclusion, optimum concentrations of glucose, sucrose, and molasses were determined to be 4.2, 3.9 and 5.3 g/L, respectively, using a response surface model. Antioxidant activity was also improved 2.5 fold after optimization.